ASL-5W-K

MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) AS SERIES s FEATURES q q q q q q q q Flat type relay for surface mounting Super small and light weight —Height: 6.5 mm —Weight: approximately 1.5 g UL, CSA recognized Conforms to FCC Part 68 —Surge strength 1,500 V High sensitivity and low power consumption High reliability—bifurcated contacts DIL pitch terminals Plastic sealed type NO AS L – D (a) (b) (*) (c) s ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f ) (g) (h) Series Name Operation Function Number of Coil Nominal Voltage Contact Enclosure DE TF 12 W – K (d) (e) (*) (f ) AS : AS Series SI Nil : Standard type L : Latching type OR – B 05 (*) (g) (h) Nil : Single winding type D : Double winding type Refer to the COIL DATA CHART W : Bifurcated type K : Plastic sealed type B : Standard type 05 : 500 pieces Packing Orientation Packing Quantity GN NE S W Note: Actual marking omits the hyphen (-) of (*) and “-B05” AS SERIES s SAFETY STANDARD AND FILE NUMBERS UL478, 508 (File No. E45026) C22.2 No. 14 (File No. LR35579) Only UL/CSA approval markings are marked on the cover. Nominal voltage 1.5 to 48 VDC 0.5 A 2A 0.3 A 125 VAC 30 VDC 110 VDC Contact rating resistive s SPECIFICATIONS Contact Arrangement Material Style NO Item Standard Type AS-( ) W-K 2 Form C (DPDT) Single Winding Latching Type Double Winding Latching Type ASL-( ) W-K ASL-D ( ) W-K Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 Capacitance (at 1 kHz) Coil DE TF Bifurcated 2A Gold overlay silver alloy Maximum 50 mΩ (at 1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC 62.5 AV, 30 W 250 VAC, 220 VDC 2A Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature SI OR 0.01 mA 10 mVDC Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) 0.14 to 0.3 W 0.08 to 0.17 W –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) Maximum 6 ms Maximum 6 ms (set) Maximum 6 ms (reset) Time Value Operate (at nominal voltage) Release (at nominal voltage) GN 0.1 to 0.15 W NE 0.20 to 0.3 W 0.06 to 0.085 W 0.11 5 to 0.17 W Maximum 4 ms Minimum 1,000 MΩ 750 VAC 1 minute 1,000 VAC 1 minute 1,000 VAC 1 minute Insulation Resistance (at 500 VDC) between open contacts Dielectric Strength between adjacent contacts between coil and contacts Surge Strength S W 1,500 V (at 10 × 160 µs) (between coil and contacts) 1 × 108 operations minimum 1 × 107 operations minimum 2 × 105 ops. min. (0.5 A 125 VAC), 5 × 105 ops. min. (1 A 30 VDC) 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s2 (11 ±1 ms) 1,000 m/s2 ( 6 ±1 ms) Approximately 1.5 g Life Mechanical Electrical Other Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 AS SERIES s COIL DATA CHART MODEL AS-1.5 W-K AS- 3 W-K AS-4.5 W-K Standard Type AS- 5 W-K AS- 6 W-K AS- 9 W-K AS- 12 W-K AS- 18 W-K AS- 24 W-K AS- 48 W-K *1 Nominal voltage 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC Coil resistance (±10%) 16.1Ω 64.3Ω 145Ω 178Ω 257Ω 579Ω 1,028Ω 1,620Ω 2,880Ω 7,680Ω Must operate voltage*1 +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC +36.0 VDC Must release voltage*1 +0.15 VDC +0.3 VDC +0.45 VDC +0.5 VDC +0.6 VDC +0.9 VDC +1.2 VDC +1.8 VDC +2.4 VDC +4.8 VDC Nominal power 140 mW 140 mW 140 mW 140 mW 140 mW 140 mW 140 mW 200 mW 200 mW 300 mW Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. Nominal voltage 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 4.5 VDC Coil resistance (±10%) 22.5Ω 90Ω 203Ω 250Ω Set voltage*1 Reset voltage*1 -1.13 VDC -2.25 VDC -3.38 VDC Nominal power 100 mW 100 mW 100 mW 100 mW 100 mW 100 mW 100 mW NO MODEL ASL-1.5 W-K Single Winding Latching Type ASL- 3 W-K ASL-4.5 W-K ASL- 5 W-K ASL- 6 W-K ASL- 9 W-K ASL- 12 W-K ASL- 18 W-K ASL- 24 W-K ASL-D1.5 W-K ASL-D 3 W-K ASL-D4.5 W-K ASL-D 5 W-K ASL-D 6 W-K ASL-D 9 W-K ASL-D 12 W-K ASL-D 18 W-K ASL-D 24 W-K DE 12 VDC 18 VDC 24 VDC 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC TF SI P S P S P S P S P S P S 360Ω 810Ω OR +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +6.75 VDC +4.5 VDC +9.0 VDC 1,440Ω 2,160Ω 3,840Ω P 11.25Ω 45Ω 45Ω 101Ω 125Ω 125Ω 180Ω 180Ω 405Ω 405Ω 720Ω 720Ω 101Ω S 11.25Ω GN +13.5 VDC +18.0 VDC +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC NE -4.5 VDC -9.0 VDC -6.75 VDC -13.5 VDC -18.0 VDC +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC -3.75 VDC Double Winding Latching Type S W 150 mW 150 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 300 mW 300 mW +4.5 VDC +6.75 VDC +6.75 VDC +9.0 VDC +9.0 VDC +13.5 VDC +13.5 VDC +18.0 VDC +18.0 VDC P 1,080Ω S 1,080Ω P 1,920Ω S 1,920Ω Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. P: Primary coil S: Secondary coil 3 AS SERIES s CHARACTERISTIC DATA Please see A relays. s REFERENCE DATA  z
~  P   100 80 AS-5W-K n=100 Make Break 60 40 20 0 10 20 30 40 50 60 Distribution of Contact Resistance NO 70 Distribution(%) ContactResistance(mΩ) DE 80 TF SI OR GN NE S W 4 AS SERIES s DIMENSIONS q Schematics (TOP VIEW) AS, ASL type (Non-latching type, single winding latching type) q Dimensions q PC board mounting pad layout (TOP VIEW) ASL-D type (Double winding latching type) NO s RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) DE TF SI OR GN NE Unit: mm S W Note: 1. Temperature profiles show the temperature of the PC board surface. 2. Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. 5 AS SERIES s PACKING (1) PACKING METHOD (ONLY TAPE PACKING IS AVAILABLE) • Taping standards : JIS C 0806 and • Packing orientation code : B RC - 1009B (EIAJ) • Tape type : TB2416 or TE2416 • Reel type : R24D Orientation mark side • Quantity of 1 reel : 500 pieces Feeding (2) DIMENSIONS (in mm) • REEL DIMENSIONS NO • TAPE DIMENSIONS ø 1.55 DE Fujitsu Components International Headquarter Offices TF SI Note: Relays are sold in packs of 500 pieces, please order 500 pieces as one unit. OR Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com GN S Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com NE W Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 6