FAR-C4CP-16000-K21-R

FUJITSU SEMICONDUCTOR DATA SHEET DS07-10204-1E Resonator Piezoelectric Resonator (4 to 16 MHz) FAR Family (C4 series P/Q type) For Motor Application s DESCRIPTION Fujitsu resonators C4 series (P/Q type) feature single crystals with a high electro-mechanical coefficient (LiNbO3: lithium niobate), the result is very compact packaging. C4 series (P/Q type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount and suitable for motor appication due to its high reliability package. s FEATURES • • • • • Wide frequency range in 4 to 16 MHz Suitable for microcomputer clock PCT (121 °C, 2 atms, 96 hours) is guaranteed for Motor application. Emboss-typed pack for automatic mounting Superior shock and vibration resistance, preventing damage during automatic mounting s PACKAGE F 4.00 NMK K F 8.00N A FAR Family (C4 series P/Q type) s STANDARD CHARACTERISTICS Series Parameter Material Frequency Standard frequency Initial frequency deviation Temperature characteristic (–40°C to +105°C) C4 series (P/Q type) Lithium Niobate (LiNbO3) 4 to 16 MHz See “s Standard Frequency.” ±0.5% (M) ± 0.9 % (M) 1.0 The ±0.3% (K) version can also be produced. Reference temperature: +25°C 10±4 pF, 30±8 pF are also available. Capacity is specified by Fujitsu, considering matching data with applied IC (mainly microcomputer). For ten years at room temperature Unsturated PCT: 121°C 2 atomospheric pressures Remarks Capacity of built-in capacitor Aging stability PCT Operating temperature Storage temperature Standard measuring circuit 20±8 pF (standard) Within ±0.1% 96 hours guaranteed –40°C to +105°C –55°C to +105°C • Resonant frequency 1 MΩ 4 MHz to 10 MHz IC: MB84069B×2 10 MHz to 16.0 MHz IC: MC74HC04×2 • VCC: 5 V DC • R: Resonator • C1, C2: Loading capacitors (built-in) R C1 C2 FAR • Serial resonant resistance R 75 Ω OSC C1 C2 75 Ω LM R: Resonator Measuring instrument: Network analyzer 2 FAR Family (C4 series P/Q type) s STANDARD FREQUENCY Standard frequency (kHz) 4,000 8,000 10,000 12,000 16,000 Package size P Resonant resistance 150 Ω max. (Symbol: 01) 75 Ω max. (Symbol: 02) Q Notes: • Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is from 4 to 16 MHz. • Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance according to applied frequency. (See “• Frequency and standard resonant resistance.”) • Frequency and standard resonant resistance Frequency 4.00 to 5.99 MHz 6.00 to 16.00 MHz Standard resonant resistance 150 Ω max. (Symbol: 1) 75 Ω max. (Symbol: 2) s NOTES ON USE • Handle carefully • Solder under the following conditions. 5 seconds max. at 230°C (PCB) Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator. • Avoid extreme fluctuations in temperature. • There is no specific direction in resonator mounting. • Oscillation data should be examined when used in oscillation circuit with microcomputer or other ICs. • This is for reflow solder, not for flow solder. 3 FAR Family (C4 series P/Q type) s PART NUMBERING SYSTEM FAR — C 4 C — (1) (2) (3) — (4) — (5) (6) (7) (8) (9) (1) Series Series C4 (2) Package Type Specification C (3) Package Size Specification P Q (4) Frequency (Example) Unit: kHz (Specify in five digits.) Frequency 8.000 MHz See “s Standard Frequency”. (5) Initial Frequency Deviation Specification K M (6) Built-in Capacitor Specification 0 1 2 Capacitance 20±8 pF 10±4 pF 30±8 pF Deviation ±0.3% ±0.5% Specification 08000 Size Large (4.0 to 5.9 MHz) Small (6.0 to 16.0 MHz) Type CHIP Single crystal LiNbO3 Capacitator With built-in capacitator 4 FAR Family (C4 series P/Q type) (7) Resonant Resistance Specification 1 2 (8) User-specific Special Symbols Specification Name — A to Z (9) Taping Specification Specification R Description 16 mm wide emboss tape (3,000 pcs) Description No specifications, no taping specification No specifications, with taping specification Serial number for custom design Resonant resistance 150 Ω 75 Ω 5 FAR Family (C4 series P/Q type) s MARKING Frequency (MHz) Fujitsu logo F 8.00 NMK Lot No. (Date of manufacture, conforms to EIAJ) Material symbol N: LiNbO3 Initial frequency deviation Note: The marking color varies with the capacitance of the built-in capacitator. Capacitance 10 pF 20 pF 30 pF Marking color Yellow White Gray Data code (EIAJ standard) is specified as follows in four-year cycle. Year Month Symbol Year Month Symbol Year Month Symbol 1 2 3 4 5 1997 2001 6 7 8 9 10 11 12 A B C D F G H I J K L M 1998 2002 1 2 3 4 5 6 7 8 9 10 11 12 N P Q R S T U V W X Y Z 1999 2003 1 2 3 4 5 6 7 8 9 10 11 12 j d e f a b Year Month Symbol 1 2 3 4 5 6 7 8 9 10 11 12 r t u n 2000 2004 6 FAR Family (C4 series P/Q type) s PIN ASSIGNMENT (1) (2) (3) (1) (3) (2) s DIMENSIONS L1 W1 0.5 L 2.54 2.54 Unit: mm Size P Q L 10.0 8.0 L1 9.4 7.4 W 1.5 2.5 W 4.5 3.2 W1 3.3 2.6 7 FAR Family (C4 series P/Q type) s TAPING FORM AND DIMENSIONS 4.0×10 = 40±0.2 4.0±0.1 φ1.5± 0.1 0 1.5±0.1 2.1±0.1 W 5.0 3.7 10.5 8.5 t 3.0 2.8 18.0±1.5 φ80 2.0±0.5 Unit: mm P, Q 3,000 φ330 ±0.2 7.65 (6.85) ±0.2 8.0±0.1 Package size P Reel form Q 2.0±0.5 φ13.0±0.5 φ21.0±0.8 R1.0 16.0±0.2 2.0±0.1 W±0.1 ±0.1 ⋅ Pack quantity Package size Quantity 8 FAR Family (C4 series P/Q type) FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F9705 © FUJITSU LIMITED Printed in Japan 12