FBR211

MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES n FEATURES l RoHS compliant l l l l l l l 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts International terminal pitch of one inch grid terminal layout High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) Conforms to FCC 68.302 (high dielectric strength type) UL recognized (File number E63615) CSA recognized (File number LR64026) RoHS compliant since date code: 0433A Please see page 5 for more information To be n ORDERING INFORMATION [Example] (a) (b) Di FBR211 S A (a) (b) (c) D012 (d) U–P (e) (f ) FBR211 sc 2 (g) Series Name Enclosure on (–CSA) (h) S: Flux free type N: Plastic sealed type (c) Coil Power and Schematics A: Standard A type (nominal power 450 mW type) B: Standard B type C: High sensitivity C type (nominal power 200 mW type) E: High sensitivity E type } Ti } nu (d) (e) (f ) (g) (h) Nominal Voltage UL Marking on Cover Contact Material Special Type CSA Marking (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) Nil : No UL marking U : UL marking P : Gold-overlay silver-palladium M : Gold-overlay silver Nil : Standard 2 : High dielectric strength type Nil : Standard -CSA : UL + CSA marking (valid when (e) is U) eD Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P 1 FBR211 SERIES n COIL DATA CHART 1. STANDARD (A or B type) MODEL A type Flux free Plastic sealed B type Flux free Plastic sealed Nominal voltage 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC Nominal Coil current Must resistance (at nominal operate (±10%) voltage) voltage approx. 5Ω 20 Ω 56 Ω 80 Ω 180 Ω 320 Ω 1,280 Ω 300 mA 150 mA 89 mA 75 mA 50 mA 38 mA 19 mA 70% max. 10% min. of nominal of nominal voltage voltage 150% of Approx. Approx. nominal 450 mW 45 deg voltage (at nominal (at nominal voltage) voltage) Must release voltage Maximum allowable voltage Nominal power Coil temperature rise FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n Note: All values in the table are measured at 20°C. 2. HIGH SENSITIVITY (C or E type) MODEL C type Flux free Plastic sealed E type To be Flux free Plastic sealed FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n Di Nominal voltage 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC sc Nominal Coil current Must resistance (at nominal operate (±10%) voltage) voltage approx. 12 Ω 45 Ω Must release voltage Maximum allowable voltage Nominal power Coil temperature rise 120 Ω 180 Ω 400 Ω 12 VDC 24 VDC 700 Ω 2,800 Ω on 67 mA 42 mA 33 mA 23 mA 9 mA 17 mA 125 mA 70% max. 10% min. of nominal of nominal voltage voltage Note: All values in the table are measured at 20°C. Ti 225% of Approx. Approx. nominal 200 mW 25 deg voltage (at nominal (at nominal voltage) voltage) nu eD 2 FBR211 SERIES n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Current Standard (A or B type) 1 form C (SPDT) Gold-overlay silver-palladium / gold-overlay silver Maximum 100 mΩ (at 0.1 A 6 VDC) 0.5 A 120 VAC or 1 A 28 VDC 2A 60 VA or 28 W 220 VAC or 150 VDC 1.25 A (AC) or 2 A (DC) Plastic sealed 1 mA, 1V Flux free 1 mA, 5V Approximately 450 mW Approximately 315 mW maximum –25°C to +55°C (no frost) 45 to 85%RH Maximum 5 ms Maximum 5 ms 5 × 106 operations minimum Approximately 200 mW Approximately 140 mW maximum –25°C to +75°C (no frost) 2 High sensitive (C or E type) Coil To Maximum Switching Power Max. Switching Voltage* 1 Maximum Switching Current Minimum Switching load* (reference) Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operating Humidity be Time Value Life Operate (at nominal voltage) Mechanical Release (at nominal voltage) Electrical (Refer to the REFERENCE DATA) Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Di 3 × 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 × 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 × 105 operations minimum (at 0.5 A/120 VDC resistive load) 10 to 55 Hz (double amplitude of 1.5 mm) 100 m/s2 (11±1 ms) Approximately 4 g 1,000 m/s2 (11±1 ms) sc on Ti 60 m/s2 (11±1 ms) *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. nu eD n INSULATION Item Isolation (initial) Dielectric Strength Standard (A or B) Minimum 100 MΩ (at 500VDC) 500VAC 1 min. (standard) 1,500VAC 1 min. (high isolation coil and contact) High sensitive (C or E) n SAFETY STANDARDS Type UL CSA Compliance UL 110 E63615 C22.2 No. 14 LR 40304, LR 46016 Contact rating Flammability: UL 94-V0 (plastics) 0.5A, 120VAC (resistive) 1A, 28VDC (resistive) 3 FBR211 SERIES n Range of operation temperature and voltage (Standard 0.45 W type) Nominal voltage multiplying factor (%) CHARACTERISTIC DATA (Data) assumes that the maximum allowable temperature of E type insulation coil is 115°C Range of operation temperature and voltage (high sensitive 0.2 W type) ge volta coil able llow ma imu Max Operate and release time data 5 4 3 2 Release time 1 0 Not including bounce time Op era Nominal voltage multiplying factor (%) 140 130 120 110 100 90 80 70 140 130 120 110 100 90 80 70 Time (msec) 160 150 160 150 Operating voltage range Operating voltage range (Data) assumes that the maximum allowable temperature of E type insulation coil is 115°C Coil temperature rise (°C) 60 50 40 30 20 0.2 0.4   (○ AC contact rating) ( DC contact rating) DC resistive load 1.0 Service life (operations) 70 To Must (at 20°C) –10 0 10 20 30 40 50 60 70 80 Operating temperature (°C) Coil temperature rise data Contact load current (A) Coil power (W) n REFERENCE DATA Distribution of operate and release voltage 60 50 Distribution (%) um xim Ma opera e ag olt il v co le ab ow all te tim e ltage te vo o Must perate volta ge –10 0 10 20 30 40 50 60 70 80 0.2 Operating temperature (°C) Coil power (W) 0.4 0.6 0.8 be 0.8 Maximum switching capacity AC resistive load (x104) 200 100 50 Life curve Standard (0.45 W type) High sensitive (0.2 W type) Di 0.5 0.3 0.1   0.6 10 sc 20 30 12 V DC resistive load 10 5 28 V DC resistive load 50 Contact load current (A) FBR211 n = 100 Operate Release 100 Distribution of operate and release time FBR211 n = 100 Operate Release on 120 120 V AC resistive load 1 80 Distribution (%) Ti 80 60 40 20 0 0 10 0 Contact load current (A) 0.5 1.0 1.5 2.0 Distribution of contact resistance 40 30 60 40 20 10 0 0 10 20 30 40 50 60 70 80 20 0 0 1 2 3 4 5 6 7 8 Distribution (%) nu 20 30 40 50 eD 60 70 80 FBR211 n = 100 Nominal voltage multiplying factor (%) Time (ms) Contact resistance (mΩ) 4 FBR211 SERIES n DIMENSIONS 1. STANDARD (Flux free type) Dimensions 10.1 +0.5 Schematics (BOTTOM VIEW) 15.1 +0.5 (A type or C type) 1 3.2 (B type or E type) 1 12 56 87 10.5+0.5 5 8 6 7 12 0.3 2. N-TYPE (Plastic sealed type) Dimensions 11.7 +0.5 To 7.62 (1.24) 0.6 0.35 (1.2) 10.16 2.54 10.7+0.5 be 0.6 (1.9) Schematics (BOTTOM VIEW) 16.5 +0.5 (A type or C type) 1 5 8 6 7 (B type or E type) 1 12 56 87 0.3 7.62 (2.04) Di 10.16 3. PC BOARD MOUNTING HOLE LAYOUT 6–ø1.0 sc 2.54 3.2 12 PC board mounting hole layout (BOTTOM VIEW) on Ti 10.16 2.54 nu 7.62 eD Unit: mm 5 FBR211 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l To 2. Recommended Lead Free Solder Profile l be Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: Di sc maximum 120˚C dip within 5 sec. at 260˚C soler bath on Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. Ti nu We highly recommend that you confirm your actual solder conditions eD 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ To ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. be Di sc on Ti nu eD 7