FBR21D12-P

MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR20 SERIES s FEATURES q TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D q q q q q q q Microminiature size Two FBR20 Series relays can be mounted in the space required for a single FBR210 Series relay. 2 A carrying current Strong shock resistance Even with 500 m/s2 shock, FBR20 Series relays never miss an operation. Easy pattern design Separate location of drive (coil) and output (contact) terminals allows easy PC board pattern design. Formed terminals for temporary mounting The uniquely designed terminals allow FBR20 Series relays to be mounted temporarily on PC boards. Conforms to FCC68.302 (high dielectric strength type) UL recognized (File No. E63615) Tube packaging NO s ORDERING INFORMATION [Example] FBR21 N (a) (b) D12 (c) U –P (d) (e) (–02) (f ) (a) (b) Series Name (Contact Style) Enclosure FBR21: FBR20 Series (single contact) FBR22: FBR20 Series (bifurcated contact) Nil: Flux free type N: Plastic sealed type (c) Nominal Voltage (Example) D03: 3 VDC D05: 5 VDC D12: 12 VDC (refer to the COIL DATA CHART) Nil: Standard U: UL114 recognized (d) (e) (f) UL Standard Contact Material P: Gold-overlay silver-palladium Special Type Nil: Standard 02: High dielectric strength type (1,000 VAC) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21D05-P Stamp: 21D05-P 1 FBR20 SERIES s SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) Nominal voltage 1.5 to 24 VDC Contact rating s SPECIFICATIONS Item Contact Arrangement TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D 1 form C (SPDT) Material Gold-overlay silver-palladium Resistance (initial) Rating (resistive) Maximum 100 mΩ (at 0.1 A 6 VDC) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) 2A Maximum Carrying Current Maximum Switching Power Maximum Switching 60 VA or 24 W Voltage*1 125 V 1A Maximum Switching Current Minimum Switching (reference) Capacitance (reference) Load*2 Plastic sealed 1 mA 1V Flux free 1 mA 5V Plastic sealed 0.1V 100 µA Flux free 1V, 1mA Approximately 2 pF (between coil and contacts) Approximately 1 pF (between open contacts) Approximately 0.3 W Coil Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operating Humidity Approximately 0.192 W maximum –30°C to +65°C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Resistance (initial) Maximum 2 ms Insulation Minimum 100 MΩ (at 500 VDC) Dielectric Strength Between coil and contacts Between open contacts 500 VAC for 1 minute (standard) 1,000 VAC for 1 minute (high dielectric strength type) 500 VAC 1 minute Surge Strength (high dielectric strength) 1,500 V (10 × 700 µs) (between coil and contacts) 5× 10 6 NO 1 A 24 VDC resistive 0.5 A 30 VAC resistive Single contact type Bifurcated contact type 1,500 V 750 V 10µs 700µs Life Mechanical operations minimum Electrical (refer to the REFERENCE DATA) 2 × 105 operations minimum (at contact rating) Other Vibration Resistance Shock Resistance Weight 10 to 55 Hz (double amplitude of 3.0 mm) Misoperation Endurance 500 m/s2 (11±1 ms) 1,000 m/s 2 (11±1 ms) Approximately 1.7 g *1 *2 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR20 SERIES s COIL DATA CHART Nominal Coil current Must Nominal Single contact type Bifurcated contact type resistance (at nominal operate voltage ±10% voltage) voltage Flux free Plastic sealed Flux free Plastic sealed approx. FBR21D01-P FBR21ND01-P FBR22D01-P FBR22ND01-P 1.5 VDC FBR21D03-P FBR21ND03-P FBR22D03-P FBR22ND03-P FBR21D05-P FBR21ND05-P FBR22D05-P FBR22ND05-P FBR21D06-P FBR21ND06-P FBR22D06-P FBR22ND06-P FBR21D09-P FBR21ND09-P FBR22D09-P FBR22ND09-P FBR21D12-P FBR21ND12-P FBR22D12-P FBR22ND12-P FBR21D18-P FBR21ND18-P FBR22D18-P FBR22ND18-P FBR21D24-P FBR21ND24-P FBR22D24-P FBR22ND24-P 3 VDC 5 VDC 6 VDC MODEL Must release voltage Maximum allowable voltage Coil Nominal temperature power rise TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D 120 W 9 VDC 270 W 12 VDC 18 VDC 24 VDC 480 W 25 mA 1,080 W 1,920 W 17 mA 12.5 mA Note: All values in the table are measured at 20°C. NO Contact load current (A) 2.0 7.5 W 30 W 83 W 200 mA 100 mA 60 mA 80% max. 5% min. 50 mA of nominal of nominal voltage voltage 33 mA 160% of Approx. Approx. nominal 300 mW 45 deg voltage (at nominal (at nominal voltage) voltage) s CHARACTERISTIC DATA 170 160 150 140 130 120 110 100 90 80 70 Range of operation temperature and voltage (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C im um all ow ab M Maximum switching capacity Life curve Nominal voltage multiplying factor (%)  ŒAC resistive load ( AC contact rating) DC resistive load ( DC contact rating) (x104) 200 100 1.0 Œ Service life (ops.) Operating voltage range Mus t ope ax 50 30 Œ 24 V DC resistive load rate ge volta le co il v 0.5 0.3 0.2 olt ag  10 5 e 120 V AC resistive load 0.1 –10 0 10 20 30 40 50 60 70 1 10 20 30 50 120 200 0 0.5 1 1.5 2 2.5 Operating temperature (˚C) Contact load voltage (V) Contact load current (A) s REFERENCE DATA 60 Distribution of operate and release voltage Operate Release Distribution of operate and release time 100 Operate Release Distribution of contact resistance 80 50 80 60 Distribution (%) Distribution (%) 40 60 Distribution (%) 30 40 40 20 20 10 20 0 0 10 20 30 40 50 60 70 80 0 0 1 2 3 4 5 6 7 8 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) Time (ms) Contact resistance (mΩ) 3 FBR20 SERIES s DIMENSIONS qDimensions qPC board mounting hole layout (BOTTOM VIEW) Flux free type 9.8+0.2 7.4+0.2 2.54 5.08 6–ø0.8 TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D qSchematics (BOTTOM VIEW) 1 2 4 4 NO (1.2 Max.) 9.7+0.3 2.54 5.08 5.08 (1.3 Max.) 8 7 5 Plastic sealed type 10.7+0.2 8.2+0.2 4 9.7+0.3 2.54 5.08 (1.7 Max.) 5.08 (1.7 Max.) qTube carrier 17.6 Max. 10.8 Max. 520 Max. Flux free type:50pcs/Tube Plastic sealed type:40pcs/Tube Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 5.08 Unit: mm 4