FBR21NH18-P

MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR20H SERIES s FEATURES q TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D q q q q q q Low power consumption High efficiency electromagnetic circuit saves power consumption. Nominal power consumption: 200 mW Operate power consumption: 112 mW Strong shock resistance Even with 500 m/s2 shock, FBR20H Series relays never miss an operation. High dielectric strength type available (conforms to FCC68.302) Dielectric strength between coil-contact: AC 1,000 V Surge strength between coil-contact: 1,500 V Easy pattern design Separate location of drive (coil) and output (contact) terminals allows easy PC board pattern design. Formed terminals for temporary mounting The uniquely designed terminals allow FBR20H Series relays to be mounted temporarily on PC boards. UL recognized (File No. E63615) Tube packaging NO s ORDERING INFORMATION [Example] FBR21 N (a) (b) H12 (c) U –P (d) (e) (–02) (f ) (a) (b) Series Name (Contact Style) Enclosure FBR21: FBR20H Series (single contact) FBR22: FBR20H Series (bifurcated contact) Nil: Flux free type N: Plastic sealed type (c) Nominal Voltage (Example) H03: 3 VDC H05: 5 VDC H12: 12 VDC (refer to the COIL DATA CHART) No designation: standard U: UL114 recognized (d) (e) (f) UL Standard Contact Material P: Gold-overlay silver-palladium Special Type Nil: Standard 02: High dielectric strength type Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21H05-P Stamp: 21H05-P 1 FBR20H SERIES s SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) Nominal voltage 1.5 to 24 VDC Contact rating 1 A 24 VDC resistive 0.5 A 30 VAC resistive TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D Item Single contact type Bifurcated contact type Contact Arrangement Material 1 form C (SPDT) Gold-overlay silver-palladium Resistance (initial) Rating (resistive) Maximum 100 mΩ (at 0.1 A 6 VDC) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) Maximum Carrying Current Maximum Switching Power Maximum Switching 2A 60 VA or 24 W Voltage*1 125 V 1A Maximum Switching Current Minimum Switching (reference) Capacitance (reference) Load*2 Plastic sealed 1 mA 1 V Flux free 1 mA 5 V Plastic sealed 100 µA 0.1 VDC Flux free 1 mA 1 VDC Approximately 2 pF (between coil and contact) Approximately 1 pF (between open contacts) Approximately 0.2 W to 0.25 W (24 V coil) Coil Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operating Humidity Approximately 0.112 W to 0.14 W maximum (24 V coil) –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Resistance (initial) Maximum 2 ms Insulation Minimum 100 MΩ (at 500 VDC) Dielectric between coil and contacts Strength between open contacts 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) 500 VAC 1 minute Surge Strength (high dielectric strength type) 1,500 V (10 × 700 µs) s SPECIFICATIONS NO 1.500 V 750 V 10 µs 700 µs Life Mechanical 5 × 106 operations minimum Electrical (refer to the REFERENCE DATA) 2 × 105 operations minimum (at contact rating) 10 to 55 Hz (double amplitude of 3.0 mm) Other Vibration Resistance Shock Resistance Weight Misoperation Endurance 500 m/s2 (11±1 ms) 1,000 m/s2 (11±1 ms) Approximately 1.7 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR20H SERIES s COIL DATA CHART Nominal Coil current Must Nominal Single contact type Bifurcated contact type resistance (at nominal operate voltage ±10% voltage) voltage Flux free Plastic sealed Flux free Plastic sealed approx. FBR21H01-P FBR21NH01-P FBR22H01-P FBR22NH01-P 1.5 VDC FBR21H03-P FBR21NH03-P FBR22H03-P FBR22NH03-P FBR21H05-P FBR21NH05-P FBR22H05-P FBR22NH05-P FBR21H06-P FBR21NH06-P FBR22H06-P FBR22NH06-P FBR21H09-P FBR21NH09-P FBR22H09-P FBR22NH09-P FBR21H12-P FBR21NH12-P FBR22H12-P FBR22NH12-P FBR21H18-P FBR21NH18-P FBR22H18-P FBR22NH18-P FBR21H24-P FBR21NH24-P FBR22H24-P FBR22NH24-P 3 VDC 5 VDC 6 VDC 9 VDC MODEL Must release voltage Maximum allowable voltage Coil Nominal temperature power rise Distribution (%) Distribution (%) 40 60 Distribution (%) TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D 180 Ω 405 Ω 33 mA 75% max. 10% min. of nominal of nominal voltage voltage 22 mA 17 mA 11 mA 200% of Approx. Approx. nominal 200 mW 35 deg voltage (at nominal (at nominal voltage) voltage) 12 VDC 18 VDC 24 VDC 720 Ω 1,620 Ω 2,300 Ω 10 mA 180% 250 mW 40 deg Note: All values in the table are measured at 20°C. NO 11 Ω 45 Ω 125 Ω 136 mA 67 mA 40 mA s CHARACTERISTIC DATA Range of operation temperature and voltage le wab allo um xim Ma 160 150 140 130 120 110 100 90 80 70 Maximum switching capacity (x104) 200 100 50 30 Life curve Nominal Voltage Multiplying Factor (%) Contact load current (A) 1.0 Œ Service life (ops.) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C 2.0  ŒAC resistive load ( AC contact rating) DC resistive load ( DC contact rating) Œ 24 V DC resistive load age volt coil 0.5 0.3 0.2  10 5 Operating voltage range pe ust o rate volta ge 120 V AC resistive load M 0.1 –10 0 10 20 30 40 50 60 70 80 Operating temperature (˚C) 10 20 30 50 120 200 1 0 0.5 1 1.5 2 2.5 Contact load voltage (V) Contact load current (A) s REFERENCE DATA 60 Distribution of Operate & Release Voltage Operate Release Distribution of Operate & Release Time 100 Operate Release Distribution of Contact Resistance 80 50 80 60 30 40 40 20 20 10 20 0 0 10 20 30 40 50 60 70 80 0 0 1 2 3 4 5 6 7 8 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) Time (ms) Contact Resistance (mΩ) 3 FBR20H SERIES s DIMENSIONS qDimensions qPC board mounting hole layout (BOTTOM VIEW) Flux free type 9.8+0.2 7.4+0.2 2.54 5.08 6–ø0.8 TF DE OR SI NE GN W TO DI S SC BE ON TIN UE D qSchematics (BOTTOM VIEW) 1 2 4 NO (1.2 Max.) 5.08 8.2+0.2 4 9.7+0.3 2.54 5.08 (1.3 Max.) 8 7 5 Plastic sealed type 10.7+0.2 4 9.7+0.3 2.54 5.08 (1.7 Max.) 5.08 (1.7 Max.) qTube carrier 17.6 Max. 10.8 Max. 520 Max. Flux free type:50 pcs/Tube Plastic sealed type:40 pcs/Tube Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 4 5.08