FBR244G00902CT

FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES s FEATURES q q q q q Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level switching. Conforms to FCC68 standards High voltage relays are also available with dielectric strength greater than 1,000 VAC and surge strength greater than 1,500 V. Formed terminals for temporary mounting Kink terminals enable FBR240 Series relays to be mounted temporarily on a PC board. Automatic mounting Shipped in carrier case plastic magazine suitable for automatic mounting. UL and CSA recognized NO FBR244 N (a) (b) s ORDERING INFORMATION [Example] (a) (b) (c) (d) DE D (c) TF 012 / 02C (d) (e) Series Name Enclosure Coil Type Nominal Voltage SI Nil N D G T E S P Nil -2 FBR244: FBR244 Series : Flux free type : Plastic sealed type : Standard (nominal power 0.5 W type) : G type (nominal power 0.55 W type) (Example) Standard (Example) G type 003: 3 VDC 005: 4.5 VDC 012: 12 VDC 009: 9 VDC (refer to the COIL DATA CHART) 02C : 2 form C (DPDT) : Bifurcated, gold-overlay silver contact : Bifurcated, gold-overlay silver-palladium contact : Single, gold-overlay silver contact : Single, gold-overlay silver-palladium contact : Standard : High dielectric strength type NE GN W S S (f ) -2 -CSA (g) (h) OR (e) (f) Contact Arrangement Contact Style and Contact Material (g) (h) Special Type Safety Specification Nil : Standard -UL : UL114 recognized -CSA : UL114 + CSA recognized Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR244D012/02CE Stamp: 244D012/02CE 1 FBR244 SERIES s SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage 3 to 48 VDC Contact rating 2 A 28 VDC resistive 0.5 A 120 VAC resistive s SPECIFICATIONS Item Contact Arrangement Style S contact 2 form C (DPDT) Single Gold-overlay silver Gold-overlay silver-palladium Bifurcated Gold-overlay silver Gold-overlay silver-palladium P contact T contact E contact Material Resistance (initial) Ratings Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 NO Maximum 100 mΩ (at 0.1 A 6 VDC) Maximum Switching Current Min. applicable Plastic sealed load*2 (Reference) Flux free Coil Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operating Humidity Time Value Operate (at nominal voltage) Release (at nominal voltage) Insulation Resistance (initial) Dielectric Strength Between coil and contacts Between open contacts Surge Strength DE TF 2A 0.5 A 120 VAC or 1 A 30 VDC (resistive load) 60 AV or 30 W 220 VAC or 150 VDC 1.25 A (AC) or 2 A (DC) 1 mA 5 VDC 5 mA 5 VDC SI 20 × 106 500 × 100 × Approximately 0.5 W to 0.58 W (standard), approximately 0.55 W (G type) Approximately 0.28 W (standard), approximately 0.25 W (G type) –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Maximum 6 ms Maximum 3 ms Minimum 100 MΩ (at 500 VDC) 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) 500 VAC 1 minute NE GN W S 1,500 V 750 V 10 µs operations minimum operations minimum (at contact rating) operations minimum (at contact rating) OR 1 mA 1 VDC 1 mA 5 VDC 1 mA 1 VDC 1 mA 5 VDC 0.1 mA 0.1 VDC 1 mA 1 VDC 1,500 V (at 10 × 700 µs) 700 µs Life Mechanical Electrical (refer to the REFERENCE DATA) DC AC 10 3 10 3 Other Vibration Resistance Shock Resistance Weight Misoperation Endurance 10 to 55 Hz (double amplitude of 1.5 mm) 200 m/s2 (11 ±1 ms) 1,000 m/s2 (11 ±1 ms) Approximately 4.5 g * If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 1 FBR244 SERIES s COIL DATA CHART 1. STANDARD (D type) MODEL s S, P, T, E Flux free FBR244D003/02s FBR244D005/02s FBR244D006/02s FBR244D009/02s FBR244D012/02s FBR244D024/02s FBR244D048/02s Plastic sealed FBR244ND003/02s FBR244ND005/02s FBR244ND006/02s FBR244ND009/02s FBR244ND012/02s FBR244ND024/02s FBR244ND048/02s 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC Nominal voltage Nominal Coil current resistance (at nominal ±10% voltage) approx. 18 Ω 50 Ω 72 Ω 162 Ω 290 Ω 1,150 Ω 4,000 Ω 167 mA 100 mA 75% max. 10% min. Approx. Approx. Approx. of of 500 mW 280 mW 45 deg 83 mA nominal nominal (at nominal max. (at nominal voltage voltage voltage) voltage) 56 mA 41 mA 21 mA 12 mA 580 mW 53 deg Must operate voltage Must release voltage Nominal power Operate power Coil temperature rise Note: All values in the table are measured at 20°C. NO Plastic sealed FBR244NG005/02s FBR244NG006/02s FBR244NG009/02s FBR244NG012/02s FBR244NG024/02s FBR244NG048/02s 2. G TYPE MODEL s S, P, T, E Flux free FBR244G005/02s FBR244G006/02s FBR244G009/02s FBR244G012/02s FBR244G024/02s FBR244G048/02s DE Nominal voltage TF 36 Ω 66 Ω 140 Ω 6 VDC 9 VDC Nominal Coil current resistance (at nominal ±10% voltage) approx. 125 mA 4.5 VDC 12 VDC 24 VDC 48 VDC Note: All values in the table are measured at 20°C. SI 280 Ω 1,050 Ω 4,100 Ω Nominal voltage multiplying factor (%) s CHARACTERISTIC DATA Range of operation temperature and voltage [Standard 0.5 W type] 2.0 1.8 Nominal voltage multiplying factor (%) NE GN W S 91 mA 64 mA 4.0 VDC 0.27 VDC 6.0 VDC 0.38 VDC 11 mA 30.5 VDC 2.12 VDC 20 10 0A 1A Ma xim um allo OR Must operate voltage Must release voltage Nominal power Operate power Coil temperature rise 3.1 VDC 0.20 VDC Approx. Approx. Approx. 50 deg 550 mW 250 mW (at nominal 43 mA 8.1 VDC 0.55 VDC (at nominal max. voltage) voltage) 23 mA 15.8 VDC 1.06 VDC Max imu m coil allowa volt ble age 0A 1A 1.6 1.4 1.2 1.0 0.8 0.6 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C Range of operation temperature and voltage [G type 0.55 W type] 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 Must oper ate voltage Operating voltage range (Data) assumes that the maximum allowable temperatu of E type insulation coil is 115˚C Operate time Time (ms) 5 3 2 1 0.5 including bounce time wab le c Operating voltage range oil v olta ge Must oper ate volta ge not including bounce time 0 10 20 30 40 50 60 70 Operating temperature (˚C) 0 10 20 30 40 50 60 70 Operating temperature (˚C) 0.2 0.4 0.6 0.8 1.0 1.2 Coil power (W) 3 FBR244 SERIES Release time 20 10 Maximum switching capacity Service life (operations) ŒAC resistive load ( AC contact rating) DC resistive load ( DC contact rating) Life curve (x104 ) 500 100 50 10 5 1 0.5 1.0 1.5 2.0 28 V DC resistive load Contact load current (A) including bounce time 2.0 1.0 0.5 0.3 0.2 0.1  Œ Time (ms) 5 3 2 1 0.5 0.2 0.4 0.6 0.8 1.0 1.2 Coil power (W) not including bounce time Œ  120 V AC resistive load s REFERENCE DATA 60 50 Distribution of operate and release voltage Operate Release NO 10 20 30 50 100 150 220 Contact load voltage (V) Contact load current (A) Distribution (%) 40 30 20 10 0 Distribution (%) 60 40 20 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) DE 9.6+0.2 7.62 s DIMENSIONS qDimensions 20.0+0.2 10.0+0.3 16 13 11 9 7.62 5.08 3.5 * 7.62 5.08 5.08 (0.99) 5.08 (1.0) *:The terminals marked with an asterisk are kinked for temporary mounting on PC board. qTube carrier 12.8 max. 520 maximum 19.8 maximum 25 pieces/tube 7.62 NE SI GN W S 20 0 01 2 345 Time (ms) 6 7 8 qSchematic (BOTTOM VIEW) qPC board mounting hole layout (BOTTOM VIEW) 8–ø0.8 1 4 6 8 OR Distribution (%) TF 100 80 Distribution of operate and release time Operate Release Distribution of contact resistance 100 80 60 40 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) Unit: mm 4 FBR244 SERIES Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com NO DE TF SI NE GN W S OR 5