FCN-268Y032-A

Multi-IO microGiGaCN 4X IO connector module TM Revision 0.5 Part Number for Existing Product 2x2 Module: FCN-268Y032-A Straight socket (board side) : FCN-268F036-G/3DB RoHS Compliant Description Newly developed Multi-IO connector module, The Fujitsu Multi-IO microGiGaCN™ series product supports high speed signal transmission in compact package and easy to install structure. This series of modules incorporates Fujitsu’s world standard high-speed differential 4 channel IO socket interface which is defined by SFF 8470, InfiniBand™, 10G Base-CX4, and 10G Fiber Channel. The module is designed to meet InfiniBand DDR, along with the previously mentioned industry standards, in a 4channel, bi-directional data transfer mode. The Multi-IO connector module allows for increased I/O port density, while allowing for ease of signal routing on the main pcb. The Multi-IO microGiGaCN™ product makes it possible to install multiple modules within a small area with ease of installation with specially designed board to board high speed connector system. The original concept for the design is to accommodate 20 ports in a IU form factor. This series of module has capability to accommodate LED link status indicator and MDC (media detect circuitry, connector detect and power supply circuitry) for Fujitsu’s o-microGiGaCN™ four channel optical transceiver module, which extends transmission length up to 300 (2.5Gbps) over optic fiber. Future versions of module on development roadmap (1x4 scheduled) will allow users to select the most suitable ones for their applications. The die cast backshells provide firm and robust mechanical connection. Future applications will include 1x4, 1x2, and low profile 2x2 with and without AC blocking caps, LED’s, etc. Features • Full compatibility with following world industrial standards. InfiniBand™, InfiniBand ™ DDR, 10G Fiber Channel, 10G Base-CX4, SFF-8470, etc. • Four 4x links per module with 2x2 arrangement • Allows up to twenty 4x links in 1U form factor on single pcb • Well controlled signal integrity available for DDR signal rate (5Gbps) • Easy to install structure with high speed board to board interface connector • Options for Link status LED’s, power line for Fujitsu o-microGiGaCN™ four channel optical transceiver module (consult factory) • Robustness by die cast body • Ease of Signal Routing on motherboard • Good EMI characteristics with Gasket/Clip on the IO socket ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. a ry in lim re P Page 1 Multi-IO microGiGaCN Overview TM Revision 0.5 2 x 2 Module •By using the module with 4 I/O sockets, 20 I/O sockets (5 modules) max. in 1U. •IO connector mating face meets InfiniBand™, SFF-8470, 10G Base-CX4, 10G Fiber Channel, and etc. 36.0mm 38.0mm 14.7 in. (372.0mm) 16 in. (406.4mm) Mother board 19 in. (482.6mm) Gasket microGiGaTM Straight Mount Socket FCN-264D008-G/2D a ry in lim re P Panel lock clip Paddle card Backshell microGiGaTM Board-to-Board Right Angle Plug FCN-268M036-G/BD microGiGaTM Board-to-Board Straight Mount Socket FCN-268F036-G/3DB 28.9mm 8.9mm Motherboard Panel lock clip Panel ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 2 Multi-IO microGiGaCN Dimensions TM Revision 0.5 2 x 2 Module Module 36.0mm FCN-268Y032-A 37.9mm 73.4mm 22.0mm 1U (44.45mm) a ry in lim re P Note: B-to-B ST Socket not shown in the drawing 37.9 mm Screw head with 2.1mm max. (0.88mm max. optional) ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 3 Multi-IO microGiGaCN Mother Board Dimensions TM Revision 0.5 2 x 2 Module Front Panel microGiGaTM Mount Socket Board-to-Board Straight FCN-268F036-G/3DB a ry in lim re P ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 4 Multi-IO microGiGaCN TM Revision 0.5 Recommended Installment Procedure 2 x 2 Module To minimize stresses on the solder joints, following installation procedure is recommended. Step 1: Attaching the module onto PCB Insert the module Fixing module by screws Step 2: Attaching the module onto Panel Attaching Clips Fixing the module by screws a ry in lim re P Step 3: Attaching PCB to chassis Fixing PCB onto chassis by screws ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 5 Multi-IO microGiGaCN Rating Item (1) Current rating (2) Voltage rating (3) Environmental rating TM Revision 0.5 Rating Signal: 0.1A (AC) Ground: 0.5A (AC) 16VAC -20~+85℃ 80% RH max. Recommended P.W.B. (mother board) Applicable board thickness Characteristic impedance 1.6±0.2mm 100 ohms ±5% (in differential) Electrical performance Item Contact resistance Spec. Signal: 240m ohms max. Ground: 180m ohms max. Mechanical performance a. Insertion and withdrawal force 1. Board to board connector Item a ry in lim re P 2x2, 1x4 (1) Insertion force 74.0N max. 8.0N min. 5.0N min. (2) Withdrawal force (3) withdrawal force after test Item (1) Insertion force (2) Withdrawal force (3) withdrawal force after test Spec. 55.5N max. 2.5N min. 2.0N min. 1x2 37.0N max. 4.0N min. 2.7N min. 2. IO connector b. Durability 1. Board to board connector : 100 of insertion and withdrawal cycles 2. IO connector: 250 of insertion and withdrawal cycles ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 6 Multi-IO microGiGaCN TM Revision 0.5 Signal transmission characteristics When the connectors are mated in the condition shown in a figure below, characteristics shown in below should be satisfied. 100mm This specification is applied only to the cable assembly manufactured by Fujitsu Component Limited using recommended cables as in following table. No. of pair 8 AWG 24 Recommended cable SPECTRASTRIP SKEWCREA® 8 pair 24 AWG Part Number: 166-2499-998 SPECTRASTRIP SKEWCREA® 8 pair 26 AWG Part Number: 166-2699-997 8 a. Module characteristic 1. Module characteristic impedance . a ry in lim re P 26 Differential characteristic impedance in module area shall be 100 ohms ±10% with 100ps rise time. (measured pair should be terminated with 50 ohm terminator and measured with TDR) 2. Cross talk NEXT（Near end cross talk）shall be less than 4% with 100ps rise time when adjacent two-pair are driven. ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 7 Multi-IO microGiGaCN TM Revision 0.5 b. Cable assembly transmission characteristics 1. Cross talk (EIA-364-90) NEXT（Near end cross talk） shall be less than 4% with 100ps (20-80%) rise time when adjacent two-pair are driven. 2. Differential impedance of cable area (EIA-364-108, rise time:100ps 20-80%) Nominal value of cable area ：95 Ω～155 Ω It should be measured over the length of each signal pair, from the unequalized end (if equalizer is used). Deviation from nominal value of cable area: 5 ohm or less 3. Insertion loss (EIA-364-101) Mated cable assembly and connector, at frequencies up to 1.25GHz. Gauge Cable without equlizer 8m Cable with equlizer 10m 12.0ｄB or less 12m 15.0ｄB or less 24AWG 26AWG a ry in lim re P L≦8ｍ 8ｍ＜L 10.0ｄB or less 10.0ｄB or less L≦7ｍ 1.1ｄB/ｍ or less 7ｍ＜L 12.0.ｄB or less 10.0ｄB or less L≦6ｍ 1.2ｄB/ｍ or less 6ｍ＜L 1.4ｄB/ｍ or less 12.0.ｄB or less 10.0ｄB or less 14.0ｄB or less 17.5ｄB or less Not Available Not Available 28AWG ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 8 Multi-IO microGiGaCN TM Revision 0.5 4. Eye pattern (EIA 364-107, Input signal: Frequency 2.5Gbps, Differential amplitude: +/-0.5V, Width of bit: 400ps PRBS 1000 wave forms input) See below table. Cable without equilizer L≦5ｍ Jitter 24AWG Eye height 316 mV or more L≦5ｍ Jitter 26AWG Eye height 316 mV or more L≦4ｍ 0.25 UI or less 0.25 UI or less 5ｍ＜L Not Available Not Available 5ｍ＜L Not Available Not Available 4ｍ＜L 8m 0.25UI or less Cable with equilizer 10m 0.25UI or less 12m 0.25UI or less 316mV or more 8m 0.25UI or less 250mV or more 160mV or more 12m 0.25UI or less 10m 0.25UI or less 270mV or more 8m 250mV or more 190mV or more 12m Not Available Jitter 28AWG Eye height a ry in lim re P 0.25 UI or less Not Available 0.25UI or less 316 mV or more Not Available 250mV or more 10m Not Available Not Available Not Available 5. Pair to pair skew (EIA-364-103, Rise time: 100ps) 500 ps max. ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 9 Multi-IO microGiGaCN TM Revision 0.5 Revision Rev Rev Rev 0.3 0.4 0.5 Date Nov. 2, 2005 Nov. 11, 2005 Nov. 15, 2005 Initial Changes Voltage rate change Added 1x2, 2x2 low, 1x4 Front panel screw change a ry in lim re P ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Page 10