FCN-290H

0.5 mm PITCH MATCHED IMPEDANCE STACKING CONNECTORS FOR HIGH-SPEED SIGNAL REQUIREMENTS FCN-290H SERIES s FEATURES • Terminal pitch of 0.5mm, SMT terminals (for both plug and socket). • This connector can connect boards in parallel with 5.5 mm stacking height . • Bellows contacts provide reliable interconnection. • Characteristic impedance matching is 50Ω and low cross talk. s SPECIFICATIONS Item Operating temperature range Rated current Rated voltage Contact resistance Insulation resistance Dielectric withstand voltage Specifications -55° to +85 ° C 0.2A DC 24V AC 80mΩ max 500V DC, 100MΩ min. 150V AC, 1 min. s MATERIALS Item Insulator Conductor Plating Material LCP Copper alloy Surface finish of contact: PAGOS® Terminal: palladium 1. OUTER VIEW Signal Ground Signal Ground Ground Ground Signal Signal 2. HIGH FREQUENCY DATA a. Cross talk (%) 2.33ns Rise Time 2.33ns Near end Crosstalk % Far end 0.36 1.37 2.43 (150MHz) 0.32 1.16ns (300MHz) 1.47 0.58ns (600MHz) 2.56 b. Characteristic impedance (Ω) 2.33ns (150MHz) 1.16ns (300MHz) 0.58ns (600MHz) Characteristic impedance (Ω) 53.07~53.63 53.56~53.93 51.16~59.60 Specifications subject to change Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 1 290H Series (0.5mm supports high-speed signals, stacking) SOCKET, SMT s DIMENSIONS Signal terminal Ground terminal NO.99 0.6 (0.024) 0.2 (0.008) NO.1 2.95 (0.116) 7.08 (0.307) 8.68 (0.342) 4.25 (0.167) NO.100 3.5TYP(3.5 × n) 39.15 (1.541) (0.138TYP(0.138 × n)) 0.5TYP(0.5 × n) (0.019TYP(0.019 × n)) NO.2 0.15 (0.006) max (coplanarity) 3.5TYP(3.5 × n) (0.138TYP(0.138 × n)) 3.5TYP(3.5 × n) (0.138TYP(0.138 × n)) 0.5TYP(0.5 × n) (0.019TYP(0.019 × n)) Unit: mm (in.) s PC board mounting pattern 35.0 (1.378) 2.75(0.108) -0 5.08+0.5 (0.200+0.002 ) -0 0.25+0.5 (0.009+0.002 ) -0 -0 0.65+0.5 (0.026+0.002 ) -0 -0 10.28+0.5 -0 (0.405+0.002 ) -0 Ground pattern 0.75+0.3 (0.029+0.001 ) 3.5TYP(3.5 × n ) (0.138TYP(0.138 × n+0.001)) +0.03 3.5TYP(3.5 × n+0.03) (0.138TYP(0.138 × n+0.001)) 0.5TYP(0.5 × n+0.03) (0.019TYP(0.019 × n+0.001)) Unit: mm (in.) s ORDERING PART NUMBER FCN-298P100-L/0H Specifications subject to change Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 2 290H Series (0.5mm supports high-speed signals, stacking) PLUG, SMT s DIMENSIONS Ground terminal Signal terminal NO.1 0.6 (0.024) 0.2 (0.008) NO.99 4.2 (0.165) 0.15 max (coplanarity) 7.08 (0.307) NO.2 39.15 (1.541) 3.5TYP(3.5 × n) (0.138TYP(0.138 × n)) 0.5TYP(0.5 × n) (0.019TYP(0.019 × n)) NO.100 3.5TYP(3.5 × n) (0.138TYP(0.138 × n)) 3.5TYP(3.5 × n) (0.138TYP(0.138 × n)) 0.75+0.3 (0.029+0.001 ) 0.5TYP(0.5 × n) (0.019TYP(0.019 × n)) 8.68 (0.342) Unit: mm (in.) s PC BOARD MOUNTING PATTERN (MOUNTING SIDE) 35.0 (1.378) -0 5.08+0.5 (0.200+0.002 ) -0 2.75(0.108) 0.25+0.5 (0.009+0.002 ) -0 -0 0.65+0.5 (0.026+0.002 ) 10.28+0.5 -0 (0.405+0.002 ) -0 Ground pattern 0.75+0.3 (0.029+0.001 ) 3.5TYP(3.5 × n+0.03) (0.138TYP(0.138 × n+0.001)) 3.5TYP(3.5 × n+0.03) (0.138TYP(0.138 × n+0.001)) 0.5TYP(0.5 × n+0.03) (0.019TYP(0.019 × n+0.001)) Unit: mm (in.) s ORDERING PART NUMBER FCN-298J100-L/0H Specifications subject to change Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 3 290H Series (0.5mm supports high-speed signals, stacking) Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 4