FCN-364P040-AU

RECTANGULAR CONNECTORS FCN360 Series FCN-365J FCN-365P FCN-364P FCN-364P FCN-364J FCN-364J FCN-365J FCN-364P FCN-365P FCN-364J FCN-362J FCN-363J FCN-365P FCN-367J FCN-361P FCN-365P FCN-364P FCN-365J With type B cover FCN-364P FCN-365P With type E cover FCN-364J With type J1 cover Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 1 Terms in Selection Table (Example) 700 series Model Appearance Contact pitch Denotes a pitch between adjacent contacts or pitch between rows. 2.54 mm (0.100 in.) (pitch between adjacent contacts) x 2.54 mm (0.100 in.) (pitch between rows) Number of contacts Denotes the numbers of contacts of available connectors. 2.54 × 2.54 Contact pitch Number of contacts 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Wire-wrapping (post cross section) Pin type Structure Solder eyelet (tail shape) 0.64 Straight, throughhole (PC board hole dimensions) IDC (applicable AWG No.) φ 0.8, 2.54 × 2.54 P J P J φ 0.8, 2.54 × 2.54 #28, Flat cable #28, Flat cable Gold Silver Specification Tin Operating temperature range –55°C to +105°C Current rating DC 1 A Voltage rating AC 250 V Contact resistance 20 mΩ max. (DC 6 V, 0.1 A) Insulation resistance (DC 500 V) 1,000MΩ min. Dielectric withstanding voltage (for 1 minute) AC 500 V Insulation material cleaning with Chlorothene Polyester cleaning possible Part number (example) FCN-705P050-AU/M FCN-707J050-AU/B Remarks Plating Denotes the contact plating specification. Specifications Operating temperature range The connector can be used within the specified temperature range. Crimping (applicable AWG No.) Right-angle, throughhole (PC board hole dimensions) Plating P J Connection type Denotes the connection type of the cable or PC board connection section. EMI protection cover provided Current rating Maximum current that can flow through one connector pin Voltage rating Maximum voltage that can be applied to a connector Contact resistance Resistance observed at the contact part when 0.3 A (or 0.1 A) flows at 6 VDC with the connectors mated Insulation resistance Resistance to the leakage current flowing through the insulator (inside or surface of the insulator) when 500 VDC is applied across adjacent pins of a connector Dielectric withstanding voltage Applying the indicated voltage across adjacent pins of a connector for one minute does not cause any abnormality (damage or cracks in insulator). Insulating material, cleaning with chlorothene Denotes the insulating material used, and indicates whether the insulating material can be cleaned with chlorothene. Part number Some part numbers are indicated as examples. 4-2 Selection Table Rectanglar Connectors 360 series Model Appearance Contact pitch 2.54 × 2.54 Number of contacts 8, 16, 24, 32, 40, 48, 56, 64 P J Wire-wrapping (post cross section) Pin type Structure Solder eyelet (tail shape) Plating 1.8 × 0.7 1.8 × 0.7 4 Diagonal 0.71 mm (0.028 in.) Crimping ( applicable AWG No.) P J AWG #22 to #28 Straight, through hole (PC board hole dimensions) Right-angle, through hole (PC board hole dimensions) P J P J φ1, 2.54 × 2.54 φ1, 2.54 × 2.54 φ1, 2.54 × 2.54 φ1, 2.54 × 2.54 IDC ( applicable AWG No.) P J #28, Flat cable Gold Silver Specification Tin Operating temperature range –55°C to +85°C Current rating DC 3 A (IDC type: 1A) Voltage rating AC 250 V Contact resistance 15 mΩ max. (DC 6 V, 0.3 A) Insulation resistance (DC 500 V) 1,000 MΩ min. Dielectric withstanding voltage (for 1 minute) AC 500 V Insulating material Polyester PC (363J) Part number (example) Remarks FCN-361P024-AU Cable cover provided 4-3 FCN-360 Series NOTES Specifications subject to change Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 4 RECTANGULAR CONNECTORS FCN-360 SERIES ■ FEATURES • Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, PC board mounting, and insulation displacement connection (IDC). The user can choose a plug and jack combination that best meet each application. • Small size for high-density mounting The connectors are small with a contact and terminal pitch of 2.54 mm (0.100 in.) between pins and between rows and are thus well suited for high-density mounting. • Sturdy shell guide Sturdy shell guides are used to prevent mismating and to protect the pins. • Excellent cost performance Streamlined design and automated manufacturing, including use of partial solder plating, provide excellent cost performance. ■ SPECIFICATIONS ■ MATERIALS Specification Item Item Material Operating temperature range –55°C to +85°C Insulator Polyester (363J: PC94V-2) Current Rating DC 3 A (IDC type: 1 A) Conductor Copper alloy Voltage Rating AC 250 V Plating Gold plating, silver plating Contact resistance 15 mΩ max. (DC 6 V, 0.3 A) Insulation resistance 1000 MΩ min. (DC 500 V) Dielectric withstanding voltage AC 500 V for 1 minute Insertion force 2.5 kg max. (8 contacts), 20 kg max. (64 contacts) Withdrawal force 0.3 kg min. (8 contacts), 2.3 kg min. (64 contacts) Applicable wire Soldering φ0.60 mm (0.024 in.) max, AWG #23 or less Wire-wrapping φ0.32 mm (0.013 in.) to φ0.26 mm (0.010 in.), AWG #28 to #30 Crimping Standard contacts φ0.51 mm (0.020 in.) to φ0.32 mm (0.013 in.), AWG #24 to #28, insulator φ1.2 mm (0.047 in.) max. Contacts for thick wires φ0.64 mm (0.025 in.) to φ0.32 mm (0.013 in.), AWG #22 to #28, insulator φ1.7 (0.067 in.) max. IDC Flat cable 1.27 mm (0.050 in.) pitch, AWG #28 (stranded wire), AWG #30 (solid wire) Applicable PC board Specifications subject to change 1.6 mm (0.063 in.) standard thick Dimensions are in millimeters (inches) www.fujitsu.takamisawa.com 5 FCN-360 Series ■ PART NUMBER FCN-36 7 J 048-AU / H (Only for IDC) Shape of connector cover with IDC holders B: Close end (special) F: Close end H: Through end Plating and cover specification AU: Gold plating B: Type B cover (standard) C: Type C cover (for cable-to-cable connection) D: Type D cover (with metal cable clamp) E: Type E cover (with long lock-screws) F: Type F cover (64 contacts only) G1: One-touch lock type (40 contacts only) H/E: EMI protection type (40 contacts only) J1: Obtuse angle cable-out cover (40 contacts only) Number of contacts 8, 16, 24, 32, 40, 48, 56, 64 Connector or parts type A: Metal fitting C: Cover J: Jack P: Plug Tail type 0: Cover, metal fitting 1: Soldering 2: Wire-wrapping 3: Crimping 4: Straight 5: Right-angle 7: IDC 360 series connector Fujitsu connector Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 6 FCN-360 Series ■ APPLICATION EXAMPLE FCN-365J FCN-365P FCN-364P FCN-364P FCN-364J FCN-364J FCN-365J FCN-364P FCN-365P FCN-364J FCN-362J FCN-363J FCN-365P FCN-367J FCN-361P FCN-365P FCN-364P FCN-365J With type B cover FCN-364P FCN-365P With type E cover FCN-364J With type J1 cover FCN-365P FCN-365J With type G1 cover With type Ccover With type H/E cover Specifications subject to change Dimensions are in millimeters (inches) With type E cover http://us.fujitsu.com/connectors/ 7 FCN-360 Series 6 (0.236) 2.54 (0.10) 8.25 (0.324) SOLDERING TYPE (PLUG) ■ DIMENSIONS 2.54 (0.10) B 5 (0.196) 4 (0.157) A 5.8 (0.228) 12.1 (0.476) D 0.7 (0.027) B A 1.5 (0.059) 1 2 C φ2.8 (0.110) Unit: mm (in.) 8.6(0.338) ±0.2(0.007) ■ MOUTING HOLE LAYOUT [Panel] (C + 1)±0.3 ((C + 0.039)±0.011 ) B +0.15(0.005) φ2.8(0.110) –0 hole Unit: mm (in.) ±0.15 (0.005) ■ PART NUMBERS AND DIMENSIONS Dimensions: mm (in.) Number of contacts Part number A B C D 8 FCN-361P008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-361P016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-361P024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-361P032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-361P040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-361P048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-361P056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-361P064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 8 FCN-360 Series 2.54 (0.10) 6 (0.236) 8.25 (0.324) SOLDERING TYPE (JACK) ■ DIMENSIONS 2.54 (0.10) D A 5 (0.198) 4 (0.157) 6 (0.236) 5.8 (0.228) 10.8 (0.425) B 0.7 (0.027) 0.5 (0.019) 1.5 (0.059) A B 1 C φ2.8 (0.110) Unit: mm (in.) 8.6 (0.338) ±0.2(0.007) ■ BOARD MOUTING HOLE LAYOUT [Panel] (C + 1)±0.3 ((C + 0.039) ±0.011 ) B +0.15(0.005) φ2.8 (0.110) –0 hole Unit: mm (in.) ±0.15 (0.005) ■ PART NUMBERS AND DIMENSIONS Dimensions: mm (in.) Number of contacts Part number A B C D 8 FCN-361J008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-361J016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-361J024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-361J032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-361J040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-361J048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-361J056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-361J064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 9 FCN-360 Series 2.54 (0.10) 8.25 (0.324) WIRE-WRAP TYPE (PLUG) ■ DIMENSIONS 2.54 (0.10) D B 10.8 (0.425) 4 (0.157) 10.3 (0.405) A 0.71 (0.027) B A Diagonal length C φ2.8 (0.110) Unit: mm (in.) [Board] D B [Panel] (C + 1) ±0.3 ((C + 0.039)±0.011 ) +0.15(0.005) φ2.8 (0.110) –0 hole ±0.2 (0.007) ±0.15 (0.005) 8.6 (0.338) ±0.2(0.007) 2.54 (0.10) ±0.15(0.009) ■ MOUTING HOLE LAYOUT φ1 (0.039)+0.1(0.0034) hole B +0.15(0.005) φ2.8 (0.110) –0 hole ±0.15 (0.005) Unit: mm (in.) ■ PART NUMBERS AND DIMENSIONS Number of contacts Part number 8 Dimensions: mm (in.) A B C D FCN-362P008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-362P016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-362P024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-362P032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-362P040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-362P048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-362P056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-362P064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 10 FCN-360 Series 2.54 (0.10) 6 (0.236) 8.25 (0.324) WIRE-WRAP TYPE (JACK) ■ DIMENSIONS 2.54 (0.10) D A 13.5 (0.531) 5.8 (2.283) 6 (0.236) 4 (0.157) 10.8 (0.425) B 0.71 (0.027) Diagonal length 1 A B C φ2.8 (0.110) Unit: mm (in.) D ±0.2 (0.007) B ±0.15 (0.005) 8.6 (0.338) ±0.2(0.007) [Board] 2.54 (0.10) ±0.15(0.009) ■ MOUTING HOLE LAYOUT [Panel] (C + 1) ±0.3 ((C + 0.039) ±0.011 ) +0.15(0.005) φ2.8 (0.110) –0 hole φ1 (0.039) +0.1(0.0034) hole B φ2.8 (0.110) +0.15(0.005) hole –0 Unit: mm (in.) ±0.15 (0.005) ■ PART NUMBERS AND DIMENSIONS Number of contacts Part number 8 Dimensions: mm (in.) A B C D FCN-362J008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-362J016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-362J024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-362J032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-362J040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-362J048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-362J056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-362J064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 11 FCN-360 Series 2.54 (0.10) 6 (0.236) 8.25 (0.324) CRIMP TYPE (JACK HOUSING) ■ DIMENSIONS 2.54 (0.10) D 10.8 (0.425) B 5.8 (2.283) A 4 (0.157) 22 (0.866) 6 (0.236) C 6 (0.236) Pin 1 in row A φ2.8 (0.110) Pin 1 in row B Unit: mm (in.) 8.6 (0.338) ±0.2(0.007) ■ MOUTING HOLE LAYOUT [Panel] (C + 1)±0.3 ((C + 0.039)±0.011 ) B +0.15(0.005) φ2.8 (0.110) –0 hole Unit: mm (in.) ±0.15 (0.005) ■ PART NUMBERS AND DIMENSIONS Number of contacts 8 16 24 32 40 48 56 64 Part number FCN-363J008 FCN-363J016 FCN-363J024 FCN-363J032 FCN-363J040 FCN-363J048 FCN-363J056 FCN-363J064 Specifications subject to change A 28.84 (1.135) 39.0 (1.535) 49.16 (1.935) 59.32 (2.335) 69.48 (2.735) 79.64 (3.135) 89.8 (3.535) 99.96 (3.935) Dimensions: mm (in.) B C 23.34 (0.918) 17.84 (0.702) 33.5 (1.318) 28.0 (1.102) 43.66 (1.718) 38.16 (1.502) 53.82 (2.118) 48.32 (1.902) 63.98 (2.518) 58.48 (2.302) 74.14 (2.918) 68.64 (2.702) 84.3 (3.318) 78.8 (3.102) 94.46 (3.718) 88.96 (3.502) Dimensions are in millimeters (inches) D 7.62 (0.3) 17.78 (0.7) 27.94 (1.1) 38.1 (1.5) 48.26 (1.9) 58.42 (2.3) 68.58 (2.7) 78.74 (3.1) http://us.fujitsu.com/connectors/ 12 FCN-360 Series CRIMP TYPE (CONTACT) ■ DIMENSIONS Standard contact (applicable wire: AWG #24 to #28) Thick wire connection contact (applicable wire: AWG #22 to #26) 20.05 (0.789) 20.05 (0.789) Unit: mm (in.) ■ PART NUMBERS Type Plating Standard Thick wire connection contact Loose piece Gold plating FCN-363J-AU FCN-363J-AU/S Strip reeled Gold plating FCN-363J-AU/R FCN-363J-AU/T ■ PART NUMBERS OF CRIMPING TOOLS Part number FCN-363T-T005/H (Hand crimping tool) FCN-363T-T011/H (Hand crimping tool) Stripped length Applicable wire Wire cross-section area (mm2) FCN-363J-AU (Loose piece) AWG #24 0.20 to 0.24 1.25 mm (0.049 in.) to φ1.2 mm 1.30 mm (0.051 in.) (0.047 in.) max 3.0 mm (0.118 in.) to 4.0 mm (0.157 in.) FCN-363J-AU/R (Strip reeled) AWG #26 0.13 to 0.16 1.20 mm (0.047 in.) to φ1.2 mm 1.25 mm (0.049 in.) (0.047 in.) max 3.0 mm (0.118 in.) to 4.0 mm (0.157 in.) AWG #28 0.088 to 0.096 1.15 mm (0.045 in.) to φ1.2 mm 1.20 mm (0.047 in.) (0.047 in.) max 3.0 mm (0.118 in.) to 4.0 mm (0.157 in.) FCN-363J-AU/S (Loose piece) AWG #22 0.30 to 0.40 0.85 mm (0.033 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to 0.95 mm (0.037 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.) FCN-363J-AU/T (Strip reeled) AWG #24 0.20 to 0.24 0.75 mm (0.029 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to 0.85 mm (0.033 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.) AWG #26 0.13 to 0.16 0.73 mm (0.028 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to 0.81 mm (0.031 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.) Contact type Insulator diameter [Contact withdrawal tool] 10 (0.393) [Hand crimping tool] Crimp height 65 (2.559) FCN-360T-T001/H Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 13 FCN-360 Series 2.54 (0.10) 8.25 (0.324) STRAIGHT TYPE (PLUG) ■ DIMENSIONS 2.54 (0.10) D A 4.2 (0.165) 4 (0.157) 10.3 (0.405) B 0.71 (0.027) Diagonal length B A 1 φ2.8 (0.110) C Unit: mm (in.) 2.54 (0.10) ±0.15(0.009) ■ BOARD MOUTING HOLE LAYOUT [Board] ±0.2 (0.007) D B ±0.15 (0.005) +0.15(0.005) φ2.8 (0.110) –0 hole φ1 (0.039) +0.1(0.0034) hole Unit: mm (in.) ■ PART NUMBERS AND DIMENSIONS Number of contacts Part number 8 Dimensions: mm (in.) A B C D FCN-364P008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-364P016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-364P024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-364P032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-364P040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-364P048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-364P056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-364P064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 14 FCN-360 Series 2.54 (0.10) 6 (0.236) 8.25 (0.324) STRAIGHT TYPE (JACK) ■ DIMENSIONS 2.54 (0.10) D A 5.8 (0.228) 6 (0.236) 4 (0.157) 4.2 (0.165) 10.8 (0.425) B 0.71 (0.027) Diagonal length φ2.8 (0.110) A B 1 C Unit: mm (in.) 2.54 (0.10) ±0.15(0.009) ■ BOARD MOUTING HOLE LAYOUT [Board] D B ±0.2 (0.007) ±0.15 (0.005) φ2.8 (0.110) +0.15(0.005) hole –0 φ1 (0.039) +0.1(0.0034) hole Unit: mm (in.) ■ PART NUMBERS AND DIMENSIONS Number of contacts Part number 8 Dimensions: mm (in.) A B C D FCN-364J008-AU 28.84 (1.135) 23.34 (0.918) 17.84 (0.702) 7.62 (0.3) 16 FCN-364J016-AU 39.0 (1.535) 33.5 (1.318) 28.0 (1.102) 17.78 (0.7) 24 FCN-364J024-AU 49.16 (1.935) 43.66 (1.718) 38.16 (1.502) 27.94 (1.1) 32 FCN-364J032-AU 59.32 (2.335) 53.82 (2.118) 48.32 (1.902) 38.1 (1.5) 40 FCN-364J040-AU 69.48 (2.735) 63.98 (2.518) 58.48 (2.302) 48.26 (1.9) 48 FCN-364J048-AU 79.64 (3.135) 74.14 (2.918) 68.64 (2.702) 58.42 (2.3) 56 FCN-364J056-AU 89.8 (3.535) 84.3 (3.318) 78.8 (3.102) 68.58 (2.7) 64 FCN-364J064-AU 99.96 (3.935) 94.46 (3.718) 88.96 (3.502) 78.74 (3.1) Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 15 FCN-360 Series RIGHT-ANGLE TYPE (PLUG) • DIMENSIONS � N "' e e0 N nn--- ;JI; .,; N ---nn cc C, C, C, C, I � � e� C, C,/ 2.54 (0.10) C � ..... "' � ---+----- --3 (0.118) B �2.8 (0.110) I I. 0 , ---!-------0.71 (0.027) Unit: mm (in.) Diagonal length • NOTE • MOUTING HOLE LAYOUT [Board] § 0 - --1-----+fi-l--- - 2 - 'I==---+:::s;:=r� �+---i-��- --=l' ¢2.8 ( 0 11 0)jl15