FRB53ND09-Y

COMPACT POWER RELAY 1 POLE—20 A (For Automotive Applications) FBR53 SERIES n FEATURES l l Compact for high density packaging High contact capability (40A continuous) l High temperature grade (-40˚C to 125˚C) l Contact arrangement Form U (form A) n ORDERING INFORMATION [Example] FBR53 ND 02 - - *** Y (a) (b) (c) (d) (e) (a) (b) (c) (d) (e) Series Name Nominal Voltage Contact Material Custom designation FBR-53 : FBR-53 Series : Form U : 9 VDC : 0 VDC : 2 VDC : Silver Tin Oxide Alloy : Standard : High capacity 09 0 2 Y Nil -HW Contact Arrangement ND Note: The part number on the relay cover does not include 'FBR' Example: Ordering part number: FBR-53ND2-Y Stamped part number: 53ND2-Y  FBR53 SERIES n COIL DATA CHART Standard Model FBR53ND09-Y FBR53ND10-Y FBR53ND12-Y Nominal Voltage 9 VD C 10 VD C 12VD C Coil Resistance (±10% at 20˚C) 13 5 Ω 18 0 Ω 24 0 Ω Must Operate Voltage 5.4 VDC (at 20˚C) 6.8 VDC (at 85˚C) 6.3 VDC (at 20˚C) 7.9 VDC (at 85˚C) 7.3 VDC (at 20˚C) 9.2 VDC (at 85˚C) High capacity Model FBR53ND09-Y-HW FBR53ND10-Y-HW FBR53ND12-Y-HW Nominal Voltage 9 VD C 10 VD C 12VD C Coil Resistance (±10% at 20˚ C) 94 Ω 11 7 Ω 16 7Ω Must Operate Voltage 5.4 VDC (at 20˚C) 7.7 VDC (at 125˚C) 6.3 VDC (at 20˚C) 9.0 VDC (at 125˚C) 7.3 VDC (at 20˚C) 10.4 VDC (at 125˚C) 2 FBR53 SERIES n SPECIFICATIONS It em Arrangement Material Contact rating Contact Maximum Carrying Current Maximum Inrush Current Contact Resistance Coil Power Consumption (at rated coil voltage) Coil Operating Temperature Range Storage Temperature Range Operating Humidity Initial resistance Insulation Dielectric withstanding voltage between coil and contacts Time Life Operate (at nominal voltage) Release (at nominal voltage) Mechanical Electrical Misoperation Vibration resistance Endurance Misoperation Other Shock resistance Endurance Solderability Terminal Weight Strength Sp ec i f i c at i o n Standard Form U (Form A) Silver Tin Oxide DC 14V, 20A (resistive load) 20A continuous (10A each contact) at 25˚ C 60A inrush (30A each contact) at 25˚ C Approximately 0.6 W -40° C to +125° C (no frost) -40° C to +125° C (no frost) 45 to 85%RH 100MΩ maximum at 500VDC, (at 20˚ C, 65%RH) 500 VAC 50/60 Hz 1 minute, (at 20˚ C, 65%RH) 10 ms maximum 5 ms maximum 10x106 operations minimum (with no load for contact) 1x105 operations minimum (14VDC 20A resistive load) 10-55Hz,1.5mm dual amplitude, direction X, Y, Z 10 to 100Hz, 1.5mm dual amplitude, direction X, Y, Z. Not be damaged (mechanical and technical) after test. Coil energizing: 1 hr in each direction, Coil nonenergizing: 1 hr in each direction 100 m/s2 (11ms), direction X, Y, Z 1000 m/s2 (11ms), direction X, Y, Z, each 6 times Not be damaged (mechanical and technical) after test. Coil energizing: 3 times; Coil non-energizing: 3 times, total 36 times. at 270±10˚ C for 3±0.5sec. (terminals must be soldered) Pulling a terminal in its longitudinal direction for 10 sec. at 9.8N (1 Kgf) Approximately 6 grams 40A continuous (20A each contact) at 25˚ C 80A inrush (40A each contact) at 25˚ C Approximately 0.86 W -HW Average 1.5mΩ at 7A, 12 VDC *This is the standard value of the minimum load level. This value may differ depending on the switching frequency, environmental conditions and target reliability standard. We recommend to check this value by an actual load prior to use. 3 FBR53 SERIES n DIMENSIONS Standard • Dimensions 5.7+0 Terminal dimensions (±0.) COM terminal (2) .2 x t0.26 Coil terminal (2) .0 x t0.3 N.O. terminal (2) .2 x t0.4 2.3 +0 4.0+0 .25±0.20 3.5±0.3 0.6±0.2 2.5±0.2 5.0±0.2 7.0±0.2 0.0±0.2 • Schematic (bottom view) 2.5 • Mounting hole layout (bottom view) 0.6 (.25) 3 -0 solder 2-Ø.3 +0. -0 4-Ø.5 0.0 +0. -0 5.0 7.0 Unit: mm 4 FBR53 SERIES High Capacity • Dimensions 5.5±0.2 Com terminal 2.2 x t0.26 Coil terminal .0 x t0.3 N.O. terminal 2.2 x t0.4 +0.2 2.±0.2 3.7±0.3 0.4 3.5 +0.3 -0.3 0.6 2.5 +0.2 -0.2 +0.2 -0.2 .25 -0.2 4 6 0 +0.2 -0.2 +0.2 -0.2 +0.2 -0.2 (bottom view) • Schematic • PCB Mounting hole layout (bottom view) 2.5 0.6 (.25) 2 - Ø.3 -0 Tolerance: ±0.mm +0. 2 - 2.5 x 0.6 +0. -0 2 - 2.5 x 0.7 +0. -0 Unit: mm Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-3) 5449-700 Fax: (8-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (-408) 745-4900 Fax: (-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. May0/2006 5 6.0 0.0 4.0