FTR-B4CA1.5Z-B05

ULTRA MINIATURE RELAY SLIM SIGNAL RELAY FTR-B4 Series RoHS compliant n FEATURES Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum (SMT) Weight: Approximately 1.0 g l UL/CSA recognized l Conforms to Bellcore & FCC part 68, and Telcordia & FCC part 68 l Conforms to UL1950 / CSA 950, IEC 950 / EN60950 spacing and high breakdown voltage Clearance: 1.0mm Creepage: 1.6mm Basic insulation, 150V working voltage, pollution degree 2 l HIGH RELIABILITY Bifurcated contacts l Low power consumption 140 mV (standard), 100 mW (latching) l RoHS compliant since date code: 0430B8 Please see page 8 for more information l n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f ) (g) FTR-B4 C A 4.5 Z - 05 B (a) b) (c) (d) (e) (f ) (g) ( FTR-B4 Series C: Through hole type G: surface mount type S: surface mount type - reduced mounting area A: standard type B: latching type Nominal voltage Z: gold plated silver alloy B: standard enclosing direction 05: 500 (standard) Series Name Terminal type Operation function Coil Number Contact material Relay enclosing direction* Number of relays per reel* Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking Notes: * FTR-B4CA4.5Z → B4CA4.5Z - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B05 FTR-B4 Series n COIL DATA CHART Standard type MODEL FTR-B4( )A1.5Z FTR-B4( )A003Z FTR-B4( )A4.5Z FTR-B4( )A006Z FTR-B4( )A009Z FTR-B4( )A012Z FTR-B4( )A024Z Rated coil Coil resistance voltage (±10%) 1.5VD C 3VD C 4.5VD C 6 VD C 9 VD C 12VD C 24VD C 16. 1 Ω 64. 3 Ω 14 5 Ω 25 7 Ω 57 9 Ω 1,02 8 Ω 2,50 4 Ω Operating voltage +1.13V +2.25V +3.38V +4.5V +6.75V +9.0V +18.0V Release voltage* +0.15V +0.3V +0.45V +0.6V +0.9V +1.2V +2.4V Rated power consumption 140mW 140mW 140mW 140mW 140mW 140mW 230mW * Pulse driven Note: All values in the table are measured at 20˚C. Latching type (1 coil) MODEL FTR-B4 ( )B1.5Z FTR-B4 ( )B003Z FTR-B4 ( )B4.5Z FTR-B4 ( )B006Z FTR-B4 ( )B009Z FTR-B4 ( )B012Z FTR-B4 ( )B024Z Rated coil Coil resistance voltage (±10%) 1.5VD C 3VD C 4.5VD C 6 VD C 9 VD C 12VD C 24VD C 22. 5 Ω 90 Ω 20 3 Ω 36 0 Ω 81 0 Ω 1,44 0 Ω 4,80 0 Ω Set voltage +1.13V +2.25V +3.38V +4.5V +6.75V +9.0V +18.0V Release voltage -1.13V -2.25V -3.38V -4.5V -6.75V -9.0V -18.0V Rated power consumption 100mW 100mW 100mW 100mW 100mW 100mW 120mW * Pulse driven Note: All values in the table are measured at 20˚C. 2 FTR-B4 Series n SPECIFICATIONS Standard Type FTR-B4-CA ( ) Z FTR-B4-GA ( ) Z FTR-B4-SA ( ) Z Contact Arrangement Contact material Contact type Contact resistance (initial value) Contact rating Maximum carrying current Maximum switching power Maximum switching voltage Maximum switching current Maximum switching load* Capacitance 2Form C Gold overlay silver alloy Bifurcated contact (cross-bar) 100mΩ maximum at 6VDC 1 30 VDC 1A, 125 VAC 0.3 A (resistive) 1A 62.5 VA / 30W 250 VAC. 220 VDC 1A 10m VDC, 0.01mA* Approximately 0.7 pF (between open contacts) Approximately 0.7 pF (adjacent contacts) Approximately 1.0 pF (between coil and contacts) 140 mW up to 230 mW 80 mW up to 130 mW -40°C to +85°C 3ms maximum (set) 3ms maximum (reset) 100 mW up to 130 mW 57 mW up to 68 mW Latching Type FTR-B4-CB ( ) Z FTR-B4-GB ( ) Z FTR-B4-SB ( ) Z Coil Nominal power (at 20°C) Operate power (at 20°C) Operating temperature (no frost) Time value Insulation Operate (at nominal voltage, without bounce) 3ms maximum Release (at nominal voltage, without bounce) 3ms maximum Resistance Dielectric strength Surge strength between open contacts between adjacent contacts between coil and contacts between open contacts between adjacent contacts between coil and contacts Minimum 1,000MΩ 1,000 VAC 1 minute 1,000 VAC 1 minute 1,500 VAC 1 minute 1,500 V (at 10 x 160µs) [FCC Part 68] 1,500 V (at 10 x 160µs) [FCC Part 68] 1,500 V (at 10 x 160µs) [FCC Part 68] 2,500 V (at 2 x 10µs) [Bellcore] 50 x 106 operations (at 3 Hz) 100 x 103 ops. min. at 1A, 30 VDC (at 0.5 Hz) 100 x 103 ops. min. at 0.3A, 30 VDC (at 0.5 Hz) 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm Min. 750 m/s2 Min. 1,000 m/s2 Approximately 1.0 g Life Mechanical Electrical (resistive load) Vibration resistance Shock resistance Weight Misoperation Endurance Misoperation Endurance *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, envir onmental conditions and expected reliability levels. 3 FTR-B4 Series n CHARACTERISTIC DATA Operation (return time characteristics) Set, reset time characteristics 5 100 5 Distribution of Operate and Release Voltage FTR-B4GB4.5Z n=100 Operate Release 3 3 Distribution (%) 0.2 0.3 4 4 80 Time (ms) Time (ms) 60 2 2 Set time Reset time 40 Operation time 1 Release 0 0.1 0.2 0.3 1 20 0 0.1 0 10 20 30 40 50 60 70 80 Coil Power (W) Coil Power (W) Nominal Voltage Multiplying Factor (%) Nominal Voltage Multiplying Factor (%) Coil Temperature Rise (oC) 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 Standard type Contact carrying current: 0 Nominal Voltage Multiplying Factor Coil Temperature Rise 80 Ambient Temperature (maximum applied voltage, operating voltage characteristics) Ambient Temperature 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 olt ting V Opera ) oil (hot c age Co cu nta rre ct nt ca : 1 rry A ing (maximum applied voltage, operating voltage characteristics) Latching Type g in ry ar tc A ac 1 nt nt: Co rre cu 60 40 Contact carrying current: 1A 20 Contact carrying current: 0 0 0 0.1 0.2 0.3 Co cu nta rre ct nt: ca 1A rryi ng ti Opera il) o (hot c ltage ng vo ltage ting vo Opera ol coil) (co g Voltage Operatin ool coil) (c Coil Power (W) Maximum Switching Power 2 AC Resistive Ambient Temperature (oC) 40 60 80 100 40 60 80 100 Ambient Temperature (oC) 100 70 Life Curve Contact Current (A) Operation (x104) 1 50 40 30 20 12 30 0.5 DC Resistive 0.3 0.2 VD C Re sis t ive 5V DC Re 10 sis tiv e 0.1 1 2 5 10 20 30 50 100 200 0 0.2 0.4 0.6 0.8 1.0 1.2 Contact Voltage (V) Contact Current (A) 4 FTR-B4 Series n REFERENCE DATA 100 Distribution of Operate and Release Voltage FTR-B4GA4.5Z n=100 Operate Release 100 Distribution of Operate and Release Voltage FTR-B4GB4.5Z n=100 Operate Release 100 Distribution of Operate and Release Time FTR-B4GA4.5Z n=100 Operate Release Distribution (%) Distribution (%) 60 60 Distribution (%) 80 80 80 80 60 40 40 40 20 20 20 Nominal Voltage Multiplying Factor (%) 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 Nominal Voltage Multiplying Factor (%) Ambient Temperature Nominal Voltage Multiplying Factor (%) 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 (maximum applied voltage, operating voltage characteristics) Standard type Contact carrying current: 0 100 80 60 40 20 0 500 100 50 10 5 0 1 Time (ms) 2 3 4 5 Distribution of Bounce Time 100 FTR-B4GA4.5Z N=100 Operate Release Mechanical Life Test Contact Resistance (mΩ) Distribution (%) 80 Operating Voltage 60 40 Co cu nta rre ct nt: ca 1A rryi ng olt ting v Opera il) o (hot c age Release Voltage FBR-B4GA4.5Z n=8 1200 operations/min. Make Break 100 Initial 500 1000 2000 3000 5000 20 0 1 2 3 4 5 lta ting vo Opera oil) (cool c 40 60 ge Time (ms) Ambient Temperature (oC) 80 100 Operation (x104) Maximum Switching Power Nominal Voltage Multiplying Factor (%) Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%) 2 AC Resistive 100 80 60 40 20 Electrical Life Test Operating Voltage Release Voltage FTR-B4GA4.5Z n=8 30 operations/min. 30 VAC 1A (resistive load) Make Break Initial 10 20 10 0 Magnetic Interference FTR-B4GA4.5Z n=4 Operating Voltage Standard type Contact Current (A) 1 0.5 DC Resistive 0.3 0.2 -10 -20 20 10 0 Release Voltage When coil is ON When coil is OFF Contact Resistance (mΩ) 0 500 100 50 10 5 1 0.1 1 2 5 10 20 30 50 100 200 -10 -20 0 2 Contact Voltage (V) Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%) 20 10 0 Magnetic Interference FTR-B4GA4.5Z n=4 Operating Voltage Operation (x10 ) High Frequency Characteristics 4 150 FTR-B4GA4.5Z n=2 Distance between relays I (mm) High Frequency Characteristics 1.8 1.6 FTR-B4GA4.5Z n=2 4 6 8 10 Standard type Insertion Loss (dB) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Isolation (dB) When coil is ON When coil is OFF 100 -10 -20 20 10 0 50 -10 -20 0 2 Release Voltage 0 0 1 3 5 7 10 Distance between relays I (mm) 4 6 8 10 Frequency (MHz) 30 50 70 100 300 500 700 1000 1 3 5 7 10 Frequency (MHz) 30 50 70 100 300 500 700 1000 5 FTR-B4 Series n DIMENSIONS AND SCHEMATICS Through hole type Surface mount type (standard) 5.7±0.3 10.6±0.3 10.6±0.3 9±0.3 5.7±0.3 0.5±0.1 9±0.3 0.5 3.54±0.3 1.5±0.2 3.2±0.2 2.2±0.2 2.2±0.2 0.4±0.1 3.2±0.2 0.2±0.05 0.4±0.1 1.5±0.2 3.2±0.2 2.2±0.2 2.2±0.2 0.2±0.05 3.2±0.3 7.4±0.3 7.6 3.2 2.2 3.2 7.6 2.2 (-) 8 7 6 5 8-O 0.85 3.1 (-) 8 7 6 5 3.2 3.1 5.3 1 (+) 2 3 4 0.8 1 (+) 2 1.2 3 4 Recommended mounting pad (Tolerance: ±0.1mm) Terminal designations (Top view de-energized position) Recommended mounting pad (Tolerance: ±0.1mm) Terminal designations (Top view de-energized position) 9.7±0.3 6 FTR-B4 Series n DIMENSIONS AND SCHEMATICS Reduced mounting area 5.7±0.3 10.6±0.3 9±0.3 0.5 0.4±0.1 1.5±0.2 3.2±0.2 2.2±0.2 2.2±0.2 0.2±0.05 3.2±0.3 5.7±0.3 3.2 7.6 2.2 (-) 8 7 6 5 2.25 2.25 4.45 0.8 1 (+) 2 1.2 3 9.7±0.3 4 Recommended mounting pad (Tolerance: ±0.1mm) Terminal designations (Top view de-energized position) n RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) Temperature (C) T3 T2 T1 preheating soldering T 3 = 245C max. T 2 = 200C max. cooling T 1 = 165C max. Note: 1.Temperature profiles show the tempera ture of PC board surface. 2. Please perform soldering test with your actual PC board before mass produc tion, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mount ing and heating method. 0 120 sec maximum 30 sec Max. n PRECAUTIONS - For details on general precautions, refer to the section on technical descriptions. - Since this is a polar relay, follow the instructions of the internal wiring diagram for the +- connections of the coil. - Note that the terminal array and internal wiring of the surface mount relay are a top view. 7 FTR-B4 Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0CU-Ni will be used for the FTR-B3 and FTR-B4 series relays. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005. Reflow Solder condtion Peak Temp.: max. 250 C 250 Temperature ( C) 220 Pre-heating Cooling Soldering Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: 170 130 Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. 90~120 sec. max. 120 sec. 20~30 sec. (duration) We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. SnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found by our in-house test. 8 4. Tin Whisker l FTR-B4 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/relays/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 19, 2007 9