FTR-F3AA024EHA

POWER RELAY  POLE 5A sLIM TYPE RELAY FTR-F3-HA series n FEATuREs HIGH DENSITY MOUNTING Slim type with 7mm width and 142mm2 mounting space l HIGH ISOLATION Insulation Distance: Minimum 6mm between coil and contact (conforms to IEC 60065) Dielectric Strength: 4KV Surge Strength: 10KV l HIGH COIL SENSITIVITY Nominal coil power consumption of 200mW l CADMIUM FREE CONTACT FOR ECO-PROGRAM l SAFETY STANDARDS UL, CSA, VDE, SEMKO, CQC l Plastic sealed relay l RoHS compliant since date code: 0435R1, 0432R2, 0429R3, 0434R4, 0437L2 Please see page 6 for more information l RoHs compliant n ORDERING INFORMATION [Example] FTR-F3 A A 012 E –HA (a) b) (c) (d) (e) (f ) ( (a) (b) (c) (d) (e) (f) Series Nam e Contact Arrangemen t Coil Typ e Coil Nominal Voltag e Contact Materia l Contact Ratin g FTR-F 3 A : 1 Form A (SPST-NO ) A : Standard (200mW ) 005 : 5DC 006 : 6DC 009 : 9DC 012 : 12DC 018 : 18DC 024 : 24DC E : Silver nickel HA : 5A sealing confirmed Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code FTR-F3AA012E → Actual marking F3AA012E  FTR-F3-HA sERIEs n PART NuMBERs Ordering Part Number FTR-F3AA005E-HA FTR-F3AA006E-HA FTR-F3AA009E-HA FTR-F3AA012E-HA FTR-F3AA018E-HA FTR-F3AA024E-HA FTR-F3 1 form A Standard (200 mW) Series Contact Coil Power Coil Voltage 5 6 9 12 18 24 Silver nickel 5A Contact Material Contact Rating n COIL DATA CHART Coil Voltage 005 006 009 012 018 024 Nominal Voltage (VDC) 5 6 9 12 18 24 Max. Coil Voltage*1 12.0 VDC 14.4 VDC 21.6 VDC 28.8 VDC 43.2 VDC 57.6 VDC Coil Must Operate Resistance Voltage*2 ( ±10%) 125 Ω 180 Ω 405 Ω 720 Ω 1,620 Ω 2,880 Ω 3.75 VDC 4.5 VDC 6.75 VDC 9.0 VDC 13.5 VDC 18.0 VDC Must Release Voltage*2 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.8 VDC 2.2 VDC 200 mW Coil Power Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 2 FTR-F3-HA sERIEs n sPECIFICATIONs Item Contact Arrangement Material Configuration Resistance (initial) Rating Maximum Carry Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Load*1 Coil Rating Power Must Operate Power Operating Temperature Time Value Operate Time (without diode) Release Time (without diode) Life Other Mechanical Electrical Vibration Resistance Shock Resistance Weight Misoperation Endurance Misoperation Endurance FTR-F3 AA ( ) E-HA 1 form A (SPST-NO) Silver nickel Single Maximum 100 mΩ at 6 VDC, 1 A 5 A, 250 VAC / 30 VDC 5A 1,250 VA / 150 W 277 VAC / 30VDC 10 mA 5 VDC 200 mW 113 mW -40ºC to +70ºC (no frost) Maximum 10 ms Maximum 10 ms 5 x 106 operations minimum 100 x 103 operations minimum 10 to 55 Hz, at double amplitude of 1.5 mm 10-55Hz, at double amplitude of 1.5 mm Min. 100m/s2 (11±1ms) Approximately 4g Min. 1,000m/s2 (6±1ms) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INsuLATION Item Resistance (500 VDC) Dielectric Strength open contacts coil and contacts FTR-F3 Minimum 1,000 MΩ 750 VAC (50/60 Hz) 1 min. 4,000 VAC (50/60 Hz) 1 min. 10,000 V (1.2 x 50µs standard wave) 6 mm / 6 mm 250 V 2 IIa Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE01106) C / 250 V 3 FTR-F3-HA sERIEs n sAFETY sTANDARDs Type UL Compliance UL 508 E63614 CSA VDE SEMKO C22.2 No. 14 LR 40304 0435 EN 61058-1: 1992 +A1:1993 EN 61095:1993+A11 Contact rating Flammability: UL 94-V0 (plastics) 5A, 30 VDC/ 277 VAC (resistive) 1/10 HP, 250VAC /125VAC 1/8 HP, 277VAC Pilot duty: D300, 120 VAC / 240 VAC 5A, 250 VAC / 30 VDC 85ºC 4A, 250 VAC break 1A cosØ=0.8, 85C 5A, 250 VAC 40T70 n CHARACTERIsTIC DATA Nominal Voltage Mult. Factor 100 90 80 70 60 50 40 30 20 10 0 Coil temperature rise 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 Operating Range 3A 5A 0A 10 5 Maximum Switching Power AC Resistive FTR-F3 FTR-F3 Temperature rise (°C) Contact Current (A) 3 5A carrying current on contact 3A carrying current on contact 2 1 0.5 0.2 10 20 50 100 200 500 Non carrying current on contact Opera ltag ting vo Opera tin ge (ho g volta t coil) DC Resistive e (coo l coil) 0 0.1 0.2 0.3 0.4 Coil power (W) 0.5 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature (ºC) Contact Voltage (V) 100 Life Curve FTR-F3-HA Distribution of operate and release voltage 100 80 Operate Release FTR-F3AA012E-HA n=100 100 80 Distribution (%) Distribution of contact resistance FTR-F3AA012E n=100 Service life (x104 operations) 50 AC125 V Distribution (%) AC250V/DC30V AC125V cosφ=0.4 Make 20 10 5 60 40 20 0 20 40 60 80 100 60 40 20 0 4 8 12 16 20 AC250V cosφ=0.4 DC30V τ=7ms DC30V τ=15ms 2 1 Nominal voltage multiplying factor (%) 4 5 6 0 Contact load current (A) 1 2 3 Contact resistance (mΩ) 4 FTR-F3-HA sERIEs n DIMENsIONs l Dimensions l Schematics (BOTTOM VIEW) 7.0+0.2 (.275+.012) l PC board mounting hole layout (BOTTOM VIEW) 4-ø1.1(.043) 20.3 +0.2(.799+.008) 1 15.0 +0.3(.590+.012) 2 COM NO 4.7(.185) 0.5(.020) 1.32(.052) 0.35(.014) 1.32(.052) f0.45(.017) f0.45(.017) 2.7 (.106) 8.8(.346) 7.0(.276) 3.3 (.138) 4 3 2.7 (.106) 8.8(.346) 7(.276) 0.35(.014) 0.8(.031) 4.7 (.185) 1.25(.049) 1.25(.049) 5 FTR-F3-HA sERIEs RoHs Compliance and Lead Free Relay Information . General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 FTR-F3-HA sERIEs Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and south America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 7, 2008. 7