FTR-F3AA048EHA

POWER RELAY  POLE 3A sLIM TYPE RELAY FTR-F3 series n FEATuREs HIGH DENSITY MOUNTING Slim type with 7mm width but capable of 250 VAC/30 DC, 5A l HIGH ISOLATION Insulation Distance: Minimum 6mm between coil and contact (conforms to IEC 65) Dielectric Strength: 4KV Surge Strength: 10KV l HIGH COIL SENSITIVITY Nominal coil power consumption of 200mW l HIGH FLAMMABILITY RESISTANCE Flammability grade of 94V-0, UL Class B (130˚C) l CADMIUM FREE CONTACT FOR ECO-PROGRAM l SAFETY STANDARDS UL, CSA, VDE approved, SEMKO pending l Plastic sealed relay l RoHS compliant since date code: 0435R1, 0432R2, 0429R3, 0434R4, 0437L2 Please see page 5 for more information l RoHs compliant n ORDERING INFORMATION [Example] (a ) (b ) (c) (d ) (e ) (f) FTR-F3 A A 012 E –HA (a) b) (c) (d) (e) (f ) ( FTR-F 3 A : 1 Form A (SPST-NO ) A : Standard (200mW ) 005 : 5DC 006 : 6DC 009 : 9DC E : Silver allo y Nil : 3A HA : 5A KS : sealing confirmed (3A) 012 : 12DC 024 : 24DC 048 : 48DC Series Nam e Contact Arrangemen t Coil Typ e Coil Nominal Voltag e Contact Materia l Contact Ratin g Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code FTR-F3AA012E → Actual marking F3AA012E  FTR-F3 sERIEs n sAFETY sTANDARD AND FILE NuMBERs UL508 (File No. E63614); C22.2 No. 14 (File No. LR40304), VDE 0435 (File No. 11039-4940-0021) Please note that UL/CSA ratings may differ from the standard ratings. Please request when the approval markings are required on the cover and/or relay recognized by SEV is required.. Type FTR-F3 FTR-F3-HA Nominal Voltag e 5 to 24 VD C 5 to 24 VD C Contact Ratin g 1/8 HP 277 VAC 1/10 HP 125V 3A 30 VDC/277 VAC res., Pilot duty D300 1/10 HP 125 VAC 1/8 HP 277VAC 5A 30VDC / 277 VAC resistive, Pilot duty D300 n sPEcIFIcATIONs It em Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Rating Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load* Coil Nominal Power (at 20° C) Operate Power (at 20° C) Operating Temperature Time Value Operate Tim e (at nominal voltage ) Release Time (at nominal voltage ) Insulation Resistance (at 500VDC) Dielectric Strength Surge Strength Life Vibration Mechanica l Electrical Misoperatio n Endurance Shock Weight *1 between open contacts between coil and contacts 1 5A FTR-F3 ( ) -HA Silver Alloy 1 Form A (SPST-NO) 3A FTR-F3 ( ) Maximum 100 m ohm (at 1A 6VDC) 250 VAC/30 VDC, 5 A 1250 VA/150 W 250 VAC/30 VDC, 3 A 5A 750 VA/90 W 277VAC / 30VDC 5A 10mA, 5VDC 0.2 W 0.11 W -40° C to +70° C (no frost) Maximum 10m s Maximum 10m s Minimum 1,000 M ohm 750 VAC 1 minute 4,000 VAC 1 minute 10,000V / 1.2 x 5 0 m Between Coil and Contacts s 5 x 106 operations minimum 100 x 1 03 ops. min. 200 x 103 ops. min. 10-55 Hz (double amplitude of 1.5mm) 10-55 Hz (double amplitude of 1.5mm) 100m/s2 (11±1ms) 1,000m/ s2 (6±1ms) Approximately 4g Misoperation Endurance Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-F3 sERIEs n cOIL DATA cHART MODEL FTR-F3AA005E-( ) FTR-F3AA006E-( ) FTR-F3AA009E-( ) FTR-F3AA012E-( ) FTR-F3AA018E-( ) FTR-F3AA024E-( ) No m i n al Vo l t a g e 5VDC 6VDC 9VDC 12VDC 18VDC 24VDC Co i l R es i s t an c e 12 5 Ω 18 0 Ω 40 5 Ω 720 Ω 1,620 Ω 2,880 Ω Op er at e Vo l t ag e 3.75VDC 4.5VDC 6.75VDC 9.0VDC 13.5VDC 18.0VDC Rel eas e Vo l t ag e No m i n al Po w er 0.5VDC 0.6VDC 0.9VDC 1.2VDC 1.8VDC 2.4VDC 200mW 200mW 200mW 200mW 200mW 200mW Note: All values in the table are measured at 20°C. n cHARAcTERIsTIc DATA Timing 20 16 100 90 80 70 60 50 40 30 20 10 0 Coil temperature rise Nominal voltage muitiplying factor 2.5 2.0 1.5 Operating range Maximum permissable voltage Time (ms) 12 8 4 0 Operate Release 0.1 0.2 0.3 0.4 0.5 Temperature rise (°C) 5A carrying current on contact 3A carrying current on contact Operate voltage of hot coil 1.0 0.5 Operate voltage of cool coil Non carrying current on contact 0 0.1 Coil power (W) 10 5 0.2 0.3 0.4 Coil power (W) 0.5 0 20 40 60 80 100 Ambient temperature (°C) Maximum Switching Power AC Resistive 200 Life Curve AC250V DC30 V AC125 V AC125V COS ø=0.4 Service life (x10 operations) FTR-F3 Contact Current (A) 100 2 1 0.5 0.2 10 20 50 100 200 500 4 50 DC30 V t=7ms 20 10 AC250V COS ø=0.4 5 DC30 V t=15ms 0 1 2 3 4 5 DC Resistive Contact Voltage (V) Contact load current (A) 3 FTR-F3 sERIEs n REFERENcE DATA Distribution of operate and release voltage 100 80 Operate Release FTR-F3AA012E n=100 Distribution of operate and release time 100 80 60 40 20 FTR-F3AA012E n=100 100 80 Distribution (%) Distribution of contact resistance FTR-F3AA012E n=100 Make Distribution (%) Distribution (%) 60 40 20 0 20 40 60 80 100 Operate Release 60 40 20 0 4 8 12 16 20 Nominal voltage multiplying factor (%) 0 2 4 6 Time (ms) 8 10 Contact resistance (m Ω ) 10 8 6 4 2 0 20 10 7 5 3 2 1 0.7 0.5 Mechanical life test Operate Release FTR-F3AA012E n=20 1200 operations/minute Initial 0.1 0.2 0.5 1 2 Operation (x106) 5 10 8 6 4 2 0 100 50 20 10 5 2 1 0.5 Electrical life test Operate Release FTR-F3AA012E n=8 10 operations/minute AC250 V, 3A (resistive) Initial 100 200 10 8 6 4 2 0 100 50 20 10 5 2 1 0.5 Electrical life test Operate Voltage (V) Voltage (V) Voltage (V) Release FTR-F3A012E n=8 10 operations/minute DC30V, 3 A (resistive) Contact resistance (m) Contact resistance (m) Contact resistance (m) Initial Operation (x103) 100 Operation (x103) 200 n DIMENsIONs l Dimensions l Schematics (BOTTOM VIEW) l Pc board mounting hole layout (BOTTOM VIEW) 4-ø1.1(.043) 4-ø1.1(.043) 20.3 +0.2(.799+.008) 7.0+0.2 (.275+.012) 15.0 +0.3(.590+.012) 4.7(.185) 0.5(.020) 1.32(.052) 2.7 (.106) 8.8(.346) 7(.276) 1.32(.052) 3.3 (.138) 2.7 (.106) 8.8(.346) 7(.276) 0.35(.014) 1.32(.052) f0.45(.017) f0.45(.017) 2.7 (.106) 8.8(.346) 7.0(.276) 0.35(.014) .8(.031) 4.7 (.185) 1.25(.049) Creepage distance 6mm Clearance distance 6mm 1.25(.049) 1.25(.049) 4.7(.185) 4 FTR-F3 sERIEs RoHs compliance and Lead Free Relay Information . General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 5 FTR-F3 sERIEs Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and south America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 11/18/2005. 6