POWER RELAY
1 POLE—10 A (CADMIuM FREE CONTACTS TYPE)
FTR-H2 SERIES
RoHS compliant RoHS compliant
n FEATuRES
HIGH DENSITY MOUNTING Saves space by 26% compared to FTR-H type. l HIGH ISOLATION Insulation Distance: Minimum 6mm between coil and contact Dielectric Strength: 4KV Surge Strength: 0KV l TV-5 rating l HEAT RESISTANCE, FLAMMABILITY Class B (130° C) insulation, flammability 94V-0 l CADMIUM FREE CONTACT FOR ECO-PROGRAM l SAFETY STANDARDS UL, CSA, VDE approved, SEMKO (pending) UL/CSA TV-5 rating approved l RoHS compliant since date code: 0437L2 Please see page 8 for more information
l
n ORDERING INFORMATION
[Example] (a) (b) (c)
FTR-H2 A K 02 T (a) b) (c) (d) (e) ( FTR-H2: FTR-H2 series (0A) A: Form A (SPST-NO) K: Standard (530mW) L: High sensitivity (250mW) A: Sealed (530mW) 005 : 5DC 02 : 2DC 048 : 48DC 006 : 6DC 08 : 8DC 009 : 9DC 024 : 24DC T: Silver-tin oxide (TV-5)
Series name Contact arrangement Coil type
(d)
Coil nominal voltage
(e)
Contact material
FTR-H2 Series
n PART NuMBERS
Ordering Part Number FTR-H2AK005T FTR-H2AK006T FTR-H2AK009T FTR-H2AK02T FTR-H2AK08T FTR-H2AK024T FTR-H2AK048T FTR-H2AL005T FTR-H2AL006T FTR-H2AL009T FTR-H2AL02T FTR-H2AL024T FTR-H2AA005T FTR-H2AA006T FTR-H2AA009T FTR-H2AA02T FTR-H2AA08T FTR-H2AA024T FTR-H2AA048T A: 530mW (sealed) FTR-H2 form A L: 250mW (High sensitivity) K: 530mW (standard)
Standard: 530 mW, High sensitive (250 mW), Sealed (530 mW) Series Contact Coil Power Coil Voltage 5 6 9 2 8 24 48 5 6 9 2 24 5 6 9 2 8 24 48 Silver tin oxide (TV-5 rated) Contact Material
n COIL DATA CHART
Coil Voltage 005 006 009 02 08 024 048
Standard Type (530mW) Nominal Voltage (VDC) 5 6 9 2 8 24 48 Max. Coil Voltage* 8.5 VDC 0.2 VDC 5.3 VDC 20.4 VDC 30.6 VDC 40.8 VDC 8.6 VDC Coil Resistance Must Operate ( ±0%) Voltage*2 47 Ω 68 Ω 155 Ω 270 Ω 610 Ω 1,110Ω 4,400 Ω 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 2.6 VDC 6.8 VDC 33.6 VDC Must Release Voltage*2 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC .2 VDC 2.4 VDC
2
FTR-H2 Series
Sensitive Type (250mW)
Coil Voltage 005 006 009 02 024 Nominal Voltage (VDC) 5 6 9 2 24 Max. Coil Voltage* 2.5 VDC 5.0 VDC 22.5 VDC 30.0 VDC 60.0 VDC Coil Resistance Must Operate Must Release ( ±0%) Voltage*2 Voltage*2 100 Ω 145 Ω 325 Ω 575 Ω 2,310 Ω 4.0 VDC 4.8 VDC 7.2 VDC 9.6 VDC 19.2 VDC 0.25 VDC 0.30 VDC 0.45 VDC 0.60 VDC .20 VDC
Note: All values in the table are measured at 20°C. *: No contact current at 20°C *2: Specified values are subject to pulse wave voltage
n SPECIFICATIONS
Item Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load* Coil Nominal Power (20°C) Operate Power (20°C) Operating Temperature Time Value Operate Time (at nominal voltage) Release Time (at nominal voltage) Life Mechanical Electrical AC Contact rating DC Contact Rating Lamp load (TV-5) Other Vibration Resistance Shock Resistance Weight
*
Standard H2 AK ( ) T form A (SPST-NO) Silver tin oxide
Sensitive H2 AL ( ) T
Sealed H2 AA ( ) T
Maximum 100 mΩ (at 6VDC, 1A) 250 VAC / 30 VDC / 0A 0A 2500VA / 300W 400VAC / 300VDC 00 mA, 5 VDC 530 mW 260 mW Maximum 5 ms Maximum 5 ms 2 x 06 operations minimum 00 x 03 operations min. 00 x 03 operations minimum 25 x 03 operations minimum 0 to 55 Hz, at double amplitude of .5 mm 200m/s2 (±ms) 0 to 55Hz, at double amplitude of .5 mm ,000m/s2 (±ms) 50 x 03 operations min. 5 x 03 operations minimum 250 mW 60 mW 530 mW 260 mW
-40ºC to +70ºC (no frost)
Misoperation Endurance Misoperation Endurance
Approximately 2g
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
3
FTR-H2 Series
n INSuLATION
Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-H2 Minimum 1,000 MΩ 1 min. ,000 VAC (50/60 Hz) min. 4,000 VAC (50/60 Hz) min. 0,000 V 6 mm / 6 mm 250 V 2 III a B / 250 V .2 x 50µs standard wave Note at 500 VDC
Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN680- VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE 00b)
n SAFETY STANDARDS
Type UL Compliance UL 508 E6364 CSA C22.2 No. 4 LR 40304 0435, 0860 Contact rating Flammability: UL 94-V0 (plastics) 5A, 250VAC (resistive) 5A, 25VAC (resistive) /6 HP, 25VAC /2 HP, 250VAC TV-5, 20 VAC Pilot duty: C300 0A, 250 VAC (cosØ=) 3A, 250 VAC cosØ=0.4) 0A, 30 VDC (0ms) 250 VAC, 0 (3) or 5/80 40T70
VDE
SEMKO
EN 61058-1: 1992 AND A1 EN 61095:1993 and A1+A11
Complies with CQC, NEMKO, DEMKO, FIMKO,
4
FTR-H2 Series
n CHARACTERISTIC DATA
Coil temperature rise
FTR-H2 80 00
Nominal voltage mult. factor
2.2 2.0 .8 .6 .4 .2 .0 0.8 0.6 0
Operating range Contact current (A)
FTR-H2
0A
00 50 20 0 5 2 0.5 0.2 80 00
Maximum switching power
FTR-H2
Temperature rise (deg.)
60
0A
AC resistive
0A
40
0A
Operate voltage of hot coil
DC resistive
20
Operate voltage of cool coil
0
0
0.2
0.4
0.6
0.8
.2
20
40
60
Coil power (W) Service life (x04 operations)
00 50
AC250V/DC30V AC250V Cosφ=0.7 DC30V τ=7ms
Ambient temperature (°C)
0
20
50
00
200
500 000
Contact Voltage (V)
Life curve
FTR-H2
20 0 5
AC250V Cosφ=0.4 DC30V τ=15mS
2
0
2
4
6
8
0
2
4
Contact current load (A)
n REFERENCE DATA
00 90
Distribution of operate & release voltage
FTR-H2AA02T N=00 operate release
Distribution of contact resistance
00 FTR-H2AK02T N=00 make
Distribution (%)
70 60 50 40 30 20 0 0
Distribution (%)
80
80
60
40
20
0 0 0 20 30 40 50 60 70 80
0
Nominal voltage mult. factor (%)
Contact resistance (mΩ)
2
4
6
8
0
2
4
5
FTR-H2 Series
n DIMENSIONS
l Dimensions
24.0 +0.3(.945+.012) 11.0+0.3(.433+.012)
l Schematics (BOTTOM VIEW)
l PC board mounting hole layout (BOTTOM VIEW)
1.75(.069) 3.5(.138) 7.5(.295) 1.8(.071) 16.5(.650)
1
25.0 +0.3(.984+.012)
2
2-Ø 0.9(.035)
2-Ø1.3(.051)
0.5(.020)
4
3.3 (.138)
3
Orientation Mark De-energized condition
1.75(.069) 7.5(.295) 1.0(.039)
f0.5(.020) 1.8(.071)
0.35(.014) 16.5 (.650
0.4(.016) 3.5(.138)
Unit: mm (in.)
6
FTR-H2 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition Flow Solder condition:
Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath
Solder by Soldering Iron:
Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test.
4. Tin Whisker
l
7
FTR-H2 Series
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 9, 2008.
8