FTR-JRJB018W

FTR-JR SERIES POWER RELAY 1 POLE 16 A—SLIM POWER RELAY FTR-JR Series RoHS compliant n FEATuRES compared to VR Series) l Cadmium free contacts l Insulation distance: 9.5mm, Dielectric strength: 5K VAC Surge voltage 0K VAC l JB: Tab terminal and contact terminal are connected electrically JC: Tab terminal and contact terminal are not connected electrically l UL Class B (130 ˚C), Flamability 94V-0 l SAFETY STANDARDS UL, CSA, VDE l RoHS compliant since date code: 0434R Please see page 5 for more information l  Pole 6A slim relay with #87 Tab terminal l Nominal Power: 530 mW (35% power reduction To be n APPLICATIONS [Example] (a ) (b ) (c) (d ) (e ) (f) Di l Mircrowave oven magnetron, and heater sc n ORDERING INFORMATION FTR-JR J B 02 W – ** (a) b) (c) (d) (e) (f ) ( FTR-JR Series on Series Name Contact Arrangement Coil Type Coil Nominal Voltage Contact Material Custom Designation J : Tab terminal (#187) Ti B : 530 mW (TAB and PCB terminals connected) C : 530mW (TAB and PCB terminals unconnected) 012 : 12 VDC 018 : 18 VDC 024 : 24 VDC W : Silver alloy Special Number nu eD  Note: The designation name is stamped on the top of the relay case as follows: (Example: Designation ordered: FTR-JRJB02W Stamp: JRJB02W FTR-JR SERIES n COIL DATA CHART MODEL No m i n al V o l t ag e FTR-J R Ser i es FTR-JRJ( ) 012W FTR-JRJ( )018W FTR-JRJ( )024W 12 VD C 18 VD C 24 VD C Co i l es i s t an c e R (± 10%) 27 0 W 61 0 W 1,10 0 W Mu s t Op er at e Mu s t Rel eas e V o l t ag e V o l t ag e 9.0 VDC 13.5 VDC 18.0 VDC 0.6 VD C 0.9 VD C 1.2 VD C No m i n al Po w er 530 m W 530 m W 530 m W Note: All values in the table are measured at 20°C. n SPECIFICATIONS It em Contact Arrangement Material FTR-J R Ser i es 1 Form A (SPST-NO) Silver alloy Maximum 100 m ohm (at 1A 6VDC) 277VAC 16 A 20A 4,432VA 400 VAC 20A 5 VDC, 10 mA 530mW 300mW To Coil Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Rating Maximum Switching Voltage Maximum Switching Current Maximum Switching Load *1 be Nominal Power (at 20˚ C) Operate Power (at 20˚ C) Operating Temperature Di sc -40° C to +85° C (no frost ) Time Value Operate Time (at nominal voltage) Release Time (at nominal voltage) Life Other Mechanical Electrical Contact Ratin g Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight Maximum 15 ms (excluding bounce time) Maximum 10 ms (excluding bounce time) 2 x 10 operations minimum 7 on Ti 10 x 1 04 operations minimum nu 10-55 Hz (double amplitude of 1.65mm) 10-55 Hz (double amplitude of 2.0mm ) 200m/s2 (11±1ms) 1,000m/ s2 (6±1ms) Approximately 20 g eD 2 * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-JR SERIES n INSuLATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-JR Minimum 1,000 MΩ ,000 VAC (50/60 Hz)  min. 5,000 VAC (50/60 Hz)  min. 0,000 V .2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) n SAFETY STANDARDS Type UL CSA VDE To Compliance Contact rating Flammability: UL 94-V0 (plastics) 20A, 25VAC (resistive) 6A, 277VAC (resistive) UL 508 E36314 C22.2 No. 14 LR40304 0435, 0631, 0700, 0860 Complies with CQC be Di sc on Ti nu eD 3 FTR-JR SERIES n CHARACTERISTIC DATA Timing 20 100 Coil Temperature Rise 2.2 Nominal Voltage Multiplying Factor Operating Range 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 p Must O erate e Voltag (Hot C oil) 20A 16 Temperature rise (deg.) Timing (ms) 80 16A 60 Operate 0A 12 16A 8 40 4 0 0.2 20 10 To Release 0.4 10 20 50 20 0A 0 0.2 0.4 0.6 0.8 Coil Power (W) 1.0 1.2 0.6 0.8 Coil Power (W) 1.0 1.2 0 Must O perate Voltage (Cool C oil) 0 Maximum Switching Power AC Resistive 5 Contact Current (A) 2 1 0.5 0.2 0.1 be 200 500 20 40 60 80 Ambient Temperature (Co) 100 Di 100 1000 sc n REFERENCE DATA Contact Voltage (V) on Ti Distribution of Operate and Release Voltage 100 90 80 70 FTR-JRJB024W n=100 Operate Release 100 90 80 70 Distribution of Operate and Release Time FTR-JRJB024W n=100 Operate Release nu 100 90 80 70 60 50 40 30 20 10 Distribution of Contact Resistance FTR-JRJB024W n=100 eD Ω 8 10 Distribution (%) Distribution (%) 60 50 40 30 20 10 60 50 40 30 20 10 20 0 0 16 _ _ 10 Mechanical Life Test 20 30 40 50 60 70 80 _ 90 100 0 Distribution (%) 0 1 2 3 4 5 6 7 8 9 10 11 12 0 0 2 4 Nominal Voltage Multiplying Factor (%) Operate _ Voltage (V) 12 8 4 0 20 10 5 2 1 x _ x _ x x _ _ _ _ x _ _ _ _ Ω Voltge (V) Ω x _ x _ x Ω Voltge (V) Release Contact Resistance (mΩ) _ _ _ x x _ x _ _ x tact Resistance (m Ω) _ FTR-JRJB024W n=20 300 operation/min. 1000 Operation (x104) 2000 0.5 Initial 500 ct Resistance (mΩ) 20 18 16 14 12 10 8 6 4 2 0 200 100 50 20 10 5 2 Electrical Life Test FTR-JRJB024W n=10 10 operation/min. 277VAC,16A resistive Time (ms) Operate Release 20 18 16 14 12 10 8 6 4 2 0 200 100 50 20 10 5 2 Contact Resistance (m ) FTR-JRJB024W 100 operation/min. 125V (High voltage Trans n=15 load for Magnetron Oscillation) (Nominal Current 15.5 Arms with phase control) Operate Electrical Life Test 6 12 14 16 18 20 Release 4 FTR-JR SERIES n DIMENSIONS l Dimensions FTR-JB type 30.0+0.0 21.05 6.75 0.5 (6.25) l Schematics (TOP VIEW) 15.0+0.3 5.4 4.75 #187 6.35 l PC board mounting hole layout (BOTTOM VIEW) 6 5 4 To O 0.5 (2.8) 23.5 25.0 1.9 25.5+0.0 1 NO COM 2 O 1.0 3 23.5 ¿1.5 be 0.5 4 0.5 (0.2) l Dimensions FTR-JC type Di 11.0 5.4 1.0 sc 4.75 6.35 1.9 l Schematics (TOP VIEW) (21.05) 6.75 0.5 #187 on 6 COM Ti NO 5 2 3 l PC board mounting hole layout (BOTTOM VIEW) 25.5+0.3 nu (2.8) 2-O 1 11.0 O 0.5 (2.8) 26.0 1.0+0.2 (0.2) 4.0 1 11.0 13.5 eD (30.0) 26.0 2-Ø1.5 0.5 1.0 4 Unit: mm 13.5 (153.4) (2.0) 11.0 (2.0) COM NO (2.8) 25.0 5 FTR-JR SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 2, 2005. (Amendment to Directive 2002/95/EC) l To 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. be Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: Di maximum 120˚C dip within 5 sec. at 260˚C soler bath sc on Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. Ti nu We highly recommend that you confirm your actual solder conditions eD 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 FTR-JR SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. To be Di sc on Ti nu eD 7