FTR-K1AK005EMABG

FTR-K1 SERIES POWER RELAY 1 POLE - 12A FTR-K1 Series n FEATURES l l l l RoHS compliant l l l l l l 2A 3.5mm and 5.0mm terminal pitch Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 0mm min. Dielectric strength: 5KV Surge strength: 0KV Low coil power (400mW) Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved RoHS Compliant UL F class isolation wire VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) (g) FTR-K C K 005 W (a) (b) (c) (d) (e) -MA (f ) – BG (g) Series Name Contact Arrangement Coil Type / Enclosure Nominal Voltage Contact Material / TV type Terminal pitch FTR-K : FTR-K Series A C K :  form A (SPST-NO) :  form C (SPDT) : Standard (400 mW) / flux free 006 : 6VDC, 009 : 9VDC 022 :022VDC 024 : 24VDC 02 : 2VDC 028 : 28VDC 005 : 5 VDC, 08 : 8 VDC 048 : 48VDC W E : AgSnO2 : AgNi MA : 3.5mm pitch MB : 5.0mm pitch BG : Gold plated ; 3µm Special Designation Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-KCK02W Actual marking: KCK02W  FTR-K1 SERIES n PART NUMBERS Ordering Part Number FTR-KAK005W-MA FTR-KAK006W-MA FTR-KAK009W-MA FTR-KAK02W-MA FTR-KAK08W-MA FTR-KAK022W-MA FTR-KAK024W-MA FTR-KAK028W-MA FTR-KAK048W-MA FTR-KCK005W-MA FTR-KCK006W-MA FTR-KCK009W-MA FTR-KCK02W-MA FTR-KCK08W-MA FTR-KCK022W-MA FTR-KCK024W-MA FTR-KCK028W-MA FTR-KCK048W-MA 3.5mm pitch and silver nickel type Ordering Part Number FTR-KAK005E-MA FTR-KAK006E-MA FTR-KAK009E-MA FTR-KAK02E-MA FTR-KAK08E-MA FTR-KAK022E-MA FTR-KAK024E-MA FTR-KAK028E-MA FTR-KAK048E-MA FTR-KCK005E-MA FTR-KCK006E-MA FTR-KCK009E-MA FTR-KCK02E-MA FTR-KCK08E-MA FTR-KCK022E-MA FTR-KCK024E-MA FTR-KCK028E-MA FTR-KCK048E-MA K: 430 mW C:  form C K: 400 mW FTR-K K: 430 mW A:  form A K: 400 mW Series Contact Coil Power Coil Voltage 5 6 9 2 8 22 24 28 48 5 6 9 2 8 22 24 28 48 2 3.5mm pitch and silver tin oxide type Series Contact Coil Power Coil Voltage 5 6 9 A:  form A K: 400 mW 2 8 22 24 28 FTR-K K: 430 mW 48 5 6 9 C:  form C K: 400 mW 2 8 22 24 28 K: 430 mW 48 Contact Material Terminal Pitch W: AgSnO2 MA: 3.5mm Contact Material Terminal Pitch E: AgNi MA: 3.5mm FTR-K1 SERIES 5.0mm pitch and silver tin oxide type Ordering Part Number FTR-KAK005W-MB FTR-KAK006W-MB FTR-KAK009W-MB FTR-KAK02W-MB FTR-KAK08W-MB FTR-KAK022W-MB FTR-KAK024W-MB FTR-KAK028W-MB FTR-KAK048W-MB FTR-KCK005W-MB FTR-KCK006W-MB FTR-KCK009W-MB FTR-KCK02W-MB FTR-KCK08W-MB FTR-KCK022W-MB FTR-KCK024W-MB FTR-KCK028W-MB FTR-KCK048W-MB 5.0mm pitch and silver nickel type Ordering Part Number FTR-KAK005E-MB FTR-KAK006E-MB FTR-KAK009E-MB FTR-KAK02E-MB FTR-KAK08E-MB FTR-KAK022E-MB FTR-KAK024E-MB FTR-KAK028E-MB FTR-KAK048E-MB FTR-KCK005E-MB FTR-KCK006E-MB FTR-KCK009E-MB FTR-KCK02E-MB FTR-KCK08E-MB FTR-KCK022E-MB FTR-KCK024E-MB FTR-KCK028E-MB FTR-KCK048E-MB K: 430 mW C:  form C K: 400 mW FTR-K K: 430 mW A:  form A K: 400 mW Series Contact Coil Power Coil Voltage 5 6 9 2 8 22 24 28 48 5 6 9 2 8 22 24 28 48 3 Series Contact Coil Power Coil Voltage 5 6 9 Contact Material Terminal Pitch A:  form A K: 400 mW 2 8 22 24 28 FTR-K K: 430 mW 48 5 6 9 W: Silver tin oxide MB: 5.0mm C:  form C K: 400 mW 2 8 22 24 28 K: 430 mW 48 Contact MBterial Terminal Pitch E: Silver nickel MB: 5.0mm FTR-K1 SERIES n COIL DATA CHART Coil Voltage 005 006 009 02 08 022 024 028 048 Nominal Voltage (VDC) 5 6 9 2 8 22 24 28 48 Max. Coil Voltage* 2.2 VDC 14.7 VDC 22.0 VDC 29.4 VDC 44. VDC 53.9 VDC 58.8 VDC 68.6 VDC 117.6 VDC Coil Must Operate Must Resistance Voltage*2 Release Voltage*2 (±0%) 62 Ω 90 Ω 202 Ω 360 Ω 810 Ω 1,210 Ω 1,440 Ω 1,960 Ω 5,360 Ω 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 2.6 VDC 5.4 VDC 6.8 VDC 9.6 VDC 33.6 VDC 0.5 VDC 0.6 VDC 0.9 VDC .2 VDC .8 VDC 2.2 VDC 2.4 VDC 2.8 VDC 4.8 VDC 430 400 Nominal Power (mW) Note: All values in the table are measured at 20°C. *: No contact current at 20°C *2: Specified values are subject to pulse wave voltage n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating Maximum Carrying Current*1 Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load*2 Coil Nominal Power (at 20ºC) Operate Power (at 20ºC) Operating Temperature Time Value Life Operate Release (without diode) Mechanical Electrical Other Vibration Resistance Shock Resistance Weight AC Contact rating DC contact rating Misoperation Endurance Misoperation Endurance FTR-K (A, C)K ( )(W, E)-MA FTR-K (A, C)K ( )(W, E)-MB  form A,  form C W: AgSnO2, E: AgNi Maximum 100 mΩ at 1 A, 6 VDC 2 A, 250 VAC / 24 VDC 4 A 3,000 VA / 288W 440 VAC / 300VDC 0 mA 5 VDC 400mW (at 430mW 48V coil) 200 mW (20mW at 48V coil) -40ºC to +85ºC (no frost) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) 20 x 106 operations minimum 100 x 103 operations min. 100 x 103 operations min. 10 to 55 Hz, at double amplitude of 0.7 mm 0-55Hz, at double amplitude of .5 mm Min. 00m/s2 (±ms) Approximately 13g Min. ,000m/s2 (6±ms) * Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 4 FTR-K1 SERIES n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-K Minimum 1,000 MΩ 1 min. ,000 VAC (50/60 Hz)  min. 5,000 VAC (50/60 Hz)  min. 0,000 V 0 mm / 0 mm 250 V 3 IIIa 1.2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN680- VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE00b) C / 250 V n SAFETY STANDARDS Type UL Compliance UL 508 E6364 Contact rating Flammability: UL 94-V0 (plastics) FTR-KCK( )W-(MA, MB) 2A, 24 VAC (resistive) 16A, 277 VAC (resistive) 1/2 HP, 277VAC /3HP, 3 HP, 25VAC /8HP, 25VAC Pilot duty: B300 FTR-KAK( )W-(MA, MB) 6A, 24 VAC (resistive) 16A, 277 VAC (resistive) 1/2 HP, 277VAC /3HP, 3 HP, 25VAC Pilot duty: B300 CSA C22.2 No. 4 LR 40304 FTR-K(A,C)K( )W-(MA, MB) 12A, 277VAC/24 VAC (resistive) 16A, 277 VAC/24VAC (resistive) 1/2 HP, 277VAC /3HP, 3 HP, 25VAC Pilot duty: B300 FTR-K(A, C) K ( )W-(MA, MB) 12A, 250 VAC (cosØ=1), 85˚C 16A, 250 VAC (cosØ=1), 85˚C 12A, 24VDC (0ms), 85˚C 16A, 24VDC (0ms), 85˚C 3.5A, 250 VAC (cosØ=0.4), 85˚C 250VAC, 2 (3)A 40T85 VDE 0435, 0631, 0700, 0860, 4003848 SEMKO EN 6058-:992 and A EN 6095:993 and A+A Complies with NEMKO, DEMKO, FIMKO 5 FTR-K1 SERIES n CHARACTERISTIC DATA Nominal voltage multiplying factor Coil Temperature Rise 00 2.5 Operating Range Switching Current (A) FTR-K-MA,-MB 0A 2A Maximum Switching Power 50 20 0 5 2  DC resistive FTR-K-MA, -MB AC resistive Temperature Rise (deg.) 90 80 70 60 50 40 30 20 0 0 0 0.2 0.4 0.6 0.8 .0 .2 0A 2A 2.0 .5 .0 must op erate (hot voltage coil) 0.5 must ope 0 20 40 rate volta 60 ge (cool 80 coil) 0.5 0.2 0. 0 20 00 Ambient temperature (ºC) Contact Voltage (V) 50 00 200 500 000 Coil Power (W) Life Curve AC250V resistive DC24V resistive Service Life (03 operations) 000 500 300 200 00 50 30 20 0 0 FTR-K -MA,-MB 00 90 Distribution of Operation & Release Voltage FTR-KAK02W-MA N=00 Operate Release 00 90 80 Distribution of Operation & Release Time FTR-KAK02W-MA n=00 Operate Release AC250V cosφ=0.7 Distribution (%) 80 70 60 50 40 30 20 0 0 0 DC24V τ=7ms AC250V cosφ=0.4 DC24V τ=15ms 3 6 9 2 Contact Current Load (A) Distribution (%) 70 60 50 40 30 20 0 0 20 30 40 50 60 70 80 90 00 0 0 1 2 3 4 5 6 7 8 9 0 Nominal Voltage Multiplying Factor Distribution of Contact Resistance 00 90 FTR-KAK02W-MA N=00 Make contact Time (ms) Distribution (%) 80 70 60 50 40 30 20 0 0 0 0 20 Contact Resistance (mΩ) 30 40 50 6 FTR-K1 SERIES n DIMENSIONS l Dimensions FTR-KMA 29 +0.3 l Schematics (BOTTOM VIEW) 5 12.7 +0.3 6 NC NO 8 15.7+0.3 COM 4 2 Orientation mark 3.3 Presolder φ 0.45 (2.6) 20 0.5 0.3 3.5 3.5 0.5 0.9 (2.6) 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 2-φ 20 3-φ.3 3.5 3.5 (2.6) 7.5 (12.7) l Dimensions FTR-KMB 29 +0.3 l Schematics (BOTTOM VIEW) 12.7 +0.3 5 NC 6 NO 8 15.7 COM 4 2 Orientation mark Presolder φ 0.45 (2.6) 20 0.5 0.3 5 5 0.5 3.3 0.9 (2.6) 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 2-φ  20 3-φ .3 5 5 (2.6) 7.5 Unit: mm 7 FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 8 FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. July 2, 2008. 9