FTR-K1CK024E

FTR-K1 SERIES POWER RELAY 1 POLE - 16A Silver Nickel Contact RoHS compliant FTR-K1 Series n FEATURES l l l l l l l l Suitable for low current load (silver nickel) Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge strength: 10KV Low coil power (400mW) SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved ( form A type) RoHS Compliant UL F class isolation VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) FTR-K C K 005 W (a) (b) (c) (d) (e) Series Name Contact Arrangement Coil Type / Enclosure Nominal Voltage Contact Material FTR-K : FTR-K Series A C K :  form A (SPST-NO) :  form C (SPDT) : Standard (400 mW) / flux free 006 : 6VDC, 022 :022VDC 009 : 9VDC 024 : 24VDC, 02 : 2VDC 028 : 28VDC 005 : 5 VDC, 08 : 8 VDC 048 : 48VDC E : AgNi Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W  FTR-K1 SERIES n PART NUMBERS 400mW type Ordering Part Number FTR-KAK005E FTR-KAK006E FTR-KAK009E FTR-KAK02E FTR-KAK08E FTR-KAK022E FTR-KAK024E FTR-KAK028E FTR-KAK048E FTR-KCK005E FTR-KCK006E FTR-KCK009E FTR-KCK02E FTR-KCK08E FTR-KCK022E FTR-KCK024E FTR-KCK028E FTR-KCK048E K: 430 mW C:  form C K: 400 mW FTR-K K: 430 mW A:  form A K: 400 mW Series Contact Coil Power Coil Voltage 5 6 9 2 8 22 24 28 48 5 6 9 2 8 22 24 28 48 E: AgNi Contact Material n COIL DATA CHART Coil Voltage 005 006 009 02 08 022 024 028 048 Nominal Voltage (VDC) 5 6 9 2 8 22 24 28 48 Max. Coil Voltage* 12.2 VDC 14.7 VDC 22.0 VDC 29.4 VDC 44.1 VDC 53.9 VDC 58.8 VDC 68.6 VDC 117.6 VDC Coil Must Operate Must Resistance Voltage*2 Release Voltage*2 (±0%) 62 Ω 90 Ω 202 Ω 360 Ω 810 Ω 1,210 Ω 1,440 Ω 1,960 Ω 5,360 Ω 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 12.6 VDC 15.4 VDC 16.8 VDC 19.6 VDC 33.6 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.8 VDC 2.2 VDC 2.4 VDC 2.8 VDC 4.8 VDC 430 400 Nominal Power (mW) Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 2 FTR-K1 SERIES n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating Maximum Carrying Current*1 Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load*2 Coil Nominal Power (at 20ºC) Operate Power (at 20ºC) Operating Temperature Time Value Life Operate (without diode) Release (without diode) Mechanical Electrical Other Vibration Resistance Shock Resistance Weight AC Contact rating DC contact rating Misoperation Endurance Misoperation Endurance FTR-K AK ( ) E  form A AgNi Maximum 100 mΩ at 1 A, 6 VDC 6 A, 250 VAC / 24 VDC 20 A 4,000 VA / 384W 440 VAC / 300VDC 0 mA 5 VDC 400mW (at 430mW 48V coil) 200 mW (20mW at 48V coil) -40ºC to +85ºC (no frost) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) 20 x 106 operations minimum 100 x 103 operations min. 100 x 103 operations min. 50 x 103 operations min. 30 x 103 operations min. FTR-K CK ( )E  from C 10 to 55 Hz, at double amplitude of 0.7 mm 10-55Hz, at double amplitude of 1.5 mm Min. 100m/s2 (±ms) Approximately 13g Min. 1,000m/s2 (6±ms) * Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 FTR-K1 SERIES n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-K Minimum 1,000 MΩ 1 min. 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC (50/60 Hz) 1 min. 0,000 V 0 mm / 0 mm 250 V 3 IIIa 1.2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE00b) C / 250 V n SAFETY STANDARDS Type UL Compliance UL 508 E63614 Contact rating FTR-KCK ( ) E Flammability: UL 94-V0 (plastics) 16A, 277VAC/24VDC (resistive) 20A, 277VAC (resistive) 1 HP, 277VAC /2 HP, 25VAC /8 HP, 25VAC Pilot duty: B300 16A, 277VAC/24VDC (resistive) 1 HP, 277VAC /2 HP, 25VAC /8 HP, 25VAC Pilot duty: B300 16A, 250 VAC (cosØ=1), 85˚C 3.5A, 250 VAC (cosØ=0.4), 85˚C 16 A 24VDC (0ms), 85˚C 250VAC, 16 (3)A 40T85 16A, 277VAC/24 VDC (resistive) 20A, 277 VAC (resistive) 1 HP, 277VAC /2 HP, 25VAC Pilot duty: A300 16A, 277VAC/24 VDC (resistive) 1 HP, 277VAC /2 HP, 25VAC Pilot duty: A300 FTR-KAK ( ) E CSA C22.2 No. 14 LR 40304 VDE 0435, 0631, 0700, 0860, 40013848 EN 6058-:992 and A EN 61095:1993 and A1+A11 SEMKO Complies with NEMKO, DEMKO, FIMKO 4 FTR-K1 SERIES n CHARACTERISTIC DATA Coil Temperature Rise 00 Nominal voltage multiplying factor Operating Range 2.5 FTR-K 2 0A 1.5 6A Maximum Switching Power 50 Temperature Rise (deg.) 90 80 70 60 50 40 30 20 0 0 0 0.2 0.4 0.6 0.8  1.2 0A 0A 6A Switching Current (A) 20 0 5 2  0.5 0.2 0.1 0 20 AC resistive FTR-K  mu te volta st opera ge (hot coil) 0.5 must ope 0 20 rate volta 40 ge (cool c oil) DC resistive 60 80 00 Coil Power (W) Ambient temperature (ºC) 50 00 200 500 000 Contact Voltage (V) Distribution of Operation & Release Voltage FTR-KCK02W n=200 Operate Release Service Life (03 operations) Service Life (03 operations) 000 500 300 200 00 50 30 20 0 0 2 4 Life Curve 250VAC resistive 24VDC resistive FTR-KAK 000 500 300 200 00 50 30 20 0 Life Curve 250VAC resistiveFTR-KCK 250VAV cosφ=0.7 24VDC resistive 250VAC cosφ=0.4 24VDC τ=7ms 00 90 80 Distribution (%) 250VAC cosφ=0.7 70 60 50 40 30 20 DC24V τ=7ms AC250V cosφ=0.4 DC24V τ=15ms 24VDC τ=15ms 6 8 0 2 4 6 8 20 Contact Current Load (A) 0 Contact Current Load (A) 2 4 6 8 0 2 4 6 8 20 0 0 0 0 20 30 40 50 60 70 80 Nominal Voltage Multiplying Factor Distribution of Operation & Release Time FTR-KCK02W n=200 Operate 00 90 80 Distribution of Contact Resistance 00 90 80 FTR-KCK02W n=200 Make Break Distribution (%) Distribution (%) 9 0 70 60 50 40 30 20 0 0 0 1 2 3 4 5 6 Release 70 60 50 40 30 20 0 7 8 0 Time (ms) 0 Contact Resistance (mΩ) 0 20 30 40 50 5 FTR-K1 SERIES n DIMENSIONS l Dimensions FTR-KAK ( ) E 29 +0.3 12.7 +0.3 l Schematics (BOTTOM VIEW) 5 6 COM 7 8 NO 15.7 +0.3 COM 4 3 2  NO Orientation mark φ 0.45 (2.6) 3.3 0.3 20 5 0.5 0.9 2.6 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 2-Ø ±0.1 20 4-Ø1.3 (2.6) 5 l Dimensions FTR-KCK ( ) E 29 +0.3 12.7 +0.3 l Schematics (BOTTOM VIEW) 5 6 NC COM 7 8 NO 15.7 +0.3 NC COM 4 3 2  NO Orientation mark 3.3 φ 0.45 0.5 0.3 5 (2.6) 20 5 0.5 0.9 2.6 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 2-φ1 ±0.1 20 6-φ1.3 -0 5 5 (2.6) 7.5 Unit: mm 7.5 6 FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 7 FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 30, 2009. 8