FTR-K1L012WLABG

FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Sensitivity RoHS compliant FTR-K1 Series n FEATURES l l l l l l l l l Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 0mm min. Dielectric strength: 5KV Surge strength: 0KV UL F Class wire Low coil power (400mW) Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved ( form A type) RoHS Compliant UL F class isolation VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) (f) FTR-K A L 005 W (a) (b) (c) (d) (e) LA (f ) (– BG) (g) Series Name Contact Arrangement Coil Type / Enclosure Nominal Voltage Contact Material / TV type Terminal Pitch Special Designation FTR-K : FTR-K Series A L 005 08 W LA LB BG :  form A (SPST-NO) : High sensitivity (200 mW) / flux free : 5 VDC, : 8 VDC : AgSnO2 : 0A high sensitive (250 W) 3.5mm pitch m : 0A high sensitive (250 W) 5.0mm pitch m : Gold plated ; 3µm 006 : 6VDC, 024 : 24VDC, 009 : 9VDC 048 : 48VDC 02 : 2VDC Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-KAL02WLA Actual marking: KAL02WLA  FTR-K1 SERIES n PART NUMBERS 250mW type Ordering Part Number FTR-KAL005W-LA-(BG) FTR-KAL006W-LA-(BG) FTR-KAL009W-LA-(BG) FTR-KAL02W-LA-(BG) FTR-KAL08W-LA-(BG) FTR-KAL024W-LA-(BG) FTR-KAL048W-LA-(BG) FTR-KAL005W-LB-(BG) FTR-KAL006W-LB-(BG) FTR-KAL009W-LB-(BG) FTR-KAL02W-LB-(BG) FTR-KAL08W-LB-(BG) FTR-KAL024W-LB-(BG) FTR-KAL048W-LB-(BG) FTR-K A:  form A L: 250 mW Series Contact Coil Power Coil Voltage 5 6 9 2 8 24 48 5 6 9 2 8 24 48 LB: 0A 5.0mm pitch W: AgSnO2 BG: Gold plated LA: 0A 3.5mm pitch Contact Terminal Material Pitch Special n COIL DATA CHART Coil Voltage 005 006 009 02 08 024 048 Nominal Voltage (VDC) 5 6 9 2 8 24 48 Max. Coil Voltage* 5.0 VDC 8.0 VDC 27.0 VDC 36.0 VDC 54.0 VDC 72.0 VDC 44.0 VDC Coil Must Operate Must Resistance Voltage*2 Release Voltage*2 (±0%) 100 Ω 145 Ω 325 Ω 575 Ω 1,300 Ω 2,310 Ω 9,216 Ω 3.75 VDC 4.5 VDC 6.75 VDC 9.0 VDC 3.5 VDC 8.0 VDC 36.0 VDC 0.5 VDC 0.6 VDC 0.9 VDC .2 VDC .8 VDC 2.4 VDC 4.8 VDC 250 Nominal Power (mW) Note: All values in the table are measured at 20°C. *: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 2 FTR-K1 SERIES n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating Maximum Carrying Current*1 Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load*2 Coil Nominal Power (at 20ºC) Operate Power (at 20ºC) Operating Temperature Time Value Life Operate (without diode) Release (without diode) Mechanical Electrical Other Vibration Resistance Shock Resistance Weight AC Contact rating DC contact rating Misoperation Endurance Misoperation Endurance FTR-K AL ( ) W- (LA, LB)  form A AgSnO2 Maximum 100 mΩ at 1 A, 6 VDC 0 A, 250 VAC 0 A 2,500VA 440 VAC 0 mA 5 VDC 250mW 4 mW -40ºC to +85ºC (no frost), (LB: -40ºC to +05ºC) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) 20 x 106 operations minimum 100 x 103 operations min. 10 to 55 Hz, at double amplitude of 0.7 mm 0-55Hz, at double amplitude of .5 mm Min. 00m/s2 (±ms) Approximately 13g Min. ,000m/s2 (6±ms) * Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 FTR-K1 SERIES n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-K Minimum 1,000 MΩ 1 min. ,000 VAC (50/60 Hz)  min. 5,000 VAC (50/60 Hz)  min. 0,000 V 0 mm / 0 mm 250 V 3 IIIa 1.2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN680- VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE00b) C / 250 V n SAFETY STANDARDS Type UL Compliance UL 508 E6364 CSA C22.2 No. 4 LR 40304 Contact rating Flammability: UL 94-V0 (plastics) FTR-KAL ( )W-(LA, LB) 10A, 277 VAC (resistive) /3 HP, 25VAC 1/2 HP, 277VAC Pilot duty: B300 FTR-KCL( )W-LA 10A, 277 VAC (resistive) FTR-KAL ( )W-(LA, LB) 0A, 250 VAC, 50,000 cycles, LA: 85ºC, LB:05ºC 3A, 250 VAC (cosØ=0.4), 00,000 cycles, LA: 85ºC, LB:05ºC FTR-KCL( )W-LA 0A, 250VAC, 00,000 cycles, 85ºC VDE 0435, 0631, 0700, 0860 SEMKO EN 6058-:992 and A 250VAC, 0 (3)A 40T85 (-LA) EN 6095:993 and A+A 250VAC, 0 (3)A 40T05(-LB) Complies with NEMKO, DEMKO, FIMKO 4 FTR-K1 SERIES n CHARACTERISTIC DATA Nominal voltage multiplying factor 00 Coil Temperature Rise Operating Range 2.5 FTR-K AL 2 0A 0A .5 50 Maximum Switching Power FTR-K-AL AC resistive Temperature Rise (deg.) Switching Current (A) 00 90 80 70 60 50 40 30 20 0 0 0 0.2 0.4 0A 0.6 0.8 .0 .2 0A 20 0 5 2  0.5 0.2 0. 0 20 50 00  e must op ol coil) oltage (co perate v must o ge (h rate volta ot coil) 0.5 0 Ambient temperature (ºC) 20 40 60 80 200 500 000 Contact Voltage (V) Distribution of Contact Resistance 00 90 80 FTR-KAL02W-LA N=00 Make Coil Power (W) Service Life (03 operations) Life Curve 000 500 300 200 00 50 30 20 0 0  2 3 4 5 6 7 8 250VAC resistive Distribution of Operation & Release Voltage 00 90 80 70 60 50 40 30 20 FTR-KAL02W-LA N=00 Operate Release FTR-K AL Distribution (%) Distribution (%) 250VAC cosφ=0.7 70 60 50 40 30 20 0 AC250V cosφ=0.4 (05ºC) 9 0  2 0 0 0 0 20 30 40 50 60 70 80 90 00 Contact Current Load (A) 0 Nominal Voltage Multiplying Factor 0 Contact Resistance (mΩ) 0 20 30 40 50 5 FTR-K1 SERIES n DIMENSIONS l Dimensions FTR-KAL ( ) W-LA 29 +0.3 12.7+0.3 l Schematics (BOTTOM VIEW) 5 NO 15.7+0.3 8 COM 4 2 3.3 Presolder φ 0.45 (2.6) 20 Orientation mark 0.3 0.5 3.5 0.9 (2.6) 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) ±0. 2-φ  (29) 20 2-φ .3±0. 3.5 (2.6) l Dimensions FTR-KAL ( ) W-LB 29 +0.3 12.7 +0.3 l Schematics (BOTTOM VIEW) 5 COM 7 8 NO 15.7 +0.3 COM 4 Orientation mark 2  NO 3.3 φ 0.45 (2.6) 20 ±0.25 0.3 5 0.5 0.9 (2.6) 7.5 0.9 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 2-φ±0. 20 4-φ .3±0. (2.6) 5 Unit: mm 7.5 7.5 6 FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 7 FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. July 2, 2008. 8