FTR-K1TAK048T

FTR-K1 SERIES POWER RELAY 1 POLE - 17A Tab Terminal RoHS compliant FTR-K1 Series n FEATURES l l l l l l l l l SPST 17A Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge strength: 10KV Low coil power (400mW) Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved (1 form A type) RoHS Compliant UL F class isolation wire VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) FTR-K1T A K 005 T (a) (b) (c) (d) (e) Series Name Tab Terminal Configuration Coil Type / Enclosure Nominal Voltage Contact Material FTR-KT : FTR-KT Series A J K 005 018 048 T : Vertical : Horizontal : Standard (400mW) / flux free : 5 VDC, 006 : 6VDC, 009 : 9VDC : 18 VDC 022 :022VDC 024 : 24VDC : 48VDC : AgSnO2 012 : 12VDC 028 : 28VDC Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W  FTR-K1 SERIES n PART NUMBERS 400mW type Ordering Part Number FTR-K1TAK005T FTR-K1TAK006T FTR-K1TAK009T FTR-K1TAK012T FTR-K1TAK018T FTR-K1TAK022T FTR-K1TAK024T FTR-K1TAK028T FTR-K1TAK048T FTR-K1TJK005T FTR-K1TJK006T FTR-K1TJK009T FTR-K1TJK012T FTR-K1TJK018T FTR-K1TJK022T FTR-K1TJK024T FTR-K1TJK028T FTR-K1TJK048T K: 430 mW J: Horizontal K: 400 mW FTRKT K: 430 mW A: Vertical K: 400 mW Series Tab Terminal Coil Power Coil Voltage 5 6 9 12 18 22 24 28 48 5 6 9 12 18 22 24 28 48 T: AgSnO2 Contact Material n COIL DATA CHART Coil Voltage 005 006 009 012 018 022 024 028 048 Nominal Voltage (VDC) 5 6 9 12 18 22 24 28 48 Max. Coil Voltage* 12.2 VDC 14.7 VDC 22.0 VDC 29.4 VDC 44.1 VDC 53.9 VDC 58.8 VDC 68.6 VDC 117.6 VDC Coil Must Operate Must Resistance Voltage*2 Release Voltage*2 (±10%) 62 Ω 90 Ω 202 Ω 360 Ω 810 Ω 1,210 Ω 1,440 Ω 1,960 Ω 5,360 Ω 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 12.6 VDC 15.4 VDC 16.8 VDC 19.6 VDC 33.6 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.8 VDC 2.2 VDC 2.4 VDC 2.8 VDC 4.8 VDC 430 400 Nominal Power (mW) Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 2 FTR-K1 SERIES n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating Maximum Carrying Current*1 Maximum Inrush Current Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load*2 Coil Nominal Power (at 20ºC) Operate Power (at 20ºC) Operating Temperature Time Value Life Other Operate (without diode) Release (without diode) Mechanical Electrical Vibration Resistance Shock Resistance Weight AC Contact rating Misoperation Endurance Misoperation Endurance FTR-KT ( ) K 1 form A AgSnO2 Maximum 100 mΩ at 1 A, 6 VDC 17 A, 250 VAC 17 A 78A, 120VAC (lamp load) 4,250VA 440 VAC 10 mA 5 VDC 400mW (at 430mW 48V coil) 200 mW (210mW at 48V coil) -40ºC to +105ºC (no frost) Maximum 15ms (at nominal voltage, no bounce) Maximum 5ms (at nominal voltage, no bounce) 20 x 106 operations minimum 100 x 103 operations min. 10 to 55 Hz, at double amplitude of 0.7 mm 10-55Hz, at double amplitude of 1.5 mm Min. 100m/s2 (±ms) Approximately 13g Min. 1,000m/s2 (6±1ms) * Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 FTR-K1 SERIES n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-KT Minimum 1,000 MΩ 1 min. 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC (50/60 Hz) 1 min. 10,000 V 10 mm / 10 mm 250 V 3 IIIa 1.2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE0110b) C / 250 V n SAFETY STANDARDS Type UL Compliance UL 508 E63614 CSA C22.2 No. 14 LR 40304 0435, 0631, 0700, 0860, 40013848 Contact rating FTR-KT ( )K Flammability: UL 94-V0 (plastics) 17A, 277 VAC (resistive) 1 HP, 277VAC 1/2 HP, 125VAC TV-5, 120VAC Pilot duty: A300 17A, 250 VAC (cosØ=1), 105˚C 3.5A, 250 VAC (cosØ=0.4), 105˚C 12A, 250 VAC (cosØ=1), 125˚C 5A/80A 250VAC 250VAC, 17 (3)A 40T105 VDE SEMKO EN 61058-1:1992 and A1 EN 61095:1993 and A1+A11 Complies with NEMKO, DEMKO, FIMKO 4 FTR-K1 SERIES n CHARACTERISTIC DATA 100 Coil Temperature Rise KT 17A Nominal voltage multiplying factor Temperature Rise (deg.) 2.5 Operating Range Switching Current (A) FTR-KT 50 20 10 5 2  0.5 0.2 0.1 Maximum Switching Power AC resistive FTR-KT 90 80 70 60 50 40 30 20 10 0 0 0.2 0.4 0.6 0.8 0A 10A 2 0A 1.5 17A  must op mus 0.5 0 20 voltage t operate 40 60 erate (hot co voltage il) (cool coi 80 l) DC resistive Coil Power (W) Life Curve  1.2 Ambient temperature (ºC) 100 10 20 50 100 200 500 1000 Contact Voltage (V) Service Life (103 operations) 1000 500 300 200 100 50 30 20 10 0 2 4 AC250V cosφ=0.4 AC250V FTR-K1TAK AC250V cosφ=0. Distribution of Operation & Release Voltage 100 90 80 FTR-K1TAK012T N=100 Operate Release Distribution of Contact Resistance 100 90 80 FTR-K1TAK012T N=100 Operate Distribution (%) Distribution (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 70 60 50 40 30 20 10 0 0 10 20 30 40 50 Contact Current Load (A) 6 8 10 12 14 16 18 20 Nominal Voltage Multiplying Factor Contact Resistance (mΩ) 5 FTR-K1 SERIES n DIMENSIONS l Dimensions FTR-K1TAK A6.3-0.8 6.35 ±0.1 l Schematics (BOTTOM VIEW) DIN 46244 (#250) NO COM 15.7 +0.3 (2.6) φ 0.45 Presolder 3.3 0.8 37.5 5 15 ±0.1 Orientation mark 0.8 0.8 (2.6) 0.8 7.5 12.7 +0.3 29 30.2 40.5+0.3 l PC board mounting hole layout (BOTTOM VIEW) 37.5 2-φ1 ±0.1 (12.7) 5 4-φ1.3 7.5 (30.2) NO COM 37.5 2-φ1 ±0.1 (12.7) 5 4-φ1.3 7.5 -0 -0 l Dimensions FTR-KTJK A6.3-0.8 DIN 46244 (#250) 6.35±0.1 l Schematics (BOTTOM VIEW) Orientation mark 14 ±0.1 15.7 +0.3 0.5 3.3 (2.6) φ 0.45 Presolder 29 37.5 40.5 +0.3 44.5 +0.3 0.8 5 0.8 (2.6) 0.8 7.5 12.7 0.8 l PC board mounting hole layout (BOTTOM VIEW) (30.2) Unit: mm 6 FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l  FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 6, 2008. 8