FTR-K2AK009T

POWER RELAY 1 POLE—16A (CADMIuM FREE CONTACTS TYPE) FTR-K2 SERIES RoHS compliant RoHS compliant n FEATuRES SPST-NO 6A HIGH ISOLATION Insulation Distance: Minimum 6mm between coil and contact Dielectric Strength: 4KV Surge Strength: 0KV l TV-5 rating l HEAT RESISTANCE, FLAMMABILITY Class B (130° C) insulation, flammability 94V-0 l CADMIUM FREE CONTACT FOR ECO-PROGRAM l SAFETY STANDARDS UL, CSA, VDE approved, SEMKO (pending) UL/CSA TV-5 rating approved l RoHS compliant since date code: 0437L2 Please see page 8 for more information l l n ORDERING INFORMATION [Example] (a) (b) (c) (d) FTR-K2 A K 02 T -( ) (a) b) (c) (d) (e) (f) ( FTR-K2: FTR-K2 series (6A) A:  Form A (SPST-NO) K: Standard (530mW) 005 : 5DC 02 : 2DC 048 : 48DC 006 : 6DC 08 : 8DC 009 : 9DC 024 : 24DC T: Silver-tin oxide (TV-5) OK: .0mm wide contact gap Series name Contact arrangement Coil type Coil nominal voltage (e) (f) Contact material Option  FTR-K2 Series n PART NuMBERS Standard: 530 mW Ordering Part Number FTR-K2AK005T FTR-K2AK006T FTR-K2AK009T FTR-K2AK02T FTR-K2AK08T FTR-K2AK024T FTR-K2AK048T FTR-K2  form A K: 530mW Series Contact Coil Power Coil Voltage 5 6 9 2 8 24 48 T: Silver tin oxide (TV-5 rated) Contact Material n COIL DATA CHART Coil Voltage 005 006 009 02 08 024 048 Standard Type (530mW) Nominal Voltage (VDC) 5 6 9 2 8 24 48 Max. Coil Voltage* 8.5 VDC 0.2 VDC 5.3 VDC 20.4 VDC 30.6 VDC 40.8 VDC 8.6 VDC Coil Resistance Must Operate ( ±0%) Voltage*2 47 Ω 68 Ω 155 Ω 270 Ω 610 Ω 1,110Ω 4,400 Ω 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 2.6 VDC 6.8 VDC 33.6 VDC Must Release Voltage*2 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC .2 VDC 2.4 VDC Note: All values in the table are measured at 20°C. *: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 2 FTR-K2 Series n SPECIFICATIONS Item Contact Arrangement Material Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Rating Maximum Switching Voltage Minimum Switching Load* Coil Nominal Power (20°C) Operate Power (20°C) Operating Temperature Time Value Operate Time (at nominal voltage) Release Time (at nominal voltage) Life Mechanical Electrical AC Contact rating DC Contact Rating Lamp load (TV-5) Other Vibration Resistance Shock Resistance Weight * FTR-K2AK ( )T  form A (SPST-NO) Silver tin oxide Maximum 100 mΩ (at 6VDC, 1A) 250 VAC / 30 VDC / 6A 6A 4000VA / 480W 400VAC / 300VDC 00 mA, 5 VDC 530 mW 260 mW -40ºC to +70ºC (no frost) Maximum 5 ms Maximum 5 ms 2 x 06 operations minimum 00 x 03 operations min. 00 x 03 operations minimum 25 x 03 operations minimum 0 to 55 Hz, at double amplitude of .5 mm 200m/s2 (±ms) 0 to 55Hz, at double amplitude of .5 mm ,000m/s2 (±ms) Misoperation Endurance Misoperation Endurance Approximately 13g Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 FTR-K2 Series n INSuLATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts FTR-K2 Minimum 1,000 MΩ 1 min. ,000 VAC (50/60 Hz)  min. 4,000 VAC (50/60 Hz)  min. 0,000 V 6 mm / 6 mm 250 V 2 III a B / 250 V .2 x 50µs standard wave Note at 500 VDC Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN680- VDE0435) Voltage Pollution Isolation material group Isolation category / Reference voltage (VDE 00b) n SAFETY STANDARDS Type UL Compliance UL 508 E6364 CSA C22.2 No. 4 LR 40304 Contact rating Flammability: UL 94-V0 (plastics) 6A, 30VDC (resistive) 6A, 25VAC (resistive) 0A, 277VAC (resistive) /2 HP,25VAC  HP. 277VAC TV-5, 20 VAC Pilot duty: A300 6A, 250 VAC (cosØ=) 8A, 250 VAC cosØ=0.4) 8A, 30 VDC (0ms) 250VAC 5/80A inrush 250 VAC, 0 (3) or 5/80 40T70 VDE 0435, 0860 SEMKO EN 61058-1: 1992 AND A1 EN 61095:1993 and A1+A11 Complies with CQC, NEMKO, DEMKO, FIMKO, 4 FTR-K2 Series n CHARACTERISTIC DATA 00 Coil temperature rise Nominal voltage mult. factor FTR-K2 2.0 .8 .6 .4 .2 .0 0.8 0.6 0 Operating range 00 FTR-K2 0A Maximum switching power Temperature rise (deg.) 50 80 6A Contact current (A) 20 0 5 2  DC resistive AC resistive 60 0A 6A e of h ot co il 40 0A Opera Op ltag te vo 20 olta erate v ge o coil f cool 0.5 0.2 0 0 0.2 Coil power (W) Life curve 0.4 0.6 0.8  .2 Ambient temperature (°C) 20 40 60 80 00 0. 0 Contact Voltage (V) 20 50 00 200 500 500 Service life (x04 operations) 00 50 AC250V/DC30V 0 5 DC 30V L/R=7ms AC250V cosφ=0.7 AC250V cosφ=0.4 DC30V L/R=5ms   5 0 5 20 Contact current load (A) n REFERENCE DATA 00 90 Distribution of operate & release voltage FTR-K2AK02T N=00 operate release Distribution of contact resistance 00 FTR-K2AK02T N=00 make Distribution (%) 80 70 60 50 40 30 20 0 0 0 0 20 30 40 Distribution (%) 80 60 40 20 0 50 60 70 80 0 2 4 6 8 0 2 4 Nominal voltage mult. factor (%) Contact resistance (mΩ) 5 FTR-K2 Series n DIMENSIONS l Dimensions 24 +0.3 +0.3  COM 2 l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) 2-φ 0.9 2-φ .3 ( .75 ) 7.5 3 +0.3 25 NO 4 Orientation mark ( .8 ) 3.3 0.5 6.5 3.5 φ 0.5 ( .8 ) 6.5 0.35 3.5 0.4 ( .75 ) 7.5  Unit: mm (in.) 6 FTR-K2 Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 7 FTR-K2 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. October 20, 2008. 8