FTR-LYAA012VSK

FTR-LY SERIES POWER RELAY 1 POLE - 6A (Medium Load Control) SLIM TYPE FTR-LY Series n FEATURES l l l RoHS compliant l l l l l Slim(5.0mm(h) x 5.0 mm(w) x 28.0mm (l) Mounting space: 40mm2, weight: 5.0g High insulation in small package (between coil and contacts) - Insulation Distance: 8mm min.) - Dielectric strength: 4,000 VAC - Surge strength: 6,000V Plastic materials - UL94 flame class V-0 - CTI>250 (UL CTI level class 2) UL, CSA, VDE, SEMKO under approval - UL: conforms to UL508, 604 - CSA: conforms to CSA22.2 No.4 - SEMKO: conforms to EN6058-, 6095 - VDE: conforms to VDE 0435, 063, 0700 Contains no lead and features cadmium-free contacts Socket type available RoHS Compliant since production FTR-LY A A 005 Y (a) (b) (c) (d) (e) SK (f) n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) Series Name Contact Arrangement Coil Type / Enclosure Nominal Voltage 02 Contact Material Socket Type FTR-LY : FTR-LY Series A C A :  form A :  form C P:  form A (Right Angle Type) R:  form C (Right Angle Type) : Standard / Plastic sealed 005 : 5 VDC, 006 : 6VDC, : 2VDC, 024 : 24VDC, 048 : 48VDC Y : Silver alloy V : Gold plated silver alloy NIL SK : PCB mounting type : Socket mounting type (contact arrangement A&C only) Actual marking does not carry the type name : "FTR" and "SK" E.g.: Ordering code: FTR-LYAA02Y Actual marking: LYAA02Y  FTR-LY SERIES n SPECIFICATIONS It em Contact Arrangemen t Material Style Resistance (initial) Rating Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Minimum Switching Load* Coil Operating Temperature Rating Power Must operate power Max. allowable voltage Time Value Insulation Operate Time (without diode) Release Time (without diode) Resistance (at 500VDC ) Dielectric Strength Between open contacts 1 FTR-LY 1 form C Singl e Maximum 100m ohm s 6A 250VAC or 6A 30VD C 6A 1,500VA 250VAC 10mA 5VDC 6A -40° C to +85° C (no frost ) 170m W 75mW 150% of nominal voltage (at 20 deg.) Maximum 8m s (at nominal voltage, no bounce) Maximum 4m s (at nominal voltage, no bounce) Minimum 1,000 Mohm s 1,000 VAC 1 minute 1 form A Gold plated silver alloy, silver alloy Maximum Switching Current Between coil and 4,000 VAC 1 minute contacts 6,000V (at 1.2 x 50 micro sec. ) 10 x 106 operations minimum 60 x103 ops. min. (N.O.) AC contact ratin g 30 x103 ops. min. (N.C.) at 6A 250VAC/30VDC Misoperation Endurance Misoperation Endurance 10 to 55 Hz, at double amplitude of 1.0mm 10-55 Hz, at double amplitude of 1.5m m Min. 50m/s2 (11±1ms) Min. 1,000m/ s2 (6±1ms) Approximately 4 g Min. 100m/ s2 (11±1ms) Surge Strength Life Mechanical Electrical Other Vibration Resistance Shock Resistance Weight 2 FTR-LY SERIES n COIL DATA CHART Mo d el 1 form A type 1 form C typ e FTR-LYAA005Y(-SK) FTR-LYCA005Y(-SK ) FTR-LYAA006Y(-SK) FTR-LYCA006Y(-SK ) Co i l No m i n al Res i s t an c e Vo l t ag e (± 10%) 5VD C 6VD C 14 7 Ω 21 2 Ω 84 7 Ω 3,38 8 Ω 10,60 0 Ω 14 7 Ω 21 2 Ω 84 7 Ω 3,38 8 Ω 10,60 0 Ω Mu s t Operate Vo l t ag e 3.3VDC 4.0VDC 8.0VDC 15.9VDC 31.7VDC 3.3VDC 4.0VDC 8.0VDC 15.9VDC 31.7VDC Mu s t Release Vo l t ag e 0.25VD C 0.3VD C 0.6VD C 1.2VD C 2.4VD C 0.25VD C 0.3VD C 0.6VD C 1.2VD C 2.4VD C No m i n al P o w er 170m W 170m W 170m W 170m W 217m W 170m W 170m W 170m W 170m W 217m W FTR-LYAA012Y(-SK) FTR-LYCA012Y(-SK ) 12VD C FTR-LYAA024Y(-SK) FTR-LYCA024Y(-SK ) 24VD C FTR-LYAA048Y(-SK) FTR-LYCA048Y(-SK ) 48VD C FTR-LYPA005Y FTR-LYRA005 Y 5VD C FTR-LYPA006Y FTR-LYRA006 Y 6VD C FTR-LYPA012Y FTR-LYPA024Y FTR-LYPA048Y FTR-LYRA012 Y FTR-LYRA024 Y FTR-LYRA048 Y 12VD C 24VD C 48VD C Note: All values in the table are measured at 20˚C. n DIMENSIONS Thru hole type 0.5 0.5 (0.7) 3.78 16.38 28 max. 0.5 1 1 5.04 5.04 1 Pre-soldering (1.2) 5 max. Drilling Plan (BOTTOM VIEW) Wiring Diagram (BOTTOM VIEW) (4.9) 2-O1±0.1 (0.7) 3.78±0.1 (*1) 3-O1.3±0.1 3.5 5.04±0.1 5.04±0.1 16.38±0.1 (27.8) (1.2) 15 max. *1: This terminal is not applicable for 1 form A type Unit: mm 3 FTR-LY SERIES n DIMENSIONS Right Angle type 15.5 15 max. 3 0.5 (0.7) 3.78 0.5 1 1 5.04 16.38±0.1 28 max. Drilling Plan (Bottom view) (X 1) 5.04 1 Pre-soldering Wiring Diagram (Bottom view) (4.9) (1.2) 2-O1±0.1 (X 1) (0.7) 3.78±0.1 16.38±0.1 (27.8) 3-O1.3±0.1 5.04±0.1 5.04±0.1 (X 1): this terminal is not applicable for 1 form A type Unit: mm 4 FTR-LY SERIES n DIMENSIONS Socket type 2-R0.8 F&T LYCA024V 24V DC 2 15 max. 1.2 0.4 Coil Voltage (example) Type Name (example) 2-R0.3 3 2-R0.7 0320 60 û 0.5 0.5 (0.7) 0.5 Date Code (example) 1 1 Country Name 1 Schematics (BOTTOM VIEW) PC Board Mounting Hole Layout (BOTTOM VIEW) 2O1±0.1 3O1.3±0.1 3.5 (0.7) 3.7±0.1 16.38±0.1 (27.8) (30.6) 5.04±0.1 5.04±0.1 (1.2) (4.9) 0.7 6.3 max. Unit: mm Notes: . Socket ordering code 2. Standard IC socket is not recommended. Please use JM-6N 5 FTR-LY SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 2, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 FTR-LY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-3) 5449-700 Fax: (8-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (-408) 745-4900 Fax: (-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #04-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 02/08/2006. 7