FTR-P3CN009W1-05

FTR-P3 SERIES COMPACT POWER RELAY 1 POLE—25 A FOR AUTOMOTIVE APPLICATIONS FTR-P3 Series Compact for high density packaging. (65% volume of previous generation FBR 5/52 Series). l High contact capacity with proven contact material. (100,000 operations, 14 V, 25 A achieved, even with reduced size). l 125˚C version is available. l Surface mount compatible version (reflowable) is available. l Coil power savings (600mW nominal achieved with state-of-the-art magnetic analysis/ design). l Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated). l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative). l Packaging for auto-insertion (tube packing, 30 relays/tube). l l RoHS compliant n FEATURES RoHS compliant since date code: 0630 Please see page 8 for more information n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) FTR-P3 C N 02 W *** (a) (b) (c) (d) (e) (f) FTR-P3 Series C N P 009 00 02 W :  Form C : 0.3mm gap : 0.6mm gap : 09VDC : 0VDC : 2VDC Series Name Contact Arrangement Contact Gap Nominal Coil Voltage Contact Material Custom Designation : Silver-tin oxide-indium Nil : Standard (85˚C) -01 : High temperature (125˚C) -05 : High temperature (125˚C) and reflowable -06 : High temperature (125˚C) and reflowable Higher stand-off Note: The part number stamped on the relay cover does not include "FTR". Example: Ordering part number: FTR-P3CN02W Stamped on part number: P3CN02W n TYPICAL APPLICATIONS Power seat Wiper/IWW Tilt steering Retractable antenna Power window Door lock Sun roof  FTR-P3 SERIES n SPECIFICATIONS Specification Item Arrangement Material Contact path Voltage Drop (Initial) Contact Rating Maximum Carry Current*1 Maximum Switching Current (Reference) Minimum Switching Load*2 (Reference) Coil Operating Ambient Temperature Range Storage Temperature Range Operate (at nominal voltage) Release (at nominal voltage) Mechanical Life Electrical Vibration Resistance Shock Resistance Operational Operational Withstand, no damage Standard 1 form C (SPDT ) Silver-tin oxide-indiu m Maximum 100 mV (at 1 A 12 VDC) 25 A at 14VDC (locked motor load) 25 A / 1hour (25° C, 100% rated coil voltage) 35 A at 16 VD C 1 A, 6 VD C -40° C to +85° C (no frost ) -40° C to +125° C (no frost ) High temperature version (-01, -05, -06) -40° C to+100° C (no frost ) -40° C to +125° C (no frost ) Maximum 10ms (not including bounce) Maximum 5ms (not including bounce, no diode) Maximum 15ms (not including bounce, with diode) 10 x 1 06 operations minimum 100 x 103 operations minimum, 14 VDC, 25 A (locked motor load) (1 operation = 1 forward and 1 reverse) 10-55Hz, 1.5mm double amplitude (=9.13G @ 55Hz) 100 m/ s2 minimum (10G) 1, 000 m/ s2 minimum (100G) 100M ohms @500 VA C 500 VA C Approximately 5 g Timing Values Other Insulation Resistance (initial) Dielectric Withstanding Voltage (initial) Weight *1 Need to consider the head from PCB when max. current is more than 10A. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. 2 FTR-P3 SERIES n COIL DATA CHART FTR-P3 Series (0.25mm contact gap) Model Nominal Coil Voltage 9VD C 10VD C 12VD C Coil Resistance (±10% at 20ºC) 13 5 Ω 16 7 Ω 24 0 Ω Must Operate Voltage 5.5VDC (at 20° C) 6.9VDC (at 85° C) 6.3VDC (at 20° C) 7.9VDC (at 85° C) 7.3VDC (at 20° C) 9.2VDC (at 85° C) Must Release Voltage (at 20ºC) 0.75VDC 0.9VDC 1.0VDC Coil Power at Nominal Voltage 0.6 W 0.6 W 0.6 W Thermal Resistance (approx.) 73° C/ W 73° C/ W 73° C/ W FTR-P3CN009W1 ( ) FTR-P3CN010W1 ( ) FTR-P3CN012W1 ( ) Note: ( ) is "Nil", "-0", "05", or "-06" FTR-P3 Series (0.6mm contact gap) Model Nominal Coil Voltage 9VDC 0VDC 2VDC Coil Resistance (±0% at 20°C) 100Ω 125Ω 167Ω Must Operate Voltage 5.5VDC (at 20ºC) 6.9VDC (at 85ºC) 6.3VDC (at 20ºC) 7.9VDC (at 85ºC) 7.3VDC (at 20ºC) 9.2VDC (at 85ºC) Must Release Voltage (at 20°C) 0.75VDC 0.9VDC .0VDC Coil Thermal Power at Resistance Nominal (approx.) Voltage 0.8W 0.8W 0.8W 73ºC/W 73ºC/W 73ºC/W FTR-P3-CP009W FTR-P3-CP00W FTR-P3-CP02W n REFERENCE DATA 100 Operating/release voltage distribution Data: FTR-P3 Units: n = 100 Operate Release 100 Operate and release time distribution Data: FTR-P3 Units: n = 100 Operate Release with diode 100 Contact resistance distribution Data: FTR-P3 Units: n = 100 80 80 80 Distribution (%) Distribution (%) Distribution (%) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 60 60 60 40 40 40 20 20 20 0 0 0 10 20 30 40 50 60 Ratio to rated voltage (%) 70 80 0 Time (ms) 0 10 20 30 40 50 60 70 80 Contact resistance (m) 3 FTR-P3 SERIES n CHARACTERISTIC DATA 1. LIFE TEST (EXAMPLES) Percent of nominal coil voltage (%) • Change of operate and release voltage • Test item  V DC-25 A 100 locked motor 00K operations* minimim 80 0.25 seconds ON, 9.75 seconds OFF OPERATE RL-1 N.O. N.C. N.O. N.C. RL-2 M 60 40 20 RELEASE 20 50 100 500 1000 0 • Current wave form (RL-1) 25 A 0A (RL-2) 25 A 0A 0.25 sec 10 sec • Change in contact resistance 1000 Initial Number of operations* (x 103 times) (Measured at 6 VDC, 1A wet) Contact Resistance (mΩ) 100 0.25 sec 5 sec 10 * 1 operation = 1 forward and 1 reverse 1 20 50 Initial Number of operations* (x 103 times) 100 500 1000 RL N.O. N.C. M Percent of nominal coil voltage (%) • Test item • Change of operate and release voltage  V DC, 100 inrush current: 7A motor free 80 300K operations minimum 0.25 seconds ON, OPERATE 9.75 seconds OFF 60 40 20 0 RELEASE Initial 20 50 Number of operations (x 103 times) 100 500 1000 • Current wave form 17 A • Change in contact resistance 1000 (Measured at 6 VDC, 1A wet) Contact Resistance (mΩ) 0A 1.5 A 12 A 100 10 1 Initial 20 50 Number of operations (x 103 times) 100 500 1000  FTR-P3 SERIES 2. MAXIMUM BREAK CAPACITY 100 3. COIL TEMPERATURE RISE Coil temperature rise (degrees C) 120 100 80 60 40 20 0 0.6 W 0.6 W 50 Motor lock load FTR-P3CN P3CP P3CN Ambient temperature: 20C Switching current (A) Contact carry current: 20A 0.6 W 20 10 Contact carry current: 10A Contact carry current: 0.0A 5 2 1 10 12 14 16 20 25 30 0 10 20 30 Applied time (minutes) Source voltage (VDC) 4. OPERATING COIL VOLTAGE RANGE Ratio of coil voltage to nominal voltage (%) 140 120 Continuous operating range at 10A carry current 100 80 60 ate -oper Must -20 0 20 40 volta ge 40 -40 60 80 100 Ambient temperature C 5 FTR-P3 SERIES 5. VIBRATION RESISTANCE CHARACTERISTIC Dual amplitude (mm) Acceleration (m/s2) 100 50 44 m/s2 5 1 0.5 0.1 0.01 On-vehicle Electronic equipment Standard 10 10 50 100 Frequency (Hz) 500 Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration axis : see drawing below Detection level : generation of 1 ms or longer contact opening Range where chattering occurs Break contact Coil deenergized on X-axis Z FTR-P3 Y X 1000 2000 6. SHOCK RESISTANCE CHARACTERISTIC 1,000 800 600 Shock duration : 111 ms, half-sine wave Test condition: coil, energized and de-energized Impact direction: see drawing below Detection level : generation of 1ms or longer contact opening Y2 : Break contact (coil de-energized) : Make contact (coil energized) X1 X2 Y1 Y2 Impact direction Z1 Z2 Z2 FTR-P3 Z1 X1 X2 Shock level (m/s2) Y1 400 200 0 6 FTR-P3 SERIES n DIMENSIONS AND SCHEMATICS Dimensions (Nil, -0 and -05) 17.4 +0.5 -0.5 7.2 -0.5 +0.5 13.5+0.5 -0.5 3.5 +0.5 -0.5 0.4 +0.5 -0.5 5 +0.2 5 +0.2 5 +0.2 -0.2 -0.2 -0.2 1.2 +0.2 -0.2 0.85 5.5 +0.2 -0.2 PCB mounting hole layout and schematic (Bottom view) 0.32 -0.10 +0.15 2.5 0 +0.1 5 -0.1 5 +1.3 Soldering 0.4 +0.15 -0.10 0.8 +0.15 -0.10 1 +0.15 -0.10 1.2 +0.1 -0.1 +0.1 -0.1 5 +0.1 -0.1 0.8 +0.15 -0.10 5.5 +0.1 -0.1 ¿1.5 0 +0.1 0.8 +0.15 -0.10 0.2 +0.15 -0.10 1 +0.15 -0.10 0.4 +0.15 -0.10 Dimensions (-06) 5 5 5 (1.2) 5- φ 1. 5 ± 0 .1 0 5. 5 Units: mm 7 FTR-P3 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 8 FTR-P3 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo  8630, Japan Tel: (8-3) 59-700 Fax: (8-3) 59-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 9089 U.S.A. Tel: (-08) 75-900 Fax: (-08) 75-970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. March , 2009. 9