FTR-P3CP024W1-06

FTR-K1 SERIES COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series n FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations, 14 V, 25 A) l Coil power savings (600mW nominal achieved with state-of-theart magnetic design) l Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated) l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative) l Packaging for auto-insertion (tube packing, 30 relays/tube) l Application examples: power window, power seat, tilt steering, sunroof, wiper, retractable antenna, etc. l Reflowable & high stand-off type available. l RoHS compliant Please see page 7 for more information l l n PARTNUMBER INFORMATION [Example] FTR-P3 C N 012 W1 -06 (a) (b) (c) (d) (e) (f) (a) Relay type FTR-P3 : FTR-P3 Series (b) Contact configuration A C : 1 form A (only with -06) : 1 form C (c) Contact gap N P : 0.25mm gap : 0.6mm gap (standard and -ML) (d) Coil rated voltage 012 : 9.....12VDC Coil rating table at page 3 (e) Contact material W1 : Silver-tin oxide indium (f) Special type None -ML -06 : Standard : Multi-layered contacts : High stand-off (Reflowable type) Actual marking does not carry the type name: "FTR (-ML) (-06)" E.g.: Ordering code: FTR-P3CN012W1-06 Actual marking: P3CN012W1 1 FTR-K1 SERIES FTR-P3 SERIES n SPECIFICATION Item FTR-P3 Standard (without suffix) Contact Data 1 form C (SPDT) Material Silver-tin oxide indium Contact path voltage drop Max. 100mV at 1A, 12VDC Contact rating 25A at 14VDC (locked motor load) Timing Data Insulation 25A/1 hour (25 °C, 100% rated coil voltage) Max. switching voltage 16VDC (reference) Max. switching current 35A (reference) Min. switching load * Coil data 1 Reflowable (-06) 1 form A 1 form C (SPST) (SPDT) Configuration Max. carrying current * Life Multi layered contact (-ML) 2 6VDC, 1A (reference) Mechanical Min. 10 x 106 operations Electrical Min. 100 x 103 operations, 14VDC, 25A (locked motor load) (1 operation = 1 forward and 1 reverse) Operating ambient temperature range -40 °C to +85 °C (no frost) -40 °C to +125 °C (no frost) Storage temperature range (no frost) -40 °C to +85 °C, 45 ~ 85% RH -40 °C to +125 °C, 45 ~ 85% RH Operate (at nominal voltage) Max. 10 ms (without bounce) Release (at nominal voltage) Max. 5 ms (without bounce, no diode) Max. 15 ms (without bounce, with diode) Resistance (initial) 100M Ω at 500VAC Dielectric withstanding voltage (initial) 500VAC, 1 minute Other Weight -40 °C to +100 °C, 45 ~ 85% RH Misoperation 10 to 200Hz, acceleration 43m/s2 (4.4G), constant acceleration Endurance 10 to 200Hz, acceleration 43m/s2 (4.4G), constant acceleration Misoperation 100m/s² minimum (11+/-1ms) Endurance 1,000m/s² minimum (6+/-1ms) Vibration resistance Shock Min. 1 x 106 operations Approximately 5 g * 1 Need to consider the heat from PCB when max. current is more than 10A. * 2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1 SERIES FTR-P3 SERIES n COIL RATING FTR-P3 Series (0.25mm contact gap) (Standard, multi layered contact) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 009 9 135 5.5 (at 20 °C) 0.7 (at 20 °C) 6.9 (at 85 °C) 0.9 (at 85 °C) 6.3 (at 20 °C) 0.8 (at 20 °C) 7.9 (at 85 °C) 1.0 (at 85 °C) 7.3 (at 20 °C) 1.0 (at 20 °C) 9.2 (at 85 °C) 1.3 (at 85 °C) 010 012 10 12 167 240 FTR-P3-06 Series Coil Code Rated Coil Voltage (VDC) Coil Resistance +/10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 009 9 135 5.5 (at 20 °C) 0.7 (at 20 °C) 6.9 (at 85 °C) 0.9 (at 85 °C) 7.8 (at 125 °C) 1.0 (at 125 °C) 6.3 (at 20 °C) 0.8 (at 20 °C) 7.9 (at 85 °C) 1.0 (at 85 °C) 8.9 (at 125 °C) 1.1 (at 125 °C) 7.3 (at 20 °C) 1.0 (at 20 °C) 9.2 (at 85 °C) 1.3 (at 85 °C) 10.3 (at 125 °C) 1.4 (at 125 °C) 010 012 10 12 167 240 FTR-P3 Series (0.6mm contact gap) (Standard, multi layered contact) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 009 9 100 5.5 (at 20 °C) 0.7 (at 20 °C) 6.9 (at 85 °C) 0.9 (at 85 °C) 6.3 (at 20 °C) 0.8 (at 20 °C) 7.9 (at 85 °C) 1.0 (at 85 °C) 7.3 (at 20 °C) 1.0 (at 20 °C) 9.2 (at 85 °C) 1.3 (at 85 °C) 010 012 10 12 125 167 Note: All values in the tables are valid for 20°C and zero contact current, unless otherwise stated. Must operate voltages/must release voltages at 125degC are available only for reflowable type. * Specified operate values are valid for pulse wave voltage. 3 FTR-K1 SERIES FTR-P3 SERIES n CHARACTERISTIC DATA 4 FTR-K1 SERIES FTR-P3 SERIES 5 FTR-K1 SERIES FTR-P3 SERIES Operating coil voltage range Operating coil voltage range (Standard/Multi-layered contacts) (Reflowable) 140 Coil 16.0V max. Continuous operating range at 10A carry current 100 Coil Voltage (V) Ratio to nominal coil voltage (%) 15 10A continuous 120 80 10 ltage te vo a r e t op Mus Operating temperature +125℃ min. 5 e oltag ate v r e p o Must 60 Continuous operating range at 10A carry current Operating temperature -40℃ min. 40 -30 -20 60 0 20 40 Ambient temperature (℃) 80 100 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature (℃) 6 FTR-K1 SERIES FTR-P3 SERIES DIMENSIONS n Standard multi layered contact FTR-P3 dimensions FTR-P3-06 dimensions FTR-P3CN*** W1 dimensions FTR-P3CN***W1-06 (1 form C) dimensions 17.4+0.5 7.2+0.5 7.2+0.5 17.4+0.5 1.3 1.3 14.1+0.3 14.1+0.3 7.2+0.5 0.4 13.5+0.5 17.4+0.5 FTR-P3AN***W1-06 (1 form A) dimensions 5 2.6- 2.6 3.5 1.2 5 1.2 5 10 10 15 10 15 5.5 5.5 Unit: mm 5.5 Unit: mm Unit: mm * Dimensions of the terminals does not include thickness of pre-solder l Schematics (BOTTOM VIEW) FTR-P3CN***W1(-ML) 1 FTR-P3CN***W1-06 (1 form C) 2 5 1 4 3 5 FTR-P3AN***W1-06 (1 form A) 1 2 4 2 5 3 4 l PC board mounting hole layout (Plated through hole) (BOTTOM VIEW) FTR-P3CN***W1(-ML) 5 (1.2) 5 5 -φ1.5 5 (1.2) (1.2) 5.5 5 FTR-P3AN***W1-06 (1 form A) +0,1 -0 5 -φ1.5 5 5 5.5 5 5.5 5 FTR-P3CN***W1-06 (1 form C) +0,1 -0 4 -φ1.5 +0.1 -0 Tolerance: +0.1 / -0 mm unless otherwise specified unit: mm 7 FTR-K1 SERIES FTR-P3 SERIES General Information 1. RoHS Compliance All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. l Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 2001/65/EU. Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for new designs. l All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf l 2. Recommended Lead Free Solder Condition Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. Recommended solder for assembly: Sn-3.0Ag-0.5Cu. l l Flow Solder Condition: Pre-heating: maximum 120˚C within 90 sec. Soldering: dip within 5 sec. at 255˚C ± 5˚C solder bath Relay must be cooled by air immediately after soldering Flow Solder Condition: Solder by Soldering Iron: Soldering Iron 30-60W Temperature: maximum 350-360˚C Duration: maximum 3 sec. Reflow Solder Condition: Reflow Solder Condition: Pre-heating: Soldering: maximum 170˚C within 120 sec. maximum 250˚C within 30 sec. Note: Please do not reflow non-reflowable relays. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level is not applicable, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 8 FTR-K1 SERIES FTR-P3 SERIES Fujitsu Components International Headquarter Offices Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 19F, 12-4, Higashi-shinagawa 4-chome, Shinagawa-ku, Tokyo,140-0002, Japan Tel: (81-3) 3450-1682 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/fcl/ Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components North and South America FUJITSU COMPONENTS AMERICA, INC 2290 North First Street, Suite 212 San Jose, CA 95131, USA Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: us.fujitsu.com/components China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 4306, InterContinental Center 100 Yu Tong Road, Shanghai 200070, China Tel: (86-21) 3253 0998 Fax: (86-21) 3253 0997 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fujitsu.com/uk/components Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD Unit 506, Inter-Continental Plaza No.94 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2881-8495 Tex: (852) 2894-9512 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ Korea FUJITSU COMPONENTS KOREA LIMITED Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82) 31-708-7108 Fax: (82) 31-709-7108 Email: fcal@sg.fujitsu.com www.fujitsu.com/sg/products/devices/components/ ©2016 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 20th, 2016 9