LZ-B12VME-HV-UC

POWER RELAY 1 POLE— 1, 3, 5, 10 A LZ SERIES n FEATURES l l (MEDIUM LOAD CONTROL) RoHS compliant UL, CSA, SEV recognized 4 kinds of contact ratings —Low level to 10 amps switching l Standard and high sensitivity types available l High surge strength version available l UL class B (130°C) insulation type available (only plastic sealed type) l Printed circuit terminals—fits grid with 0.1 inch l Plastic sealed type available l Lead Free since date code: 0437L2 Please see page 9 for more information n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) ( f ) (g) (h) ( i ) ( j ) LZ – B 12 H M S E – K HV – UC (a) (b) (c) (d) (e) (f ) (g) (h) ( i ) ( j ) LZ : LZ Series Nil : Standard type B : UL class B insulation type (130°C) Refer to the COIL DATA CHART Nil : 3 A H : 5 A V : 10 A (standard coil power only) W : 1 A (bifurcated) Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) Nil : Standard type (450 to 600 mW) S : High sensitive type (330 mW) Nil : Gold overlay silver-palladium (1A) (only LZ-W) Nil : Gold overlay silver-nickel (3 A, 5 A) Nil : Silver alloy (10 A) (only LZ-V) (contains cadmium) E : Silver-nickel (3 A, 5 A) Nil : Flux free type K : Plastic sealed type (recommended for new designs) C : Plastic sealed type (with tape) Nil : Standard type (4,000 V) HV : High surge strength type (6,000 V) UC UL, CSA approved type : 1 Series Name Coil Heat Proof Class Nominal Voltage Contact Rating Contact Arrangement Coil Power Contact Material (Rating) Enclosure Surge Strength Standard LZ SERIES n COIL DATA CHART LZ Standard MODEL Single 10 A Type LZ-(B) 1.5VM LZ-(B) 3VM LZ-(B) 5VM LZ-(B) 6VM LZ-(B) 9VM LZ-(B) 12VM LZ-(B) 18VM LZ-(B) 24VM LZ-(B) 48VM LZ-(B)100VM LZ-(B) 1.5 V LZ-(B) 3V LZ-(B) 5V LZ-(B) 6V LZ-(B) 9V LZ-(B) 12V LZ-(B) 18V LZ-(B) 24V LZ-(B) 48V LZ-(B) 100V 5 A Type LZ-(B)1.5H(M)(E) LZ-(B) 3H(M)(E) LZ-(B) 5H(M)(E) LZ-(B) 6H(M)(E) LZ-(B) 9H(M)(E) LZ-(B) 12H(M)(E) LZ-(B) 18H(M)(E) LZ-(B) 24H(M)(E) LZ-(B) 48H(M)(E) LZ-(B)100H(M)(E) 3 A Type LZ-(B) 1.5(M)(E) LZ-(B) 3 (M)(E) LZ-(B) 5 (M)(E) LZ-(B) 6 (M)(E) LZ-(B) 9 (M)(E) LZ-(B 12 (M)(E) LZ-(B) 18 (M)(E) LZ-(B) 24 (M)(E) LZ-(B) 48 (M)(E) LZ-(B)100(M)(E) Bifurcated 1 A Type LZ-(B)1.5W(M) LZ-(B) 3 W(M) LZ-(B) 5 W(M) LZ-(B) 6 W(M) LZ-(B) 9 W(M) LZ-(B) 12 W(M) LZ-(B) 18 W(M) LZ-(B) 24 W(M) LZ-(B) 48W(M) LZ-(B)100W(M) 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 1 2 VD C 1 8 VD C 2 4 VD C 4 8 VD C 100VDC 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 1 2 V DC 1 8 V DC 2 4 V DC 4 8 V DC 100VDC Nominal Voltage Coil Resistance (±10%) 5 20 56 80 180 320 720 1,280 3,800 22,200 5 20 56 80 180 320 720 1,280 3,800 22,200 Must Operate Voltage* 0.97 VDC 1.95 VDC 3.25 VDC 3.9 VDC 5.85 VDC 7.8 VDC 11.7 VDC 15.6 VDC 28.8 VDC 65.0 VDC Must Release Voltage* 0.08 VDC 0.15 VDC 0.25 VDC 0.3 VDC 0.45 VDC 0 . 6 V DC 0 . 9 V DC 1.2 VDC 2.4 VDC 5 . 0 V DC Nominal Power 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 600 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 600 mW 450 mW 1.2 VDC 0.08 VDC 2.4 VDC 0.15 VDC 4.0 VDC 0.25 VDC 4.8 VDC 0.3 VDC 7.2 VDC 0.45 VDC 9.6 VDC 0.6 VDC 14.4 VDC 0.9 VDC 19.2 VDC 1.2 VDC 38.4 VDC 2.4 VDC 80.0 VDC 5.0 VDC LZ-( )S High Sensitive MODEL Single 10 A Type 5 A Type LZ-(B)1.5H(M)S, (E) LZ-(B) 3H(M)S, (E) LZ-(B) 5H(M)S, (E) LZ-(B) 6H(M)S, (E) LZ-(B) \9H(M)S, (E) LZ-(B) 12H(M)S, (E) LZ-(B) 18H(M)S, (E) LZ-(B) 24H(M)S, (E) 3 A Type LZ-(B)1.5(M)S, (E) LZ-(B) 3 (M)S, (E) LZ-(B) 5 (M)S, (E) LZ-(B) 6(M)S, (E) LZ-(B) 9(M)S, (E) LZ-(B 12(M)S, (E) LZ-(B)18 (M)S, (E) LZ-(B) 24(M)S, (E) Bifurcated 1 A Type LZ-(B)1.5W(M)S LZ-(B) 3 W(M)S LZ-(B) 5 W(M)S LZ-(B) 6 W(M)S LZ-(B) 9 W(M)S LZ-(B)12 W(M)S LZ-(B)18 W(M)S LZ-(B)24 W(M)S 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Nominal Voltage Coil Resistance (±10%) 6.8 27 80 110 250 440 990 1,780 Must Operate Voltage* 0.97 VDC 1.95 VDC 3.25 VDC 3.9 VDC 5.85 VDC 7.8 VDC 11.7 VDC 15.6 VDC Must Release Voltage* 0.08 VDC 0.15 VDC 0.25 VDC 0 . 3 VD C 0.45 VDC 0 . 6 V DC 0 . 9 V DC 1.2 VDC Nominal Power 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW Note : All values in the table are measured at 20°C. *: Specified values are subject to pulse wave voltage. 2 LZ SERIES n SPECIFICATIONS Item Contact Coil Time Value Life Other LZ-( )Type (Standard Type) 10 A Type 5 A Type 3 A Type LZ( ), LZ-( )E 1 A Type LZ-( )W LZ-()V LZ-( )VM LZ-( )H, LZ-( )HE Arrangement 1 form A (SPST-NO) or 1 form C (SPDT) Gold overlay Gold overlay silver alloy Material Silver alloy Silver alloy (LZ-HE, E) silver-palladium (contains cadmium) Single (crossbar) Maximum 100 mΩ Maximum 70 mΩ (LZ-H,LZ) Resistance (initial) (at 1 A 6 VDC) Maximum 100 mΩ (LZ-HE, E) Configuration Single Bifurcated (crossbar) Max. 50 mΩ Rating (resistive) 10 A 120 VAC/24 VDC 5 A 120 VAC/24 VDC 3 A 120 VAC/30 VDC 1 A 120 VAC/30 VDC 1/4 HP 120 VAC 1/8 HP 120 VAC 1/10 HP 120 VAC Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 Nominal Power (at 20°C) Operating Temperature Operate (at nominal voltage) Release (at nominal voltage) Electrical Vibration Misoperation Resistance Endurance Shock Misoperation Resistance Endurance Weight 10 A 5 A 1,680 VA, 240 W 250 VAC, 150 VDC 10 A 5 A 3 A 1 A 0.1 mA 100 mVDC 100 mA 5 VDC 10 mA 5 VDC (LZ-H) 10 mA 5 VDC (LZ-) 100 mA 5 VDC (LZ-HE) 100mA 5VDC (LZ-E) 450 to 600 mW 170 to 220 mW –30°C to +70°C (no frost) (refer to the CHARATERISTIC DATA) Maximum 7 ms Maximum 4 ms 1 x 10 5 operations minimum (contact rating) 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 3.3 mm) 100 m/s 2 (11 ±1 ms) 1,000 m/s 2 (6 ±1 ms) Approximately 7.7g 960 VA, 120 W 1 A 600 VA, 90 W 190 VA, 30 W Operate Power (at 20°C) 290 to 390mW Mechanical 2 x 10 7 operations minimum *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 LZ SERIES n SPECIFICATIONS Contact Coil Time Value Insulation Life Other LZ-( ) S Type (High Sensitive Type) Item Arrangement Material Configuration Resistance (initial) (at 1 A 6 VDC) Rating Resistive Motor Load Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operate (at nominal voltage) Release (at nominal voltage) Resistance Dielectric between open contacts Strength between coil and contacts Surge Strength Mechanical Electrical Vibration Misoperation Resistance Endurance Shock Misoperation Resistance Endurance Weight 5 A Type LZ-( )HS, LZ( )HSE 3 A Type LZ-( )S, LZ-( )SE 1 A Type LZ-( )WS 1 form A (SPST-NO) or 1 form C (SPDT) Single (crossbar) Maximum 70 mΩ (LZ-HS, S) Maximum 100 mΩ (LZ-HSE, SE) 5 A 120 VAC/24 VDC 5 A 250 VAC, 150 VDC 5 A 3 A 1 A 10 mA 5 VDC (LZ-HS, S) 100 mA 5 VDC (LZ-HSE, SE) 330 mW 140 mW –30°C to +80°C (no frost) (refer to the CHARACTERISTIC DATA) Maximum 7 ms Maximum 4 ms Minimum 250 MΩ 750 VAC 1 minute 2,000 VAC 1 minute Standard type : 4,000 V (at 1.2 × 50 µs) High surge strength type: 6,000 V (at 1.2× 50 µs) 2 × 10 7 operations minimum 1× 10 5 operations minimum (rated load) 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 3.3 mm) 100 m/s 2 (11 ±1 ms) 1,000 m/s 2 ( 6 ±1 ms) Approximately 7.7 g 0.1 mA 100 mVDC Gold overlay silver nickel Silver nickel (LZ-HSE, SE) Gold overlay silver-palladium Bifurcated (crossbar) Maximum 50 mΩ 1 A 120 VAC/30 VDC 3 A 120 VAC/30 VDC 1/8 HP 120 VAC 1/10 HP 120 VAC 1 A 190 VA, 30 W 960 VA, 120 W 600 VA, 90 W *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 4 LZ SERIES n INSULATION LZ: Standard type Item Resistance (500VDC) Dielectric strength open contacts coil and contacts 10A Min. 250 MΩ 750 VAC 1min. 2,000 VAC 1 min. Standard: 4,000V, High Surge: 6,000V 1.2 x 50µs standard wave 5A 3A 1A Surge voltage LZ-( )S: High sensitive type Item Resistance (500VDC) Dielectric strength open contacts coil and contacts 10A Min. 250 MΩ 750 VAC 1min. 2,000 VAC 1 min. Standard: 4,000V, High Surge: 6,000V 1.2 x 50µs standard wave 5A 3A Surge voltage n SAFETY STANDARD AND FILE NUMBERS Type UL CSA Compliance Contact rating UL 508 E 56149, E 45026 C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [LZ-( )W, LZ-( )WS] 0.8A, 240VDC (resistive) 1A, 120VAC / 30VDC (resistive) [LZ-( ), LZ-( )S] 2.5A, 240 VDC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( ), LZ-( )S] 2.5A, 240 VAC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( )V] 7A, 240 VDC (resistive) 10A, 120 VAC / 30VDC (resistive) 1/4 HP, 120VAC/2400VAC Also complies with SEV 5 LZ SERIES n CHARACTERISTIC DATA 6 LZ SERIES n REFERENCE DATA 7 LZ SERIES n DIMENSIONS l Dimensions LZ-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) LZ-M-K, LZ-M-C type (Plastic sealed type) LZ type LZ-K, LZ-C type (Plastic sealed type) Unit: mm 8 LZ SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 9 LZ SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. November 30, 2007 10