LZG-12VME-K

POWER RELAY 1 POLE—1, 3, 5, 10 A (CADMIUM FREE CONTACTS TYPE) LZG SERIES s FEATURES q q q q q q q q UL (UL372, UL508, UL873), CSA, VDE 4 kinds of contact ratings —Low level to 10 amps switching Standard and high sensitivity types available High isolation in small package —Dielectric strength: 2,500 VAC (between coil and contacts) —Surge strength: 7,000 V UL class B (130°C) insulation type available (only plastic sealed type) Plastic sealed type Printed circuit terminals compatible with LZ relay Environmentally friendly cadmium free contact type is available. s ORDERING INFORMATION [Example] (a) (b) (c) DIS CO NT INU ED LZG – B (a) (b) 12 (c) H (d) M (e) S (f ) E–K (g) (h) Series Name LZG: LZG Series Coil Heat Proof Class Nil : Standard type B : UL Class B insulation type (130°C) Nominal Voltage Contact Rating Refer to the COIL DATA CHART Nil H V W : 3A : 5A : 10 A (only LZG-M) : 1 A (bifurcated) Contact Arrangement Coil Type Contact Material (Rating) Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) Nil : Standard type S : High sensitivity type (without LZG-V) Nil Nil Nil E : Gold overlay silver-palladium (only LZG-W) : Gold overlay silver-nickel (3 A, 5 A) : Silver alloy (10 A) (only LZG-VM) : Silver-nickel (3 A, 5 A) (d) (e) ( f) (g) (h) Enclosure Nil : Flux free type K : Plastic sealed type (only LZG-B) C : Plastic sealed type (with tape) (only LZG-B) 1 LZG SERIES s SAFETY STANDARD AND FILE NUMBERS UL372, 508, 873 (File No. E56140) C 22.2 No. 14 (File No. LR35579) VDE 0435 (File No. 11039-4940-1004) Please note that UL/CSA/VDE ratings may differ from the standard ratings. Only "NIL" and "H" contacts have VDE approval. Please request when the approval markings are required on the cover and/or relay recognized by SEV is required. Type LZG- ( ) LZG- ( )S Nominal voltage 1.5 to 48 VDC 1.5 to 24 VDC Contact rating 1/10 HP 120 VAC/240 VAC 2.5 A 240 VAC resistive 3 A 30 VDC/120 VAC resistive Pilot duty D 150 1/8 HP 120 VAC/240 VAC 4 A 240 VAC resistive 5 A 30 VDC/120 VAC resistive 1 A 250VAC inductive Pilot duty C 150 1/4 HP 120 VAC/240 VAC 7 A 240 VAC resistive 10 A 24 VDC/120 VAC resistive Pilot duty C 150 LZG- ( )H LZG- ( )HS LZG- ( )VM DIS CO NT INU ED 1.5 to 48 VDC 1.5 to 48 VDC 1.5 to 24 VDC 2 LZG SERIES s SPECIFICATIONS Item Contact Arrangement Material Style Resistance (initial) (at 1 A 6 VDC) Rating (resistive) Maximum Carrying Current Maximum Switching Power 10 A Type LZG-( )VM 1 form A (SPST-NO) Silver alloy Single Maximum 70 mΩ (LZG-H) Maximum 100 mΩ (LZG-VM, HE, E) 10 A 120 VAC/24 VDC 5 A 120 VAC/24 VDC 3 A 120 VAC/30 VDC 1/4 HP 120 VAC 1/8 HP 120 VAC 1/10 HP 120 VAC 10 A 1,680 VA, 240 W 5A 960 VA, 120 W 600 VA, 90 W 5 A Type 3 A Type 1 A Type LZG-( )W Gold overlay silver-palladium Bifurcated Max. 50 mΩ 1 A 120 VAC/30 VDC 1A 190 VA, 30 W LZG-( )H, LZG-( )HE LZG( ), LZG-( )E 1 form A (SPST-NO) or 1 form C (SPDT) Gold overlay silver alloy Coil Time Value Insulation DIS CO NT INU ED Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 Nominal Power (at 20°C) 250 VAC, 150 VDC 10 A 5A 3A Standard type: 0.45 to 0.6 W High sensitivity type: 0.33 W Operate Power (at 20°C) Operating Temperature Standard type: 0.17 to 0.22 W High sensitivity type: 0.14 W Standard type: –30°C to +70°C (no frost) High sensitivity type: –30°C to +80°C (no frost) (refer to the CHARACTERISTIC DATA) Operate (at nominal voltage) Maximum 7 ms Release (at nominal voltage) Resistance (at 500 VDC) Maximum 4 ms Minimum 250 MΩ Dielectric Strength between open contacts 750 VAC 1 minute between coil and contacts 2,500 VAC 1 minute Surge Strength 7,000 V (at 1.2 × 50 µs) 2 × 10 7 operations minimum 1 × 10 5 operations minimum (rated load) Misoperation Endurance Misoperation Endurance 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 3.3 mm) 100 m/s 2 (11 ±1 ms) 1,000 m/s 2 (6 ±1 ms) Approximately 9.2 g Mechanical Electrical Vibration Resistance Shock Resistance Weight 1A 10 mA 5 VDC (LZG-H) 100 mA 5 VDC (LZG-VM, HE, E) 0.1 mA 100 VDC Life Other *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 LZG SERIES s COIL DATA CHART MODEL Single 10 A Type 5 A Type 3 A Type Bifurcated 1 A Type 1.5 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC Nominal voltage Coil resistance (±10%) 5Ω 20 Ω 56 Ω 80 Ω 180 Ω 320 Ω 720 Ω 1,280 Ω 3,800 Ω Must operate voltage 0.97 VDC 1.95 VDC 3.25 VDC 3.9 VDC 5.85 VDC 7.8 VDC 11.7 VDC 15.6 VDC 28.8 VDC Must release voltage 0.08 VDC 0.15 VDC 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC 2.4 VDC 0.08 VDC 0.15 VDC 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC Nominal power 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 450 mW 600 mW 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW 330 mW LZG-(B) 1.5 VM LZG-(B) 1.5H (M) (E) LZG-(B) 1.5 (M) (E) LZG-(B) 1.5 W (M) LZG-(B) Standard Type LZG-(B) LZG-(B) LZG-(B) 3 VM LZG-(B) 5 VM LZG-(B) 6 VM LZG-(B) 9 VM LZG-(B) 3H (M) (E) LZG-(B) 5H (M) (E) LZG-(B) 6H (M) (E) LZG-(B) 9H (M) (E) LZG-(B) 3 (M) (E) LZG-(B) 5 (M) (E) LZG-(B) 6 (M) (E) LZG-(B) 9 (M) (E) LZG-(B) 3 W (M) 5 W (M) 6 W (M) 9 W (M) LZG-(B) 12 VM LZG-(B) 12H (M) (E) LZG-(B) 12 (M) (E) LZG-(B) 12 W (M) LZG-(B) 18 VM LZG-(B) 18H (M) (E) LZG-(B) 18 (M) (E) LZG-(B) 18 W (M) LZG-(B) 24 VM LZG-(B) 24H (M) (E) LZG-(B) 24 (M) (E) LZG-(B) 24 W (M) LZG-(B) 48 VM LZG-(B) 48H (M) (E) LZG-(B) 48 (M) (E) LZG-(B) 48 W (M) Note: All values in the table are measured at 20 °C. DIS CO NT INU ED LZG-(B) 1.5H (M)S (E) LZG-(B) 1.5 (M)S (E) LZG-(B) 1.5 W (M) S LZG-(B) 3H (M)S (E) LZG-(B) 5H (M)S (E) LZG-(B) 6H (M)S (E) LZG-(B) 9H (M)S (E) LZG-(B) 12H (M)S (E) LZG-(B) 18H (M)S (E) LZG-(B) 24H (M)S (E) LZG-(B) LZG-(B) LZG-(B) 3 (M)S (E) LZG-(B) 5 (M)S (E) LZG-(B) 6 (M)S (E) LGZ-(B) 1.5 VDC 3 VDC 6.8 Ω 0.97 VDC 3 W (M) S 5 W (M) S 6 W (M) S 27 Ω 80 Ω 1.95 VDC 5 VDC 3.25 VDC 6 VDC 9 VDC 110 Ω 3.9 VDC 5.85 VDC LZG-(B) 9 (M)S (E) LZG-(B) 9 W (M) S 250 Ω LZG-(B) 12 (M)S (E) LZG-(B) LZG-(B) 18 (M)S (E) LZG-(B) LZG-(B) 24 (M)S (E) LZG-(B) 12 W (M) S 18 W (M) S 24 W (M) S 12 VDC 18 VDC 440 Ω 990 Ω 7.8 VDC 11.7 VDC 24 VDC 1,780 Ω 15.6 VDC High Sensitivity Type 4 LZG SERIES s CHARACTERISTIC AND REFERENCE DATA Please see LZ relays. s DIMENSIONS q Dimensions LZG-M type q Schematics (BOTTOM VIEW) q PC board mounting hole layout (BOTTOM VIEW) LZG-M-K, LZG-M-C type (Plastic sealed type) LZG type DIS CO NT INU ED Dotted line : Seal tape (LZG-M-C Type) LZG-K, LZG-C type (Plastic sealed type) Dotted line : Seal tape (LZG-C type) Unit: mm 5 LZG SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 10/27/2004. DIS CO NT INU ED 6