MB40558

FUJITSU SEMICONDUCTOR DATA SHEET DS04-28205-2E ASSP 1 CHANNEL 8-BIT VIDEO A/D CONVERTER MB40558 s DESCRIPTION The Fujitsu MB40558 is a low power ultra-high speed video A/D converter fabricated with Fujitsu Advanced Bipolar Technology. The MB40558 also adopts the fully-parallel comparision technique (flash method) for high speed conversion and can concert wide bandanalog signal such as video signal to digital signal at sampling rate of DC through 40 Mega-samples/sec. Because of such high speed operation, the MB40558 is suitable for digital video applications such as the digital TV, video processing with computer, or ladder signal processing. s FEATURES • • • • • • • • • Resolution: Linearity Error: Maximum Conversion Rate: Digital I/O Level: Analog Input Voltage: Single Power Supply: Power dissipation: Further Function: Package: 8 bits ±0.15% 40 MSPS (min.) TTL Compatible 3.0V to 5.0V(2Vp–p) 5.0V 350 mW (typ.) On Chip Reference Voltage Generator Standard 20-pin Plastic DIP Package: Suffix: –P Standard 20-pin Plastic Flat Package: Suffix: –PF s PACKAGES Plastic DIP, 20 pin Plastic FPT, 20 pin (DIP-20P-M01) (FPT-20P-M02) MB40558 s PIN ASSIGNMENT (TOP VIEW) GND D8 D7 D6 D5 D4 D3 D2 D1 CLK 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 GND VCCD VCC VRB VINA VRN VCC VCC GND GND 2 MB40558 s BLOCK DIAGRAM VCC 13 14 18 19 CLK 10 VINA 16 VCC R1 R 1 9 2 D1 (MSB) D2 D3 D4 D5 D6 D7 D8 (MSB) 8 7 R 127 R/2 VRM 15 R/2 128 255 to 8 ENCODER LATCH & BUFFER 6 5 4 3 R 254 2 R 255 R2 VRB 17 VCC x 0.6 1 11 12 20 Reference GND 3 MB40558 s ABSOLUTE MAXIMUM RATINGS Parameter Power supply voltage Digital input voltage Analog input voltage Storage temperature Symbol VCC VIND VINA Tstg Value –0.5 to +7.0 –0.5 to +7.0 –0.5 to VCC +0.5 –55 to +150 Unit V V V °C Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. s RECOMMENDED OPERATING CONDITIONS Parameter Power supply voltage Analog input voltage Digital high-level output current Digital low-level output current Clock pulse width at high-level Clock pulse width at low-level Operating temperature Symbol VCC VINA IOH IOL tW+ t W– Ta Value Min. 4.75 VRB –400 — 11.5 11.5 –20 Typ. 5.00 — — — — — — Max. 5.25 VCC — 1.6 — — 70 Unit V V µA mA ns ns °C 4 MB40558 s ELECTRICAL CHARACTERISTICS ANALOG DC CHARACTERISTICS (VCC = 5V ±5%, GND = 0V, Ta = –20 to +70°C) Value Unit Min. Typ. Max. — — — 0.18 — — — 0.6 × VCC –0.1 — 8 ±0.15 ±0.12 2.8 40 — — 0.6 × VCC 70* — ±0.3 — — — 195 185 0.6 × VCC +0.1 130 bits % % MΩ pF µA µA V mA Parameter Resolution Linearrity error Differential linearrity error Equivalent resistance for analog input Analog input capacitance Analog high-level input current Analog low-level input current Reference voltage Power supply current * : VCC = 5.0V, Ta = +25°C Symbol — LE DLE RINA CINA IIHA IILA VRB ICC DIGITAL DC CHARACTERISTICS (VCC = 5 V ±5%, GND = 0V, Ta = –20 to +70°C) Value Unit Min. Typ. Max. 2.7 — 2.0 — — –100 — — — — — — — 0.4 — 0.8 20 — V V V V µA µA Parameter High-level output voltage Low-level output voltage High-level input voltage Low-level input voltage High-level input current Low-level input current Symbol VOHD VOLD VIHD VILD IIHD IILD SWITCHING CHARACTERISTICS (VCC = 5 V ±5%, GND = 0V, Ta = –20 to +70°C) Value Unit Min. Typ. Max. 40 6 — 11 — 21 MSPS ns Parameter Maximum conversion rate Digital output delay time Symbol fS tpd 5 MB40558 s PACKAGE DIMENSIONS Plastic DIP, 20 pin (DIP-20P-M01) 24.64 –0.30 .970 +.008 –.012 +0.20 INDEX-1 INDEX-2 6.60±0.25 (.260±.010) 4.36(.172)MAX 0.51(.020)MIN 0.25±0.05 (.010±.002) 3.00(.118)MIN 0.46±0.08 (.018±.003) +0.30 +.012 –0 +0.30 +.012 –0 0.86 –0 .034 1.27(.050) MAX 1.27 –0 .050 2.54(.100) TYP 7.62(.300) TYP 15°MAX C 1994 FUJITSU LIMITED D20005S-3C-3 Dimensions in mm(inches) 6 MB40558 Plastic FPT, 20 pin (FPT-20P-M02) 12.70 –0.20 .500 –.008 +0.25 +.010 3.10(.122)MAX 0.05(.002)MIN (STAND OFF) 7.60±0.30 (.299±.012) 1 PIN INDEX 10.20±0.40 (.402±.016) 9.20±0.30 (.362±.012) 1.27(.050)TYP 0.45±0.10 (.018±.004) Ø0.13(.005) M 0.15 –0.02 +.002 .006 –.001 Details of "A" part 0.20(.008) +0.05 0.50±0.20 (.020±.008) 0.10(.004) 11.43(.450)REF "A" 0.60(.024) 0.18(.007)MAX 0.68(.027)MAX C 1994 FUJITSU LIMITED F20006S-4C-4 Dimensions in mm(inch) 7 MB40558 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3753 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED No. 51 Bras Basah Road, Plaza By The Park, #06-04 to #06-07 Singapore 189554 Tel: 336-1600 Fax: 336-1609 All Rights Reserved. Circuit diagrams utilizing Fujitsu products are included as a means of illustrating typical semiconductor applications. Complete information sufficient for construction purposes is not necessarily given. The information contained in this document has been carefully checked and is believed to be reliable. However, Fujitsu assumes no responsibility for inaccuracies. The information contained in this document does not convey any license under the copyrights, patent rights or trademarks claimed and owned by Fujitsu. Fujitsu reserves the right to change products or specifications without notice. No part of this publication may be copied or reproduced in any form or by any means, or transferred to any third party without prior written consent of Fujitsu. The information contained in this document are not intended for use with equipments which require extremely high reliability such as aerospace equipments, undersea repeaters, nuclear control systems or medical equipments for life support. F9608 © FUJITSU LIMITED Printed in Japan 8