MB95220

FS fact sheet Low-Pin-Count Microcontrollers MB95200, MB95300, and MB95400 Series 32 / 48 / 52 / 64 / 80 / 100 MB95310 MB95370 • LCD • EEPROM* MB95330 MB95390 • Timers • Motor Control • EEPROM* MB95430 • Ope Amp • Comparator • EEPROM* Pin Count MB95350 • I2C • EEPROM* MB95200 MB95210 MB95220 MB95260 MB95270 MB95280 • EEPROM* 1.8V - 3.6V 2.4V - 5.5V Fujitsu F2MC-8FX Low-Pin-Count Microcontrollers Description0 The Fujitsu F2MC-8FX low-pin-count series meets the growing demand for microcontrollers (MCUs) in small-scale, low-cost applications such as home appliances, electrical tools, consumer healthcare products and after-market car accessories. The MB95200, MB95300 and MB95400 families are generalpurpose, single-chip microcontrollers. In addition to a compact instruction set, these microcontrollers contain a variety of peripheral controls capable of enabling BLDC motor control or 120 degree DC inverter motor control applications, an LCD controller, a voltage comparator and operation amplifier. Flexible and highly functional, the devices can be used for system control and sub-micro control. For example, if I/O ports or A/D converters in the main microcontroller are insufficient due to system specification changes, the Fujitsu low-pin-count microcontrollers can support these functions as a sub-microcontroller. Or if the standby current of the main microcontroller is too large, the MCUs can manage the power supply. The MB95200, MB95300 and MB95400 family devices feature high-performance, low-voltage, embedded flash; a precision on-chip RC oscillator; and an on-chip debug feature. The dual-operation flash memory supports a boot-loader implementation. The flash memory also supports a cost-effective emulation of an on-chip EEPROM by simultaneously executing the program code while writing or erasing data from one of the flash sectors. The Fujitsu MB95300 series also contains built-in hardware, including a multi-pulse generator (MPG), which can be used for the multi-channel DC motor control, BLDC motor control and 120 degree DC inverter motor control operation; and an LCD controller, which can operate 190pix or 128pix size. The MB95400 series contains a built-in voltage comparator and operational amplifier. The Fujitsu low-pin-count MCUs are easy to use and provide an optimal environment at each stage of the process from program development to writing to flash memory. The BGM adapter in-circuit emulator can be used for debugging and flash programming. *EEPROM emulation using ash 8 / 16 / 20 / 24 / 28 Key Features0 High Quality and Reliability • 100K write/erase cycles • 20-year data retention • 40°C to 85°C operating range On-chip Peripherals • Support for up to 160 pixel segmented LCD • Multi-Pulse Generator (MPG) • 8/16-bit PPG • Waveform sequencer (including a 16-bit timer) equipped with a buffer and compare clear function) • Communication interfaces: I2C, LIN-UART, SPI Safety and Security • Flash content protection • Low Voltage Detect (LVD) reset • Clock supervisor • Hardware watchdog timer Ease of Use • +/-2% on-chip RC oscillator • On-chip debug • Single-wire debug interface • Low-cost development environment • Free download of IDE (SOFTUNE™) from the web • EEPROM software, motor control and other peripheral libraries Dual-Operation Flash • Dual-bank operation • Memory for program and data storage • Enables EEPROM emulation Applications0 120° DC Inverter Air-Conditoner MB95F330/390 I/O PORT Inverter Washing Machine Valve A MB95F330/390 I/O PORT Valve A Water in UART/SPI/CAN Valve Drivers Valve B Valve C Low-Pin-Count MCU Temperature sensors Current sensors Pressure sensors Low-Pin-Count MCU Key Input LED-displaying Control Units Interface Transceiver Key Input LED-displaying Control Units Interface Transceiver UART/SPI/CAN Valve Drivers Valve B Water out Valve C Water Heater 10-BIT / 12-BIT ADC Temperature sensors Current sensors 10-BIT ADC MULTI-FUNCTION TIMER EXT INT MULTI-PULSE GENERATOR Inverter Driver Inverter Driver Inverter Driver DUAL FLASH EE EMULATION MULTI-PULSE GENERATOR Position Resolver DUAL FLASH EE EMULATION Position Resolver Product Line-up0 MB95200 F MC-8FX (8-bit CISC CPU) 2   MB95210 MB95220 MB95260 MB95270 MB95280 MB95310 MB95330 MB95350 MB95370 MB95390 MB95430 CPU core 16.25MHz Up to 16MHz (max) Typ: 100kHz, min: 50kHz, max: 200kHz Flash memory – Yes Modes: stop, sleep, watch, time base timer Yes 17 2ch 1ch 1ch 2ch 1ch 1ch 2ch 2ch 5 13 17 5 13 71 29 Yes Yes Yes Yes Yes Yes Yes Yes 21 2ch Yes 55 2ch Yes 45 2ch Yes Yes Yes Yes Yes Yes Yes Yes – – Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes CPU Max. operating frequency Internal CR oscillator Main clock Sub clock Memory type Dual operation flash / EEPROM Yes Yes Clock supervisor Low-power consumption mode Low-voltage detection circuit Yes 29 1ch Maximum number of I/O ports Composite timer – – – – – – 2ch Selectable from 8-bit or 10-bit resolution Built in PWC (Pulse Width Counter), PWM (Pulse Width Modulation), input capture function 3ch – 2ch 3ch 1ch 8/16bit PPG timer 1ch / – – 6ch 6ch 2.4V – 5.5V 2ch 6ch 6ch 2ch 2ch 5ch 6ch 2ch – – – – – 5ch 6ch – 1ch / – 1ch / – – 1ch / – Watchdog timer Hardware/software watchdog timer 2ch / 1ch 1ch 4ch 8ch 1.8V – 3.6V –40oC to +85oC 1ch / 1ch 1ch 8ch 10ch 2.4V – 5.5V 1ch / 1ch 1ch 6ch 6ch 1.8V – 3.6V 2ch / – 1ch 4ch 8ch 1.8V – 3.6V 1ch / 1ch 1ch 12ch 8ch 2.4V – 5.5V 1ch / – 1ch 8ch 8ch 2.4V – 5.5V LIN-UART/UART IC 2 A/D converter Selectable from 8-bit or 10-bit resolution External interrupts Operating voltage Guaranteed operating temperature SOP 20 SDIP 24 SOP 8 DIP 8 – – – – – – – – – – – – DIP 16 SOP 16 SOP 20 SDIP 24 TSSOP 20 QFN 32 – – – – SOP 8 DIP 8 – – – – Package DIP 16 SOP 16 QFN 32 – – – – LQFP 80 160 pix. – – – LQFP 32 QFN 32 SDIP 32 – 1ch – – SOP 24 TSSOP 24 QFN 32 – – – – LQFP 64 128 pix. – – – LQFP 48 QFN 32   1ch     LQFP 32 SDIP 32 – – 4ch 1ch LCDC operation Motor control Voltage comparator Operational amplifier Yes = Available – = Not available Low-Pin-Count Microcontrollers MB95200, MB95300 and MB95400 Series Development Kit0 Emulator Overview • Low cost • Small size (about 100mm x 70mm) • USB interface to PC to run or debug SOFTUNE™ Starter Kit / Evaluation Board Part Numbers • MB2146-410A-01-E: MB95200 series • MB2146-420A-01-E: MB95260 series with EEPROM emulation • MB2146-440-E: MB95330 series with motor control • MB2146-441-E: MB95390 series with motor control • MB2146-450-E: MB95310 series with LCDC • MB2146-451-E: MB95370 series with LCDC • MB2146-460-E: MB95350 series with I2C host and slave communication • FMCDC-MB95260H-EK-01: MB95260 series with EEPROM emulation Starter Kit Overview Features • Bundled with starter kit for emulator adapter, SOFTUNE™ • User can evaluate the MB95200 and MB95300 MCUs and its peripherals based on starter kit board and sample codes SOFTUNE™ Debug System Platform • Free Internet IDE download • No size or time restriction on compiler IDE usage • IDE is bundled with C-compiler, assembler, linker, simulator, emulator, and monitor debugger Product Number Guide0 Part # MB95F202 MB95F212 MB95F222 MB95F262 MB95F272 MB95F282 MB95F332 MB95F352 MB95F203 MB95F213 MB95F223 MB95F263 MB95F273 MB95F283 MB95F333 MB95F353 MB95F204 MB95F214 MB95F264 MB95F274 MB95F284 MB95F314 MB95F374 MB95F354 MB95F394 MB95F434 20 496 MB95F334 MB95F316 MB95F376 MB95F396 MB95F318 MB95F378 MB95F398 ROM (KB) RAM (bytes) 4 240 8 240 8 496 12 496 16 496 20 1008 36 1008 60 2032 8 FUjITSU SEMICONDUCTOR AMERICA, INC. Corporate Headquarters 1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401 Tel: (800) 866-8608 Fax: (408) 737-5999 E-mail: FSA_inquiry@us.fujitsu.com | Website: http://us.fujitsu.com/semi 2011 Fujitsu Semiconductor America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Printed in the U.S.A. MCU-FS-21376-06/2011 ©