RY5W-K

FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2A (for signal switching) RY Series n FEATURES Ultra high sensitivity UL, CSA recognized (see note 2) l Conforms to FCC rules and regulations Part 68 - Surge strength 1,500 V l High dielectric strength type available (RY-WF type) l Contact arrangement MBB type available (RY-D type) l High reliability-bifurcated contacts l Wide operating range l DIL terminals l Plastic sealed type, cat III l RoHS compliant. Please see page 9 for more information l l n PARTNUMBER INFORMATION [Example] (a) RY - 12 (a) (*) (b) WF (c) - K (d) Relay type RY : RY-Series Coil rated voltage 012 : 3.....48 VDC Coil rating table at page 3 (c) Coil and contact type W WZ WF WFZ D : High sensitive type : Nominal 0.5W type : High dielectric strength type : 2A type : 2 form D (2 MMB type) (d) Enclosure K : Plastic sealed type (b) Note 1: Actual marking omits the hyphen (-) of (*) For movable and stationary contact with gold overlay type, add suffix “–OH”. Note 2: Standard relay does not bear the UL/CSA marking. In case UL/CSA certification is necessary, add -UL to the ordering partnumber. 1 FTR-K1RY SERIES SERIES n SPECIFICATION Item Contact Data Life Coil Data High sensitive type 500 mW type High dielectric strength 2 A type Continous (MBB)type RY-( )W-K RY-( )WZ-K RY-( )WF-K RY-( )WFZ-K RY-( )D-K Configuration 2 form C (DPDT) 2 form D (2 MBB) Construction Bifurcated (cross bar) Single Material Gold overlay silver-palladium Resistance (initial) Max. 100 mΩ at 6 VDC, 1A Contact rating 1A, 24VDC 0.5A, 120VAC Max. carrying current Gold overlay silver-nickel Gold overlay silverpalladium 2A, 30VDC 0.5A,125VAC 0.15A, 48VDC 0.3A, 120VAC 1.25A 2A 0.6A Max. switching voltage 120VAC, 60VDC 125VAC, 150VDC 120VAC, 60VDC Max. switching power 60VA / 24W 62.5VA /60W 36VA / 7.2W Max. switching current 1A Min. switching load * 0.01 mA, 10 mVDC Capacitance (at 10MHz) Approximately 0.9 pF (open contacts), 1.4pF (adjacent contacts) Approximately 1.9 pF (between coil and contacts) Mechanical Min. 20 x 106 operations Electrical (at contact rating) Min. 500x103 Min. 200 x 103 operations (0.5A, operations 120VAC) (0.25A, 3 Min. 500 x 10 operations 120VAC) (1A, 24VDC) (1A, 4VDC) Min. 100x103 operations (2A, 30VDC) Min.200x103 ops. (0.3A, 120VAC) Min.500x103 ops. (0.15A, 48VDC) Rated power 150 - 300mW 500 - 580mW 450 - 460mW 500 - 580mW 450 - 480mW Operate power 75 -140mW 125 - 145mW 200 - 210mW 200 - 324mW 200 - 210mW Operating temperature range (no frost) -30 °C to +90 °C (+80 °C for 48VDC type) -30 °C to +60 °C 1A, 24VDC 0.25A,120VAC 30VA / 24W 0.1 mA, 10 mVDC Min. 1 x 106 operations Min. 10 x 106 operations -30 °C to +70 °C (+65 °C for 48VDC type) * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1RY SERIES SERIES SPECIFICATION (CONTINUED) n Item Timing Data Insulation High dielectric strength 2 A type Continous (MBB)type RY-( )W-K RY-( )WZ-K RY-( )WF-K RY-( )WFZ-K RY-( )D-K 1,000VAC, 1min. 500VAC, 1min Max. 6 ms Release (at nominal voltage) Max. 3 ms Resistance (initial) Min. 1,000MΩ at 500VDC Surge strength Vibration resistance Shock resistance n 500 mW type Operate (at nominal voltage) Dielectric strength Other High sensitive type Open contacts 500VAC, 1min Contacts to coil/ adjacent contacts 1,000VAC 1min Coil to contacts 1,500V / 10 x 160µs standard wave Misoperation 10 to 55Hz double amplitude 1.5 mm Endurance 10 to 55Hz double amplitude 4.5 mm Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Weight Approximately 5 g Sealing Sealed cat. RTIII COIL RATING High sensitive type (RY-xxW-K) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 3 3 60 2.1 0.15 4.5 4.5 135 3.2 0.23 5 5 165 3.6 0.25 6 6 240 4.3 0.3 9 9 540 6.4 0.45 12 12 960 8.5 0.6 18 18 1,620 12.6 0.9 24 24 2,880 16.8 1.2 48 48 7,680 32.6 2.4 Rated Power (mW) 150 200 300 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. 3 FTR-K1RY SERIES SERIES 500 mW type (RY-xxWZ-K) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * Rated Power (mW) 3 3 18 1.5 0.15 500 4.5 4.5 36 2.25 0.23 5 5 45 2.5 0.25 6 6 66 3 0.3 550 9 9 140 4.5 0.45 580 12 12 280 6 0.6 510 18 18 560 9 0.9 580 24 24 1,070 12 1.2 540 48 48 4,000 24 2.4 580 Rated Power (mW) 560 High dielectric type (RY-xxWF-K) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 5 5 56 3.3 0.25 6 6 80 4 0.3 9 9 180 6 0.45 12 12 320 8 0.6 18 18 720 12 0.9 24 24 1,260 15.9 1.2 48 48 5,000 33 2.4 460 450 2A type (RY-xxWFZ-K) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * Rated Power (mW) 3 3 18 1.9 0.15 500 4.5 4.5 36 2.9 0.23 5 5 45 3.2 0.25 560 6 6 66 3.8 0.3 550 9 9 140 5.7 0.45 580 12 12 280 7.6 0.6 510 18 18 560 11.4 0.9 580 24 24 1,070 15.2 1.2 540 48 48 4,000 36 2.4 580 Note: All values in the tables are measured at 20°C and zero contact current. * Specified values are measured with pulse wave voltage 4 FTR-K1RY SERIES SERIES MBB type (RY-xxD-K) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 4.5 4.5 45 3 0.23 5 5 55 3.3 0.25 6 6 80 3.95 0.3 9 9 180 5.9 0.45 12 12 320 7.9 0.6 18 18 720 11.8 0.9 24 24 1,280 15.8 1.2 48 48 4,800 31.8 2.4 Rated Power (mW) 450 480 Note: All values in the table are measured at 20°C and zero contact current. * Specified values are measured with pulse wave voltage n SAFETY STANDARDS * Type Compliance Contact rating UL UL 478, UL 508 Flammability: UL 94-V0 (plastics) E 45026 CSA C22.2 No. 14 LR 35579 [RY-W, RY-WZ] 0.5A, 120VAC (resistive) 1A, 24VDC (resistive) 0.3A, 60VDC (resistive) 2A, 30VDC, (resistive) [RY-WF] 0,5A,120VAC (resistive)(UL) 0.25A, 120VAC (resistive)(CSA) 1A, 24VDC (resistive) 0.3A, 60VDC (resistive) 2A, 30VDC (resistive) [RY-D] 0.3A, 120VAC (resistive) 0.2A, 60VDC (resistive) [RY-WFZ] 0.5A, 125VAC (resistive) 2A, 30VDC (resistive) 0.6A, 110VDC (resistive) * Note: for UL/CSA certified relays; UL/CSA marking, add -UL to the ordering partnumber 5 FTR-K1RY SERIES SERIES n CHARACTERISTIC DATA 6 FTR-K1RY SERIES SERIES 7 FTR-K1RY SERIES SERIES n l DIMENSIONS Dimensions l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm 8 FTR-K1RY SERIES SERIES RoHS Compliance and Lead Free Information 1. General Information All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives. As per Annex III of directive 2011/65/EU. l All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. l 2. Recommended Lead Free Solder Condition l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder Condition: Pre-heating: maximum 120˚C within 90 sec. Soldering: dip within 5 sec. at 255˚C ± 5˚C solder bath Relay must be cooled by air immediately after soldering Solder by Soldering Iron: Soldering Iron 30-60W Temperature: maximum 350-360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 9 FTR-K1RY SERIES SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2014 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 04, 2014 10