SJ-12D01

厂商：
FUJITSU(富士通)
封装：
描述：
SJ-12D01 - SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A - Fujitsu Component Limited.

数据手册：

下载SJ-12D01.pdf

立即购买

详情介绍
数据手册
价格&库存

SJ-12D01 数据手册

SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES n FEATURES l l RoHS compliant UL, CSA recognized Extremely small and light weight —Size: 10.0 (W) × 20.2 (L) × 12.8 (H) mm —Weight: approximately 5.5g l High reliability, long life and maintenance free l High isolation (between input and output) —Dielectric stength: 2,500 Vrms l Compatible with JY Relay in size and terminal arrangement l RoHS compliant since date code: 6703 (July 3rd, 2006) Please see page 6 for more information [Example] (a) (b) (c) (d) (e) (g) (f) n ORDERING INFORMATION SJ – 12 D 01 HZ R N (a) (b) (c) (d) (e) (f) (g) SJ : SJ Series 3: 3 VDC (only AC type) 5: 5 VDC 12: 12 VDC 24: 24 VDC A: AC type D: DC type 01: 1 A : Diode : Zener diode type Series Name Nominal Voltage (Input side) Load Voltage Load Current Kinds of Inverse Connection Protecting Element (only DC type) Terminal Classification Output Polarity (DC Type) Nil HZ Nil: Socket mounting N : PC Board mounting type Nil: Standard Polarity R: Reverse Polarity 1 SJ SERIES n SPECIFICATIONS Item AC TYPE 1A ± 20% of nominal voltage 80% of nominal voltage Minimum1 V (minimum 0.5 V*) 120Ω ±10% — 360Ω ±10% 430Ω ±10% 1.0 kΩ ±10% 1.2 kΩ ±10% 2.0 kΩ ±10% 2.4 kΩ ±10% 24 to 265 Vrms 3 to 30 VDC 1.0 Arms 1.0 A 1 mA 10 mArms see CHARACTERISTIC DATA *3 VDC type DC TYPE 1A Remarks INPUT side Nominal Voltage (DC) Operate Range Must Operate Voltage Must Release Voltage 3 V, 5 V, 12 V, 24 V 5 V, 12 V, 24 V 3 VDC Type 5 VDC Type Input Impedance 12 VDC Type 24 VDC Type OUTPUT side Load Voltage Range Maximum Load Current Minimum Load Current 1 Cycle Surge Current 50 A (60 Hz) 3 A (10 ms) 0.75 mArms (at 100 Vrms 60Hz) 0.1 mA (at 30 VDC) 1.50 mArms (at 200 Vrms 60Hz) 1.2 Vrms 1 ms 1/2 cycle + 1 ms –30°C to + 85°C –40°C to + 100°C Black Green Approximately 5.5 g 1 ms 1.2 V at max. load current Max. Off-state Leakage Current Max. Off-state Voltage Drop Max. Operate Time Max. Release Time Operating Temperature Range Storage Temperature Range Case Color Weight n INSULATION Item Resistance (initial) Surge Voltage Type UL Compliance AC 2,500V rms 1 min. Contact rating DC Note Input - Output Minimum 1,000 MΩ (500VDC) n SAFETY STANDARD AND FILE NUMBERS UL 478, UL 508 E 45026 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [SJ-C ( ) A01] 1A, 265VAC (resistive) [SJ-( ) D01] 1A, 30VDC (resistive) 2 SJ SERIES n BLOCK DIAGRAM LOAD 8+ Input terminal 9Ð INSULATIONCIRCUITS Photo-triac coupler Input circuit ~16 Snubber circuit Varistor Input/Output waveform (resistive load) Source voltage of load Input signal ON OFF Load current AC Photo-triac coupler Trigger circuit Output terminal ~13 +16 Output terminal Ð13 Drive circuit Input terminal 9Ð Input circuit Inverse connection protecting diode Output transistor DC Photo-transistor coupler 8+ Photo-transistor coupler Input signal Load current ON OFF n CHARACTERISTIC DATA n REFERENCE DATA 3 SJ SERIES n DIMENSIONS l Dimensions SJ-( )A Type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm 4 SJ SERIES l Dimensions SJ-( )D type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) SJ-( )AN type SJ-( )DN type Unit: mm n SOCKET DIMENSIONS n NOTES 1. Polarity of terminals are pre-determined. Please design your circuit accordingly. 2. Socket ordering code: JK-4N 3. Standard IC socket is not recommended. Please use socket “JK-4N” Unit: mm 5 SJ SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 SJ SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008. 7

下载 PDF

SJ-12D01

### 物料型号 - Series Name: SJ Series - Nominal Voltage: 3VDC, 5VDC, 12VDC, 24VDC（AC类型）；5VDC, 12VDC, 24VDC（DC类型） - Load Current: 1 A

### 器件简介 - FEATURES: - 非常小且轻量，尺寸为10.0(W) × 20.2(L) × 12.8(H) mm，重量约为5.5g。 - 高可靠性、长寿命且免维护。 - 高隔离度（输入与输出之间），介电强度为2,500 Vrms。 - 与JY继电器在尺寸和端子排列上兼容。

### 引脚分配 - Terminal Classification: - Nil: 插座安装 - N: 印刷电路板安装类型 - Output Polarity: - Nil: 标准极性 - R: 反向极性

### 参数特性 - INPUT side: - Operate Range: 额定电压的+20%。 - Must Operate Voltage: 额定电压的80%。 - Input Impedance: 根据不同的电压类型，阻抗值不同，例如3VDC类型为120 ±10%，24VDC类型为2.0 kΩ+10%。 - OUTPUT side: - Load Voltage Range: 24到265 Vrms（AC类型），3到30 VDC（DC类型）。 - Maximum Load Current: 1.0 A。 - Minimum Load Current: 10 mA（AC类型），1 mA（DC类型）。

### 功能详解 - BLOCK DIAGRAM: 包含光敏三极管耦合器、光敏晶闸管耦合器、驱动电路、触发电路、输出晶体管、抑制电路、反向连接保护等。

### 应用信息 - RoHS Compliance: 自2006年7月3日（日期代码6703）起，产品符合RoHS标准。 - Safety Standard and File Numbers: 符合UL和CSA标准。

### 封装信息 - Dimensions: 提供了SJ系列的尺寸图，包括SJ-( )A型和SJ-( )D型的尺寸。 - Socket Dimensions: 提供了插座的尺寸信息，推荐使用“JK-4N”插座。

SJ-12D01 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“SJ-12D01”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

SJ-12D01

相关技术文章