SN-D12B

SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES n FEATURES l RoHS compliant I/O modules for interface between CPU and external input devices or loads l Ultra slim and light weight, SIL terminals type I/O modules for high density mounting Size: 5 (W) × 20 (L) × 17 (H) mm — Weight: approximately 3.0 to 3.5 g — l High isolation by employing photo-coupled devices (between input and output: 2,500 V rms) l Long life and maintenance free l All solid state I/O module l Compatible with NY relay size and terminals arrangement (only output module type) l RoHS compliant since date code: 6703 (except 204-207) Please see page 9 for more information n ORDERING INFORMATION l Input module SN – A 100 BF [Example] (a) (b) (c) (a) (b) (c) Series Name Input Voltage SN : SN Series A: AC type D: DC type 100 BF: 100 VAC 200 BF: 200 VAC 12/24 B: 12/24 VDC Nominal Voltage 1 SN SERIES l Output module SN – 12 D 01 HZ – C R T [Example] (a) (b) (c) (d) (e) ( f ) (g) (h) (a) (b) (c) (d) (e) ( f ) ( g) ( h) Series Name Nominal Voltage (Input side) Load Voltage SN : SN Series 3: 3 VDC (only AC type) 5: 5 VDC 12: 12 VDC 24: 24 VDC A: AC type D: DC type 01 : 1 A AC type Nil : with varistor NV: without varistor DC type Nil : Diode HZ: Zener diode F : without zero cross function C : with zero cross function Nil : Standard polarity R : Reverse polarity Nil : Standard T : High speed type Load Current Kinds of Inverse Connection Protecting Element Zero Cross function (AC type) Output Polarity (DC type) Switching Speed (DC type) n SPECIFICATIONS • INPUT MODULE (SN-( ) B Type) Item AC Input Module 100 VAC type INPUT side Input voltage range Rating input current Power frequency range Must operate voltage (max.) Must release voltage (max.) Must release current (max.) OUTPUT DC supply voltage (VDD) side Max. output current (VDD=5V) Output logic Maximum operate time (max.) Maximum release time (max.) Insulation resistance (initial value) Dielectric strength Operating temperature range (no frost) Storage temperature range (no frost) Case color Weight 80 to 132 Vrms 200 VAC type 160to 265 Vrms DC Input module 12/24 VDC type 9.6 to 28.8 VDC Approx. 5 mA at Approx. 10 mA at 12 VDC 24 VDC 160 Vrms 60 Vrms 9.6 VDC 5.0 VDC 1.5 mA ±0.4 mA 10ms 10ms - Approximately 7 mArms 47 to 63 Hz 80 Vrms 30 Vrms 2 mArms 4 to 6 VDC ±4 mA 25 ms 30 ms Operate with negative true logic (active flow) Minimum 1,000 MΩ (at 500VDC) (for input-output) 2,500 Vrms 1 minute (for input-output) -30ºC to +85ºC -40ºC to +100ºC Yellow Approximately 2.0 g White Approximately 3.3 g 2 SN SERIES • OUTPUT MODULE Standard Type INPUT side OUTPUT side Item Remarks Nominal Voltage (DC) Operate Voltage Range Must Operate Voltage Must Release Voltage 3 VDC Type 5 VDC Type Input Impedance (±10%) 12 VDC Type 24 VDC Type Load Voltage Range Maximum Load Current Minimum Load Current Switching Current AC Output module with zero without zero cross cross DC Output module 3 V, 5 V, 12 V, 24 V 5 V, 12 V, 24 V ± 20% of nominal voltage m ax.80% of nominal voltage Minimum 1 VDC (minimum 0.5 V*) 130 Ω 180 Ω — 330 Ω 470 Ω 390 Ω 1,0k Ω 1,5k Ω 1,2k Ω 2,2k Ω 3,0k Ω 2.4k Ω *3 VDC type 24 to 265 Vrms 3 to 30 VDC 1.0 Arms 1.0 A 1 mA see CHARACTERISTIC DATA 10 mArms 50 A (60 Hz) 3 A (10 ms) 1.5 mArms (at 100 Vrms 60 Hz) 0.1 mA (at 30 VDC) 3.0 mArms (at 200 Vrms 60 Hz) 1.2 Vrms 1 ms 1.2 V at max. load current 1/2 cycle ±1 ms 1 ms 1 ms Max. Off-State Leakage Current Max. On-State Voltage Drop Maximum Operate Time (max.) Maximum Release Time Insulation Resistance Dielectric Strength Operating Temperature Range Storage Temperature Range Case Color Weight 1/2 cycle + 1ms Minimum 1,000 M Ω (at 500 VDC) for input-output 2,500 Vrms 1 minute –30°C to + 85°C –40°C to +100°C Black Red no frost Approximately 3.5 g Approximately 2.9 g 3 SN SERIES • OUTPUT MODULE High Speed Switching Type INPUT side OUTPUT side Item Nominal Voltage (DC) Operate Voltage Range Must Operate Voltage Must Release Voltage 5 VDC Type Input Impedance 12 VDC Type 24 VDC Type Load Voltage Maximum Load Current Minimum Load Current Switching Current AC Output module 5 V, 12 V, 24 V ± 20% of nominal voltage 80% of nominal voltage Minimum 1 V 330 Ω ±10% 1,0 k Ω ±10% 2,0 k Ω ±10% DC3 to 30V 1.0 A 1 mA see CHARACTERISTIC DATA Remarks 3 A (10 ms) at max. load current at DC 5 V 0.1A Max. Off-State Leakage Current 0.1 mA (at 30 VDC) Max. On-State Voltage Drop 1.2 V max. 5 µs max. 25 µs Maximum Operate Time Maximum Release Time Insulation Resistance Dielectric Strength Operating Temperature Range Storage Temperature Range Case Color Weight Minimum 1,000 M Ω (at 500 VDC) for input-output 2,500 V rms 1 minute –40°C to + 100°C –30°C to + 85°C Red Approximately 2.9 g n INSULATION Item Resistance (initial) Surge Voltage Input module 2,500V rms 1 min. Output module Note Input-output Minimum 1,000 MΩ (500VDC) 4 SN SERIES n BLOCK DIAGRAM • INPUT MODULE LOAD 1(~) Input terminal 2(~) 1 (+/–) Input terminal 2 (+/–) AC Imput Circuit Condenser Input INSULATION CIRCUITS Photo-transistor coupler Buffer Circuit Photo-transistor coupler Input Circuit Buffer Circuit 3 V DD Input/Output waveform (resistive load) Output 4 OUT terminal 5 GND 3 V DD Photo-transistor coupler Input signal ON ( ) DC Logic output Photo-transistor coupler OFF Output signal “H” “L” Input signal Output signal “H” “L” ON OFF Output 4 OUT terminal 5 GND • OUTPUT MODULE LOAD 3+ Input terminal 4– 3+ Photo-transistor coupler Input circuit INSULATIONCIRCUITS Photo-triac coupler Input circuit Input/Output waveform (resistive load) ~1 Varistor Snubber circuit AC Trigger circuit Photo-triac coupler Output terminal ~2 +1 Output terminal –2 Source voltage of load Input signal ON OFF Load current Drive circuit Inverse connection protecting diode DC Photo-transistor coupler Input terminal 4– Output transistor Input signal Load current ON OFF * AC type without varistor / DC type with zenor diode available. n CHARACTERISTIC DATA • OUTPUT MODULE 5 SN SERIES n REFERENCE DATA l INPUT MODULE Distribution of Operate & Release Voltage (AC Type) High temperature Switching Test (AC Type) High temperature Continuous Operating Test (AC Type) l OUTPUT MODULE Distribution of Operate & Release Voltage (AC Type) Distribution of Operate & Release Voltage (DC Type) Distribution of On-State Voltage Drop (AC Type) 6 SN SERIES n DIMENSIONS l Dimensions SN-A ( ) type (input module) l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) SN-D ( ) type (input module) SN-A ( ) type (output module) Dotted line : Socket mounting SN-( )A-S type SN-( ) D, ( )D ( ) R type (output module) * Reverse polarity type available Dotted line : Socket mounting SN-( )D-S type Unit: mm 7 SN SERIES n Socket Dimensions n Socket PC board mounting hole layout Unit: mm n NOTES 1. Polarity of terminals is pre-determined. Please design your circuit accordingly. 2. Socket ordering code: JL-5N 3. Standard IC socket is not recommended. Please use socket “JL-5N”. 4. When switching inductive load by AC output module without varistor, please connect a varistor as shown in drawing below. 5. AC input module has inside logic IC. Please connect bypass condenser (approx. 0.01µ) at pivotal points between VDD and GND. (Conform to general handling instructions for logic IC.) 8 SN SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 9 SN SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008. 10