UM1L-D12W-K

UM1 SERIES MINIATURE RELAY 1 POLE, 0.5A (HIGH FREQUENCE SIGNAL SWITCHING) UM1 SERIES n l l RoHS Compliant l l l l l l Subminiature polarized relay Excellent high frequency characteristics at 900 MHz —Isolation : min. 60 dB (Impedance of —Insertion loss : max.  dB the measuring —V.S.W.R. : max. .2 devices is 75Ω) High reliability — Bifurcated contacts — Movable contact: gold overlay — Stationary contact: gold clad Wide operating range DIL pitch terminals Plastic sealed type Latching type available RoHS compliant since date code: 0437T2 Please see page 7 for more information FEATURES } n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f ) UM L (a) (b) Series Name Operation Function Number of Coil Nominal Voltage Contact Enclosure TO – D (c) BE M 2 W (d) (e) IN ED EU IN 9 NT 00 O2 SC CH DI AR – K (f ) UM : UM Series Nil : Standard type L : Latching type Nil : Single winding type D : Double winding type Refer to the COIL DATA CHART W : Bifurcated type (cross bar) K : Plastic sealed type  UM1 SERIES n SPECIFICATIONS Item Contact Arrangement Material Style Resistance (initial) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load* Excellent High Frequency Characteristics Coil Isolation V.S.W.R. Insertion Loss  Standard Type UM1-( ) W-K  form C (SPDT) Single Winding Latching Type UM1L-( ) W-K Double Winding Latching Type UM1L-D ( ) W-K Gold clad (stationary contact), gold plate (movable contact) Bifurcated (cross bar) Maximum 00 mΩ 0 mA 24 VDC  W (at 900 MHz) 0.5 A  W (DC) 0 W (at 900 MHz) 30 VDC 00 mA 0.0 mA 0 mVDC Minimum 60 dB (at 900 MHz), impedance of the measuring devices is 75Ω Maximum  dB (at 900 MHz), impedance of the measuring devices is 75Ω Maximum .2 (at 900 MHz), impedance of the measuring devices is 75Ω 200 to 220 mW 00 to 0 mW –30°C to +80°C (no frost) Maximum 6 ms 06 200 mW 00 mW Maximum 6 ms (set) 400 mW 200 mW –30°C to +60°C (no frost) Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature TO Misoperation Misoperation BE IN ED EU IN 9 NT 00 O2 SC CH DI AR Time Value Life Other Operate (at nominal voltage) Mechanical Electrical Vibration Shock Weight Resistance Endurance Resistance Endurance Release (at nominal voltage) M × 3× Maximum 5 ms 05 Maximum 6 ms (reset) operations minimum operations minimum (at nominal load) 0 to 55 Hz (double amplitude of 3.3 mm) 0 to 55 Hz (double amplitude of 5.0 mm) ,000 m/s2 ( 6 ± ms) 500 m/s2 ( ± ms) Approximately 4 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item Isolation (initial) Dielectric Strength Standard Single latch Double latch Minimum 1,000 MΩ (at 500VDC) 500VAC  min., (open contact / contact and shield terminals) ,000VAC  min., (coil contact/ coil and shield terminals) 2 UM1 SERIES n COIL DATA CHART MODEL UM- .5 W-K UMStandard Type UMUMUM3 W-K 5 W-K 6 W-K 9 W-K UM- 4.5 W-K Nominal voltage .5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 2 VDC 8 VDC 24 VDC 48 VDC Coil resistance (±10%) .2Ω 45 Ω 0 Ω 25 Ω 80 Ω 405 Ω 720 Ω ,620 Ω 2,880 Ω 0,472 Ω Must operate voltage*1 +.05 VDC +2. VDC +3.5 VDC +3.5 VDC +4.2 VDC +6.3 VDC +8.4 VDC +2.6 VDC +6.8 VDC +33.6 VDC Must release voltage*1 +0.08 VDC +0.5 VDC +0.23 VDC +0.25 VDC +0.3 VDC +0.45 VDC +0.6 VDC +0.9 VDC +.2 VDC +2.4 VDC Nominal power 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 220 mW UM- 2 W-K UM- 8 W-K UM- 24 W-K UM- 48 W-K Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. TO BE IN ED EU IN 9 NT 00 O2 SC CH DI AR 3 M UM1 SERIES MODEL UML- .5 W-K Single Winding Latching Type UMLUMLUMLUML3 W-K 5 W-K 6 W-K 9 W-K UML- 4.5 W-K Nominal voltage .5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 2 VDC 8 VDC 24 VDC 48 VDC .5 VDC Coil resistance (±10%) .2Ω 45 Ω 0 Ω 25 Ω 80 Ω 405 Ω 720 Ω ,620 Ω 2,880 Ω ,520 Ω P S P S S S P 5.6Ω 5.6Ω 22.5Ω 22.5Ω 50.6Ω 50.6Ω 62.5Ω 90 Ω Set voltage*1 +.05 VDC +2. VDC +3.5 VDC +3.5 VDC +4.2 VDC +6.3 VDC +8.4 VDC +2.6 VDC +6.8 VDC +33.6 VDC +.05 VDC Reset voltage*1 -.05 VDC -2. VDC -3.5 VDC -3.5 VDC -4.2 VDC -6.3 VDC -8.4 VDC -2.6 VDC -6.8 VDC -33.6 VDC +.05 VDC Nominal power 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 400 mW 400 mW UML- 2 W-K UML- 8 W-K UML- 24 W-K UML- 48 W-K UML-D.5 W-K UML-D 3 W-K UML-D4.5 W-K TO 3 VDC 4.5 VDC +2. VDC +2. VDC +3.5 VDC +3.5 VDC +3.5 VDC BE 400 mW 400 mW 400 mW 400 mW 400 mW 400 mW 400 mW 400 mW Double Winding Latching Type IN 5 VDC 6 VDC 9 VDC 2 VDC 8 VDC 24 VDC 48 VDC UML-D 5 W-K UML-D 6 W-K UML-D 9 W-K UML-D 2 W-K UML-D 8 W-K UML-D 24 W-K UML-D 48 W-K P P Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. ED EU IN 9 NT 00 O2 SC CH DI AR 62.5Ω +3.5 VDC +4.2 VDC S 90 Ω +4.2 VDC P 202.5Ω +6.3 VDC S 202.5Ω 360 Ω 80 Ω +6.3 VDC P 360 Ω +8.4 VDC S S +8.4 VDC P 80 Ω +2.6 VDC +2.6 VDC P ,440 Ω P 5,760 Ω +6.8 VDC +33.6 VDC S ,440 Ω S 5,760 Ω +6.8 VDC +33.6 VDC M P: Primary coil S: Secondary coil 4 UM1 SERIES n CHARACTERISTIC DATA n REFERENCE DATA TO BE IN ED EU IN 9 NT 00 O2 SC CH DI AR 5 M UM1 SERIES TO BE IN ED EU IN 9 NT 00 O2 SC CH DI AR PC board mounting hole layout (Bottom view) n DIMENSIONS l Schematics (Bottom view) UM, UML type (Non-latching type, single winding latching type) l Dimensions l UML-D type (Double winding latching type) M Unit: mm 6 UM1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information l l l l l Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays. All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials above the threshold level that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE and DecaBDE). It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). “LF” is marked on each outer and inner carton. (No marking on individual relays). 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. TO Solder condition Pre-heating: Soldering: BE ED EU IN 9 NT 00 O2 SC CH DI AR M Flow Solder condition: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays. IN 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable whisker length was found by our in house test. 7 UM1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-3) 5449-700 Fax: (8-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com/en/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (-408) 745-4900 Fax: (-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. December 23, 2008. TO BE IN ED EU IN 9 NT 00 O2 SC CH DI AR 8 M