VB-12STK-N

POWER RELAY 2 POLE—5 A (MEDIUM LOAD CONTROL) VB SERIES n FEATURES l l l l l l RoHS compliant l l l UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated Working class: C UL class B (130°C) insulation Type of service: continuous duty Heavy duty miniature slim type power relay High isolation in small package —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC (between coil and contacts) —Surge strength: 10,000 V Standard and high sensitivity types available Flux free type and plastic sealed type available Lead Free since date code: 0438B9, 0434R - Please see page 8 for more information To be Di n ORDERING INFORMATION [Example] (a) (b) (c) (d) VB – 12 S M B U – 5 (a) (*) (b) (c) (d) (e) (f) (*) (g) sc on Series Name Nominal Voltage Coil Type Contact Arrangement VB: VB Series Refer to the COIL DATA CHART Ti Nil : Standard type (700-750 mW) S : High sensitive type (530 mW) M : 2 form A (DPST-NO) T : 2 form C (DPDT) B : Flux free type C : Plastic sealed type (with tape) K : Plastic sealed type Nil : TV-rating U : General (non TV-rating) N: Nil : 5: Nil : E: nu eD (e) (f) Enclosure Standard (g) Contact Material Silver alloy Silver cadmium oxide (TV-3 rating) Silver cadmium oxide (non TV-rating) Gold overlay silver-nickel (non TV-rating) Silver-nickel (non TV-rating) 1 Actual marking omits the hyphen (–) of (*) VB SERIES n COIL DATA CHART TV-3 RatingStandardNominal Coil resistanceMust operate Must releaseNominal voltage (10%) voltage 5A Standard Type High Sensitivity Type VB- 3M ( ) VB- 5M ( ) VB- 6M ( ) VB- 3 ) ( ) U-( ) ( VB- 5 ) ( ) U-( ) ( VB- 6 ) ( ) U-( ) ( VB- 9 ) ( ) U-( ) ( VB- 12 ) ( ) U-( ) ( VB- 14 ) ( ) U-( ) ( VB- 18 ) ( ) U-( ) ( VB- 24 ) ( ) U-( ) ( VB- 36 ) ( ) U-( ) ( VB- 48 ) ( ) U-( ) ( VB- 60 ) ( ) U-( ) ( VB-100 ) ( ) U-( ) ( 3 V DC 5 V DC 6 V DC 9 V DC 12 V DC 14 V DC 18 V DC 24 V DC 36 V DC 48 V DC 60 V DC 3 V DC 5 V DC 12.5 Ω 36 Ω 50 Ω 115 Ω 200 Ω 280 Ω 460 Ω 820 Ω 1,850 Ω 3,300 Ω 5,100 Ω 13,400 Ω 17 Ω 47 Ω 2.1 VDC 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 9.8 VDC 12.6 VDC 16.8 VDC 25.2 VDC 33.6 VDC 42.0 VDC 70.0 VDC 2.1 VDC 3.5 VDC 4.2 VDC voltage 0.3 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.4 VDC 1.8 VDC 2.4 VDC 3.6 VDC 4.8 VDC 6.0 VDC 10.0 VDC 0.3 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.4 VDC 2.4 VDC power 0.72 W 0.70 W 0.72 W 0.70 W 0.72 W 0.70 W 0.70 W 0.70 W 0.70 W 0.70 W 0.70 W 0.75 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W 0.53 W To VB- 9M ( ) VB- 12M ( ) VB- 14M ( ) VB- 18M ( ) VB- 24M ( ) VB- 36M ( ) VB- 48M ( ) VB- 60M ( ) VB-100M ( ) be VB- 3S ) ( ) U-( ) ( VB- 5S ) ( ) U-( ) ( VB- 6S ) ( ) U-( ) ( VB- 9S ) ( ) U-( ) ( VB-12S ) ( ) U-( ) ( VB-14S ) ( ) U-( ) ( VB-18S ) ( ) U-( ) ( VB-24S ) ( ) U-( ) ( VB-36S ) ( ) U-( ) ( VB-48S ) ( ) U-( ) ( VB-60S ) ( ) U-( ) ( Di sc 100 V DC 6 V DC 9 V DC 12 V DC 14 V DC 18 V DC 24 V DC 36 V DC 48 V DC 60 V DC 100 V DC on 68 Ω 155 Ω 270 Ω 370 Ω 610 Ω 1,100 Ω 2,450 Ω 4,400 Ω 6,800 Ω 18,860 Ω Ti 6.3 VDC 8.4 VDC 9.8 VDC 12.6 VDC 25.2 VDC 33.6 VDC 16.8 VDC nu 1.8 VDC 3.6 VDC 4.8 VDC 42.0 VDC 70.0 VDC 6.0 VDC 10.0 VDC ( VB-100S ) ( ) U-( ) Note: All values in the table are measured at 20 °C. eD 2 VB SERIES n SPECIFICATIONS Item TV-3 Rating VB-( ) M Contact Arrangement Material Standard Type VB-( ) U VB-( )-E VB-( ) M-N VB-( ) U-5 VB-( ) U-N 2 form A (DPST-NO) 2 form A (DPST-NO) or 2 form C (DPDT) Silver-alloy Gold overlay silver-nickel (non gold overlay only VB-E) Silver-alloy SilverSilvercadmium cadmium oxide oxide Single Maximum 100 mΩ 5 A 240 VAC/24 VDC 7A 1,200 VA, 120 W 250 VAC, 150 VDC To Coil Style Resistance (initial) (at 1 A 6 VDC) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load * Maximum Inrush Current Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature 1 be Di sc 5A 100 mA 5 VDC (VB-M, 5, E) 10 mA 5 VDC (VB-) 51 A 120 VAC (at lamp load) — Standard type: 700 to 750mW, high sensitivity type: 530mW Standard type: 350 to 370mW, high sensitivity type: 260mW Standard type: –40°C to +65°C, high sensitivity type: –40°C to +75°C (no frost) Time Value Life Operate (at nominal voltage) Release (at nominal voltage) Mechanical Electrical Maximum 15 ms Maximum 10 ms on 104 2 × 107 operations minimum 1 × 105 operations minimum at rated load Ti 3 × 104 operations minimum 5 × 104 operations minimum at motor load at motor load (1/8HP 120 VAC) (1/8HP 120 VAC) 5× operations — minimum at lamp load Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Misoperation Endurance nu 10 to 55 Hz (double amplitude of 1.5 mm) 10 to 55 Hz (double amplitude of 1.5 mm) 100 m/s2 (11 ± 1 ms) 1,000 m/s2 (6 ± 1 ms) Approximately 17 g eD *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. *2 IMQ 2 *3 IMQ 0 3 VB SERIES n SAFETY STANDARDS Type UL CSA Compliance UL 508, 873 E56140 C22.2 No. 14 LR 35579 Contact rating Flammability: UL 94-V0 (plastics) TV-rating 5A, 240VAC/24VDC (resistive) 1/6 HP, 240VAC/120VAC Pilot duty: C150 TV-3 120VAC 5A, 240VAC/24VDC (resistive) 1/6 HP, 240VAC/120VAC Pilot duty: C150 VDE To 0435, 0631, 0700, 0860 Complies with SEV, SEMKO, CQC, VDE n INSULATION Item Resistance (initial) Dielectric Strength be open contacts coil and contacts Di Minimum 1,000 MΩ 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC 1 min., (3,000 VAC 1 min. adjacent contacts) 10,000 V (6,000V adjacent contacts) sc Note Surge Voltage (coil and contact) on at 500 VDC n CHARACTERISTIC DATA Ti nu 1.2 x 50µs standard wave eD 4 VB SERIES To be Di sc n REFERENCE DATA on Ti nu eD 5 VB SERIES n DIMENSIONS l Dimensions VB-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VB type To be Di sc VB-MK type (Plastic sealed type) on Ti nu eD VB-K type (Plastic sealed type) Unit: mm 6 VB SERIES VB-MC type (Plastic sealed type with tape) VB-C type (Plastic sealed type with tape) To be Di sc on Unit: mm Ti nu eD 7 VB SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l To 2. Recommended Lead Free Solder Profile l be Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: Di sc maximum 120˚C dip within 5 sec. at 260˚C soler bath on Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. Ti nu We highly recommend that you confirm your actual solder conditions eD 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 8 VB SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ To ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009. be Di sc on Ti nu eD 9