VE-12H-K-HV-VD

POWER RELAY 1 POLE— 5 A (MEDIUM LOAD CONTROL) VE SERIES n FEATURES l l RoHS compliant UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low cost, miniature relay with big performance in small package —Higher surge voltage type is available (6,000 V) —2,000 VAC between coil and contacts l Slim type—meets high density mounting requirement l Wide operating range l Easy circuit design with completely separated terminal arrangement (coil and contact terminals) l Plastic sealed type l RoHS compliant since date code: 0434R Please see page 8 for more information l Crepage min. 3.2 mm n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) (g) (h) (i) VE – 12 H M S E – K – HV – VD (a) (*) (b) (c) (d) (e) (f ) (g) (h) (i) VE : VE Series Refer to the COIL DATA CHART H : Heavy duty type Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) Nil : Standard type (360 mW) S : High sensitivity type (250 mW) Series Name Nominal Voltage Contact Rating Contact Arrangement Coil Type Contact Material (Rating) Enclosure Surge Strength Standard Nil : Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A) E : Silver-nickel (N.C.: 3 A, N.O.: 5 A) 5 : Silver cadmium oxide (N.C.: 5 A, N.O.: 5 A) K : Plastic sealed type Nil : Standard type (4,000 V) HV High dielectric strength type (6,000 V) : VD: UL, CSA, VDE approved type Note: ctual marking omits the hyphen (-) of (*) A 1 VE SERIES n COIL DATA CHART MODEL VE-( ) HM VE-( ) HME VE-( ) H VE-( ) HE High Sensitive Type Standard Type VE- 5H (M) (E)-K VE- 6H (M) (E)-K VE- 9H (M) (E)-K VE 12H (M) (E)-K VE-18H (M) (E)-K VE-24H (M) (E)-K VE-48H (M) (E)-K VE- 5H (M) S (E)-K VE- 6H (M) S (E)-K VE- 9H (M) S (E)-K VE 12H (M) S (E)-K VE-18H (M) S (E)-K VE-24H (M) S (E)-K VE-48H (M) S (E)-K VE-( ) HM5 VE-( ) H5 VE- 5H (M) 5-K VE- 6H (M) 5-K VE- 9H (M) 5-K VE-12H (M) 5-K VE-18H (M) 5-K VE-24H (M) 5-K VE-48H (M) 5-K VE- 5H (M) S5-K VE- 6H (M) S5-K VE- 9H (M) S5-K VE-12H (M) S5-K VE-18H (M) S5-K VE-24H (M) S5-K VE-48H (M) S5-K Nominal voltage 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC Coil resistance (±10%) 69 Ω 100 Ω 225 Ω 400 Ω 900 Ω 1,600 Ω 6,400 Ω 100 Ω 145 Ω 325 Ω 575 Ω 1,300 Ω 2,310 Ω 9,220 Ω Must operate voltage* 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 12.6 VDC 16.8 VDC 33.6 VDC 3.6 VDC 4.3 VDC 6.5 VDC 8.6 VDC 13.0 VDC 17.3 VDC 34.7 VDC Must release voltage* 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC 2.4 VDC 0.25 VDC 0.3 VDC 0.45 VDC 0.6 VDC 0.9 VDC 1.2 VDC 2.4 VDC Nominal power 360 mW 360 mW 360 mW 360 mW 360 mW 360 mW 360 mW 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW Note: All values in the table are measured at 20 °C. *: Specified values are subject to pulse voltage. 2 VE SERIES n SPECIFICATIONS Item Contact Coil Time Value Life Other Arrangement Material Style Resistance (initial) (at 1 A 6 VDC) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load*1 Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Operate (at nominal voltage) Release (at nominal voltage) Mechanical Electrical (at Rating) Vibration Misoperation Resistance Endurance Shock Misoperation Resistance Endurance Weight VE-( ) HM(S)E-K VE-( ) HM(S)-K VE-( ) H(S)E-K VE-( ) H(S)-K VE-( ) HM(S)5-K VE-( ) H(S)5-K 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT) Gold overlay silver nickel, silver nickel Silver-cadmium oxide alloy Single Maximum 70 mΩ (VE-HM, H) Maximum 100 mΩ (VE-HME, HE) Maximum 200 mΩ 5 A 250 VAC 5 A 250 VAC (N.O.) 5 A 250 VAC 3 A 250 VAC (N.C.) 7 A 1,250 VA (N.O.) 1,250 VA 750 VA (N.C.) 250 VAC, 150 VDC 5 A 5 A (N.O.) 5 A 3 A (N.C.) 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) Standard type: 360 mW. High sensitivity type: 250 mW Standard type: 177 mW. High sensitivity type: 130 mW Standard: –40°C to +85°C. High sensitivity: –40°C to +90°C (no frost) Maximum 10 ms Maximum 5 ms 1 × 107 operations minimum Standard Type: 1 × 105 ops. min. High sensitivity type: 5 x 104 ops. min. 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 3.3 mm) 100 m/s2 (11 ±1 ms) 500 m/s2 (6 ±1 ms) Approximately 8 g 1,250 VA *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 VE SERIES n INSULATION Item Resistance (initial) Dielectric Strength open contacts VE - ( ) HME VE - ( ) HM 1,000 VAC 1 min. VE - ( ) HE VE - ( ) H 750 VAC 1 min. VE - ( ) HM5 VE - ( ) H5 Note at 500 VDC 1,000 VAC 1 min. 750 VAC 1 min. 1.2 x 50µs standard wave Minimum 1,000 MΩ 1 min. coil and contacts 2,000 VAC 1 min. Surge Voltage (coil and contact) Standard: 4,000 V, High Sensitive: 6,000V n SAFETY STANDARDS Type UL CSA Compliance UL 508 E56140 C22.2 No. 14 LR 35579 Contact rating Flammability: UL 94-V0 (plastics) VE-( )-H: 5A, 250VA/30VDC (N.O. resistive) 3A, 250VAC (N.C. resistive) 5A, 30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC VE-( )-HM 5A, 250VAC/30VDC (resistive) 1/12 HP, 250VAC /125VAC VE-( )-H5 5A, 250VAC/30VDC (N.O. resistive) 1/10 HP, 250VAC /125VAC (N.O. resistive) 5A, 250VAC/30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC (N.C. resistive) VE-( )-HM5 5A, 250VAC/30VDC (resistive) 1/10 HP, 250VAC /125VAC VDE Complies with CQC 4 VE SERIES n REFERENCE DATA 5 VE SERIES n DIMENSIONS l Dimensions VE-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VE type Unit: mm 6 VE SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 7 VE SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. November 29, 2007 8