VS-12SKU-NR-SM2

POWER RELAY 1 POLE—15A n FEATURES l l VS-NR SERIES RoHS compliant UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available l Working class: C l UL class B (130°C) insulation l Type of service: continuous duty l Heavy duty miniature slim type power relay l High isolation in small package —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC (between coil and contacts) —Surge strength: 10,000 V l Standard and high sensitivity types available l Flux free type and plastic sealed type available l Lead Free since date code: 0437L2 Please see page 11 for more information l Cadmium free is available n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) (g) (h) VS – 12 S M B U – NR – UC (a) (*) (b) (c) (d) (e) (f ) (g) (h) VS : VS-NR Series Refer to the COIL DATA CHART Nil : Standard type (700-750 mW) S : High sensitivity type (530 mW) M : 1 form A (SPST-NO) B : Flux free type C : Plastic sealed type (with tape) K : Plastic sealed type Nil : TV rating type U : Non TV rating type (standard type) NR: Silver alloy UC : UL, CSA SM2 : UL, CSA, VDE, SEMKO IM2 : UL, CSA, VDE, SEV, SEMKO Series Name Nominal Voltage Coil Type Contact Arrangement Enclosure Standard Contact Material Safety Standard Note: Actual marking omits the hyphen (-) of (*) 1 VS-NR SERIES n PART NUMBERS Standard 700 to 750 mW TV-8 rating Ordering Part Number VS-3M(B, C, K)-NR VS-5M(B, C, K)-NR VS-6M(B, C, K)-NR VS-9M(B, C, K)-NR VS-12M(B, C, K)-NR VS-14M(B, C, K)-NR VS-18M(B, C, K)-NR VS-24M(B, C, K)-NR VS-36M(B, C, K)-NR VS-48M(B, C, K)-NR VS-60M(B, C, K)-NR VS-100M(B, C, K)-NR VSNR Series Coil 3 5 6 9 12 14 18 24 36 48 60 100 Coil Power 720 700 720 700 720 700 700 700 700 700 700 750 Coil Power 720 700 720 700 720 700 700 700 700 700 700 750 B: Flux free C: Plastic sealed M: 1 form A with tape K: Plastic sealed UC: UL,CSA VD3: UL/CSA/ VDE TV rating Contact Safety Material Standard B: Flux free C: Plastic sealed with M: 1 form A tape K: Plastic sealed NR: Silver alloy UC: UL,CSA SM2: UL, CSA, VDE, SEMKO Contact TV rating Contact Material Safety Standard TV-8 Standard 700 to 750 mW Non-TV-8 rating Ordering Part Number VS-3M(B,C,K)U-NR VS-5M(B,C,K)U-NR VS-6M(B,C,K)U-NR VS-9M(B,C,K)U-NR VS-12M(B,C,K)U-NR VS-14M(B,C,K)U-NR VS-18M(B,C,K)U-NR VS-24M(B,C,K)U-NR VS-36M(B,C,K)U-NR VS-48M(B,C,K)U-NR VS-60M(B,C,K)U-NR VS-100M(B,C,K)U-NR VS-NR Series Coil 3 5 6 9 12 14 18 24 36 48 60 100 Contact No TV-8 NR: Silver alloy 2 VS-NR SERIES High Sensitive type 530 mW Non-TV-8 rating Ordering Part Number VS-3SM(B, C, K)U-NR VS-5SM(B, C, K)U-NR VS-6SM(B, C, K)U-NR VS-9SM(B, C, K)U-NR VS-12SM(B, C, K)U-NR VS-14SM(B, C, K)U-NR VS-18SM(B, C, K)U-NR VS-24SM(B, C, K)U-NR VS-36SM(B, C, K)U-NR VS-48SM(B, C, K)U-NR VS-60SM(B, C, K)U-NR VS-100SM(B, C, K)U-NR VSNR Series Coil 3 5 6 9 12 14 18 24 36 48 60 100 530 B: Flux free C: Plastic sealed with M: 1 form A tape K: Plastic sealed NR: NonSilver TV-8 alloy UC: UL,CSA VD3: UL/ CSA/VDE Coil Power Contact TV rating Contact Material Safety Standard n PART NUMBERS 3 VS-NR SERIES n COIL DATA CHART Standard Coil Voltage 3 5 6 9 12 14 18 24 36 48 60 100 Nominal Voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 14 VDC 18 VDC 24 VDC 36 VDC 48 VDC 60 VDC 100 VDC Max. Coil Voltage*1 4.95 VDC 8.25 VDC 9.90 VDC 14.85 VDC 19.8 VDC 23.1 VDC 29.7 VDC 39.6 VDC 59.4 VDC 79.2 VDC 99.0 VDC 165 VDC Coil Must Operate Resistance Voltage*2 ( ±10%) 12.5 Ω 36 Ω 50 Ω 115 Ω 200 Ω 280 Ω 460 Ω 820 Ω 1,850 Ω 3,300 Ω 5,100 Ω 13,400 Ω 2.1 VDC 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 9.8 VDC 12.6 VDC 16.8 VDC 25.2 VDC 33.6 VDC 42.0 VDC 70.0 VDC Must Release Voltage*2 0.3 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.4 VDC 1.8 VDC 2.4 VDC 3.6 VDC 4.8 VDC 6.0 VDC 10.0 VDC Coil Power 720 mW 700 mW 720 mW 700 mW 720 mW 700 mW 700 mW 700 mW 700 mW 700 mW 700 mW 750 mW High Sensitive Coil Voltage 3 5 6 9 12 14 18 24 36 48 60 100 Nominal Voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 14 VDC 18 VDC 24 VDC 36 VDC 48 VDC 60 VDC 100 VDC Max. Coil Voltage*1 4.95 VDC 8.25 VDC 9.90 VDC 14.85 VDC 19.8 VDC 23.1 VDC 29.7 VDC 39.6 VDC 59.4 VDC 79.2 VDC 99.0 VDC 165 VDC Coil Must Operate Resistance Voltage*2 ( ±10%) 17 Ω 47 Ω 68 Ω 115 Ω 270 Ω 370 Ω 610 Ω 1,000 Ω 2,450 Ω 4,400 Ω 6,800 Ω 18,860 Ω 2.1 VDC 3.5 VDC 4.2 VDC 6.3 VDC 8.4 VDC 9.8 VDC 12.6 VDC 16.8 VDC 25.2 VDC 33.6 VDC 42.0 VDC 70.0 VDC Must Release Voltage*2 0.3 VDC 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.4 VDC 1.8 VDC 2.4 VDC 3.6 VDC 4.8 VDC 6.0 VDC 10.0 VDC Coil Power 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW 530 mW Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage 4 VS-NR SERIES n SPECIFICATIONS Item Contact Arrangement Material Style Resistance (initial) (at 1A 6VDC) Rating (resistive) Max. Carrying Current*1 Max. Switching Power Max. Switching Voltage Min. Switching Load*2 Max. Inrush Current (at lamp load) Coil Nominal Power (at 20˚C) Operate Power (at 20˚C) Operating Temperature Time Value Life Operate (at nominal value) Release (at nominal value) Mechanical Electrical Contact rating Motor TV-8 Rating Type VS-( )M-NR 1 form A (SPST-NO) Silver alloy Single Max. 100mΩ 15A 240VAC / 24VDC 15A 1800VA / 360W 250 VAC / 150VDC 100mA 5VDC 117A 120VAC Standard VS-( )MU-NR Standard type: 700 to 750mW. High sensitive type: 530mW Standard type: 350 to 370mW. High sensitive type: 260mW Standard type: -40ºC to +65ºC. High sensitive type: -40ºC to +75ºC (no frost) Maximum 15ms Maxiumum 10ms 2x107 operations minimum 1x105 operations minimum (resistive) 5x104 operations minimum (at 1/4 HP 120VAC UL HP rating) 2.5x104 operations minimum 10 to 55 Hz (double amplitude of 1.5mm) 10 to 55 Hz (double amplitude of 1.5mm) 100m/s2 (11±1m/s) 1,000m/s2 (6±1m/s) Approximately 17g 3x104 operations minimum (at 1/4 HP 120VAC UL HP rating) Lamp Other Vibration Misoperation ResisEndurance tance Shock Resistance Weight Misoperation Endurance *1 When max. carrying current is more than 10A, PCB layout needs to be considered. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 5 VS-NR SERIES n SAFETY STANDARDS Type UL Compliance UL 508 E56140 CSA C22.2 No. 14 LR 35579 Contact rating Flammability: UL 94-V0 (plastics) Isolation: classB 10A, 240VAC(resistive) 1/2 hp, 240VAC/120VAC 1/3 hp, 120VAC / 240VAC Pilot duty: B150 [TV-8] 15A, 120VAC/24VDC (resistive) 1/3 hp, 240VAC/120VAC 15A 250VAC (cosØ=1) 4.3A 250VAC (cos=0.4) 15A 24VDC (0ms) 15A/120VAC, 250VAC VDE DIN EN 61810-1 Complies with SEV, SEMKO, NEMKO, DEMKO, FIMKO, CQC, VDE, n INSULATION Item Resistance (initial) Dielectric Strength open contacts coil and contacts VS Minimum 1,000 MΩ 1 min. Note at 500 VDC 1,000 VAC (50/60 Hz) 1 min. 10mA detection current 5,000 VAC (50/60 Hz) 1 min. 10mA detection current 10,000 V 8 mm / 8 mm 250 V 2 III 1.2 x 50µs standard wave Surge Voltage (coil and contact) Clearance/Creepage Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 6 VS-NR SERIES n CHARACTERISTIC DATA Timing Timing 120 100 Temperature Rise (deg.) Coil Temperature Rise VS-NR Time (ms) Time (ms) 80 60 40 20 0 15A Operate Operate 0A Release Release Coil Power (W) Operating Range 2.4 Nominal Voltage Multiplying Factor 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0A Coil Power (W) Maximum Switching Power 100 0 0.4 0.8 1.2 Coil Power (W) 1.6 2 Life Curves Operation (x104) 120VAC resistive VS-NR 50 20 10 5 2 1 DC resistive AC resistive Switching Current (A) 240VAC resistive 24VDC resistive 120VAC cosφ=0.4 240VAC cosφ=0.4 15 A ge (H ot Co il) il) Op Volta erate 0.5 0.2 10 O Volt perate age (C ool Co 0 10 20 30 40 50 60 70 80 90 100 110 Ambient temperature (°C) 20 50 100 200 Contact Voltage (V) 500 1000 Contact Current (A) 7 VS-NR SERIES n REFERENCE DATA Distribution of Operate & Release Voltage Operate Release Distribution of Operate & Release Time Operate Release Distribution of Contact Resistance Make Break Distribution (%) Distribution (%) Distribution (%) Nominal Voltage Mult. Factor (%) Time (ms) Contact Resistance (mΩ) Mechanical Test Voltage (V) Electrical Test Voltage (V) Electrical Test Voltage (V) Operate Operate 1200 ops Operate Release Release Contact resistance (mΩ) Contact resistance (mΩ) Make Break Contact resistance (mΩ) Release Make 30 ops./min. 120VAC 15A (resistive) Initial 30 ops./min. 24VDC 10A (resistive) Make Operation (x104) Operation (x104) Initial Operation (x104) 8 VS-NR SERIES n DIMENSIONS l Dimensions VS-M-NR type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VS-MK-NR type (Plastic sealed) 29.2 ±0.2 12.9 ±0.2 (2.7) (2.5) 1 25.3 +0.2 COM 2 2-φ 1.3 2-φ 1 NO 5 3 3.5 20 3.5 0.6 3.5 0.32 20 φ 0.5 1 7.5 VS-MC-NR type (Plastic sealed with tape) Unit: mm 7.5 9 VS-NR SERIES VS-K type (Plastic sealed type) VS-MC type (Plastic sealed type with tape) VS-C type (Plastic sealed type with tape) Unit: mm 10 VS-NR SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 11 VS-NR SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 4, 2008. 12