AFBR-811RH1Z

MiniPOD™ AFBR-811VxyZ, AFBR-821VxyZ 10 Gbps/Channel Twelve Channel, Parallel Fiber Optics Modules Product Brief Description Features The AFBR-811VxyZ Twelve Channel, Pluggable, Parallel Fiber Optics Transmitter and AFBR-821VxyZ Twelve Channel, Pluggable, Parallel Fiber Optics Receiver are high performance fiber optics modules for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. • Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 and nPPI) per lane Avago’s MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. AFBR-811RxyZ Tx/AFBR-821RxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. AFBR-811FxyZ Tx/AFBR-821FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief. • High density footprint: 21.95 mm × 18.62 mm size The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch http://portal.fciconnect.com/Comergent//fci/drawing/ 55714.pdf The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector. The thermal interface provided can require either a user provided heat sink or use of the Avago general purpose clip on heat sink, to maintain the module case temperature to be between 0 °C to 70 °C during continuous operation. Applications • 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects • Data Aggregation, Backplane and Proprietary Protocol and Density Applications • High Performance and High Productivity computer interconnects • Switch Fabric interconnects Patent - www.avagotech.com/patents • Compliant to 12×QDR Infiniband • Operates at 10.3125 Gbps per channel with 64b/66b encoded data for 100GbE application and at 10 Gbps with 8b/10b encoded data for IB-QDR application • High Aggregate bandwidth: 120 Gbps per module • Two package options to optimize internal cable management and system layout • Separate transmitter and receiver modules • 850 nm VCSEL array in transmitter; PIN array in receiver • Links up to 150 m at 10.3125 Gbps with OM4 4700 MHz•km 50 mm MMF • Optical Interface: PRIZM LightTurn optical turn 1×12 ribbon fiber connector • Pluggable electrical interface: 9×9 MEG-Array for ease of design and manufacturability • Low Power consumption: 3.0 W Max per Transmitter/ Receiver pair (0 °C to 70 °C operating range) • Dedicated signals for module address, module reset and host interrupt • Two Wire Serial (TWS) interface with maskable interrupt for expanded functionality including: – Individual channel functions: disable, squelch disable, lane polarity inversion, TX eye margin enable – A/D read back: module temperature and supply voltages, per channel laser current and laser power, or received power – Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarm flags – Programmable equalization integrated with DC blocking caps at transmitter data input – Programmable receiver output swing and deemphasis level – Field Upgradable Firmware capability • 0 °C to 70 °C case temperature continuous operating range. 85 °C supported for short durations Figure 1. MiniPOD™ Transmitter and Receiver Modules with a) Round Cable and b) Flat Cable: shown with and without dust covers (White = Tx, Black = Rx). Figure 2. MiniPOD™ Transmitter and Receiver flat ribbon cable modules in a tiled arrangement example. Part Number Ordering Options Modules for use with Flat Ribbon Jumper Cable Modules for use with Round Jumper Cable Transmitter Base Part Number AFBR-811FxyZ Receiver Base Part Number AFBR-821FxyZ Transmitter Base Part Number AFBR-811RxyZ Receiver Base Part Number AFBR-821RxyZ Where: 81 = Transmitter; 82 = Receiver F/R: R = module package for use with round cable; F = module package for use with Flat ribbon cable V: R= module package for use with round cable; F = module package for use with Flat ribbon cable x: N = No Heat Sink, H = Pin Clip-on Heat Sink attached Y: 1 = 100m Key Product Parameters The Avago Technologies MiniPOD™ modules operate at 850 nm and are compliant to the Multi-mode Fiber optical specs in clause 86 and relevant electrical specs in annex 86A of the IEEE 802.3ba specifications. Parameter Value Units Notes Data rate per lane 10.3125 Gbps As per 802.3ba: 100GBASE-SR10 and nPPI specifications Number of operational lanes 12 Link Length 100 150 m m OM3, 2000 MHzMHz•km 50 µm MMF OM4, 4700 MHz•km 50 µm MMF Operating Temperature Range 0-70 ºC Case Temperature Power Supply Voltage 3.3 and 2.5 V Management Interface Two-Wire Serial Compatible with industry standard two-wire serial protocol scaled for 1.2 volt LVCMOS. It can also tolerate 3.3V LVTTL. Laser Output Power Class 3R (Class 1M at Fiber Output) Without optical connector. Electrical Interface MEG-Array Module Dimensions 18.6 x 22 x 14.5 mm Flat Ribbon Cable Housing 18.6 x 22 x 15.6 mm Round Ribbon Cable Housing 100GbE operation utilizes the middle ten lanes (Rx and Tx) of the 12 physically defined lanes 1.27mm pitch and 4mm contact mate height Laser Safety Notice * A Class 3R laser is considered safe if handled carefully, with restricted beam viewing. With a class 3R laser the maximum permissible exposure can be exceeded, but with a low risk of injury. 2 Mechanical Dimensions, Package Outlines Flat Ribbon Cable Housing FIBER EXIT SIDE INDICATOR ON BOTH SIDES (14.50) (18.82 WITH LABELS) (18.62) HEAT SINK SURFACES KEEP CLEAN AVOID SCRATCHES AVOID DENTS (21.95) (4X R1.50) (18.62) (4X R1.50) (21.95) Round Cable Housing * All dimensions in millimeters: Mechanical dimensions depicted are nominal dimensions and are subject to change For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2842EN - March 8, 2013