AS0BC21-S48BB-7H

1 2 3 4 5 SOLIDWORK GENERATED DRAWING,DON'T CHANGE BY HAND 2.50 DIM.G DIM.C DIM.B 0.12 ±0.02 PIN 1 TYP. 5 PIN 75 A 4 DATE CODE 6 7 8 NOTES: REV. ECN. NO. APPD. 1. ELECTRICAL CHARACTERISTICS: A BC-14-0068363 C.S. Li 1.1 CONTACT CURRENT RATING: 0.5 AMPERE MAX. PER PIN. 1.2 VOLTAGE RATING: 50V AC. B BC-15-0014318 C.S. Li 1.3 INSULATION RESISTANCE :500 MEGAOHMS MIN. AT 500V DC. 1.4 DIELECTRIC WITHSTANDING VOLTAGE: 300V AC RMS AT 60Hz,FOR 1 MINUTE. 1.5 CONTACTRESISTANCE: 55 MILLIOHMS MAX.PER PIN INITIAL. R=20 MILLIOHMS MAX.PER PIN AFTER FULL ENVIRONMENT TESTING. A 2. MECHANICAL CHARACTERISTICS: DURABILITY:60 MATING CYCLES. 3. OPERATION TEMPERATURE:-40 C TO +80 C. 4. RECOMMENDED PROCESS CONDITION: SMT, PEAK TEMPERATURE:260 C, 10~20S. 5. KEY LABLE "*" IS A CAPITAL LETTER PER THE PART NO. 6. PLEASE CONTACT FOXCONN SALES REPRESENTATIVE TO VERIFY PRODUCT DETAIL &AVAILABILITY. PI-FILM 0.06 THICKNESS * DIM.E 2.50 21.9 20.15 1.10 ±0.05 F B 3.14 DIM.F PIN 74 TYP. DIM.Z B 0.12 ±0.02 0.50 DIM.D 3.60 PIN 2 20° 4.00MIN. B 1.75 20.0 0.95 ±0.05 0.40 2.17 1 0.60 D 5.40 5.70 2.70 0.25 ±0.05 (2X) 2 10.35 PART NO.DIRECTION: 3 S 0 2 BC * - S 48 B * 7 - H MEMORY MODULE SOCKET HALOGEN FREE&LEAD FREE HORIZONTAL TYPE E 0.70 SECTION: A-A 10.35 A TAPE&REEL SINGLE ROW 0.5P. 67POS.NGFF KEY NAME SMT BLACK COLOR CONTACT AREA PLATING 1=GOLD FLASH Y=5u'" GOLD PLATING 6=10u'" GOLD PLATING 7=15u'" GOLD PLATING 3=30u'" GOLD PLATING 1 0.10 67X CONTACTS PLUS 2X METAL TABS 7.2 CL OF CONNECTOR 2 4.8mm HEIGHT 3 4 S1&D1 5.29 S2&D2 5.44 S3&D3&D4 KEY M -6.125 14.0 2.0 14.0 1.5 1.125 1.375 AS0BC2*-S48BM-7H KEY L -5.125 13.0 3.0 13.0 2.5 1.125 1.375 AS0BC2*-S48BL-7H KEY K -4.125 12.0 4.0 12.0 3.5 1.125 1.375 AS0BC2*-S48BK-7H KEY J -3.125 11.0 5.0 11.0 4.5 1.125 1.375 AS0BC2*-S48BJ-7H KEY H -2.125 10.0 6.0 10.0 5.5 1.125 1.375 AS0BC2*-S48BH-7H KEY G -1.125 9.0 7.0 9.0 6.5 1.125 1.375 AS0BC2*-S48BG-7H KEY F 1.625 6.5 9.5 6.0 9.5 1.375 1.125 AS0BC2*-S48BF-7H KEY E 2.625 5.5 10.5 5.0 10.5 1.375 1.125 AS0BC2*-S48BE-7H KEY D 3.625 4.5 11.5 4.0 11.5 1.375 1.125 AS0BC2*-S48BD-7H KEY C 4.625 3.5 12.5 3.0 12.5 1.375 1.125 AS0BC2*-S48BC-7H KEY B 5.625 2.5 13.5 2.0 13.5 1.375 1.125 AS0BC2*-S48BB-7H KEY A 6.625 1.5 14.5 1.0 14.5 1.375 1.125 AS0BC2*-S48BA-7H KEY NAME DIM.A DIM.B DIM.C DIM.D DIM.E DIM.F DIM.G P/N 4 PI-FILM POLYIMIDE 1 BROWN COLOR 3 METAL TAB STAINLESS STEEL 2 2 CONTACT COPPER ALLOY 67 1 HOUSING THERMOPLASTIC 1 10u" NICKEL UNDER PLATING 100u"MATTE TIN PLATING OVER ALL 50u" NICKEL UNDER PLATING GOLD FLASH PLATING AT TAIL AREA GOLD FLASH OR 5u" GOLD PLATING OR 10u" GOLD PLATING OR 15u" GOLD PLATING OR 30u" GOLD PLATINGOR AT CONTACT AREA UL94V-0, HALOGEN FREE,BLACK COLOR ITEM DESCRIPTION MATERIAL Q'TY TREATMENT X. ± 0.30 X. ± .X ± 0.25 .X 2 ±1 .XX ± 0.15 .XX ± .XXX ± .XXX ± THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. AND SHALL NOT BE REPRODUCED, COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. STANDARD TYPE 5.14 SECTION: B-B 1.10 2.00 1.45 ±0.05 MODULE TYPE 5.20MIN. 4.80 ±0.20 1.80 B DIM.A 0.50 F C DIM. Z MAX. (mm) 5 UNITS MAT'L mm NAME(INTENDED USE) M.2( NGFF) CONNECTOR FINISH Q'TY APPD: C.S Li CHKD: Alex Wang DRAW: Jena Hu 6 D R FOXCONN INTERCONNECT TECHNOLOGY LIMITED. CLASS: CONFIDENTIAL PART NO.(INTENDED USE) AS0BC2*-S48B*-7H C TITLE: DWG NO.: 2015/3/27 7 SECRET GENERAL CUSTOMER DRAWING 317-0000-2385 SCALE SHEET REV. N/A 1/4 B 8 E 1 2 3 4 5 6 7 8 REV. SOLIDWORK GENERATED DRAWING,DON'T CHANGE BY HAND ECN. NO. APPD. X 0.35 ±0.04(34X) 0.13 Z Y X 0.05 Z Z PLATED GND PAD BOTTOM SIDE TOP SIDE DIM.G 2.50 DIM.L B 0.35 ±0.04(33X) 0.13 Z Y X 0.05 Z 3.50 ±0.15 0.20 Z Y M 6.00 ±0.10 3.80 ±0.15 3.50 ±0.08 1.00 ±0.10 DIM.N 5.50 ±0.10 A 1.20 ±0.05 0.15 Z Y M DIM.M DETAIL M 2.50 ±0.15(33X) DIM.W 2.00 ±0.15(34X) A DIM.F 2.50 DETAIL N B 20° ±5° (2X) PIN21 CL OF CARD PIN10 PIN11 M C S PIN 1 PIN 75 N R0.50 ±0.15(2X) 19.85 ±0.15 5.20MIN. DIM.C 4.00MIN.(FOR TOP SIDE COMPONENT ZONE LIMIT) TYP. Y DIM.E DIM.D 4.00 ±0.15(FOR PCB) DIM.B DIM.A 0.80 ±0.08 0.15 M TYPE XX XX-XX-X 0.20MIN. KEY ID DETAIL S COMPONENT MAX HEIGHT(mm) LENGTH(mm) DIM.L E WIDTH(mm) 22 DIM.W 30 1 2 30 42 60 80 110 DIM.N DIM.M S1 1.2 0 S2 1.35 0 X. ± 0.15 X. ± S3 1.5 0 .X ± 0.10 .X ± D1 1.2 1.35 D2 1.35 1.35 D3 1.5 1.35 D4 1.5 0.7 D5 1.5 1.5 3 D 0.30 ±0.25(2X) D C PIN 74 PIN 2 M 0.50 PIN20 .XX ± 0.05 .XX ± .XXX ± .XXX ± THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. AND SHALL NOT BE REPRODUCED, COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. 4 5 UNITS MAT'L mm NAME(INTENDED USE) M.2( NGFF) CONNECTOR R FOXCONN INTERCONNECT TECHNOLOGY LIMITED. CLASS: CONFIDENTIAL PART NO.(INTENDED USE) AS0BC2*-S48B*-7H FINISH Q'TY APPD: C.S Li CHKD: Alex Wang DRAW: Jena Hu 6 TITLE: DWG NO.: 2015/3/27 7 SECRET GENERAL CUSTOMER DRAWING 317-0000-2385 SCALE SHEET REV. N/A 2/4 B 8 E 1 2 3 4 5 6 7 8 REV. SOLIDWORK GENERATED DRAWING,DON'T CHANGE BY HAND ECN. NO. APPD. 22 10.35 10.35 18.50 A A DIM.C 0.50 0.30 ±0.03(34X) 0.10 Z X-Y X 0.10 Z X-Y X 2.50 DIM.B 1.55 ±0.03(34X) 9.25 B PIN 1 PIN 75 PAD REMOVE CL MODULE SEATING PLANE 2.275 C B 1.20 ±0.03(2X) 0.10 Z X-Y X 4.50 5.275 (9.1) CONNECTOR OUTLINE 0.10 Z X-Y X 2.75 ±0.03(2X) 4 1.10 ±0.05 0.10 Z X PIN 2 0.30 ±0.03(33X) 0.10 Z X-Y X PAD REMOVE C 1.60 ±0.05 PIN 74 X DIM.E 9.00 D 10.00 DIM.P 2.50 1.55 ±0.03(33X) 0.50 DIM.D 0.10 Z X-Y X Y 18.00 20.00 6.50 ±0.05 0.10 X Y Z 4.20 ±0.05 22110 108.25 2280 78.25 2260 58.25 2242 40.25 2230 28.25 3042 40.25 3030 28.25 TYPE E DATUM Z IS THE PCB SOLDER SURFACE X. ± 0.15 X. ± .X ± 0.10 .X ± .XX ± 0.05 .XX ± .XXX ± .XXX ± THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. AND SHALL NOT BE REPRODUCED, COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. 1 2 3 4 5 UNITS MAT'L mm R FOXCONN INTERCONNECT TECHNOLOGY LIMITED. CLASS: CONFIDENTIAL PART NO.(INTENDED USE) AS0BC2*-S48B*-7H FINISH Q'TY DIM.P NAME(INTENDED USE) M.2( NGFF) CONNECTOR APPD: C.S Li CHKD: Alex Wang DRAW: Jena Hu 6 D TITLE: DWG NO.: 2015/3/27 7 SECRET GENERAL CUSTOMER DRAWING 317-0000-2385 SCALE SHEET REV. N/A 3/4 B 8 E 1 2 3 4 5 6 7 8 REV. SOLIDWORK GENERATED DRAWING,DON'T CHANGE BY HAND 14.2 ±0.10 1.75 ±0.10 1.50 ±0.10 COVER TAPE 4.00 ±0.10 2.00 ±0.10 A 16.00 ±0.10 LABEL BUBBLE SHEET 2 PCS 32.00 ±0.30 28.40 ±0.10 A B APPD. 2 ELONGATED SPROCKET HOLE FEEDING DIRECTION ECN. NO. B CARRIER TAPE TRAIL TAPE (EMPTY) 160mm MIN. LEAD TAPE (EMPTY) 100mm MIN. CONNECTOR LOADED AREA 400mm MIN. SHIPPING CARTON 40.40 ±0.10 +0.5 32.5 - 0.2 1 R0.75 +0.05 0.00 WATER PROOF BAG TRANSPARENT SEAL TAPE FOLDER PAPER BOARD 37.5 ±0.50 3 D C BUBBLE SHEET 2 PCS 21.5 2.0 ±0.50 +0.05 0.00 381.0 ±1.50 100.0 ±1.50 C 0.05MAX. 0.20 ±0.05 FEEDING DIRECTION D NOTES: 1. COVER TAPE PEELING STRENGTH : 0.01 kgf MIN & 0.13 kgf MAX. AT 300mm/min. 2. 10 POCKETS HOLE PITCH CUMULATIVE TOLERANCE ±0.20mm. COVER TAPE 165 LABEL 3 °~18 PEELING DIRECTION 0 REEL COVER TAPE CARRIER TAPE DESCRIPTION 2 1 ITEM FEEDING DIRECTION CARRIER TAPE E AS0BC2*-S48B*-7H 900 7 6300 P/N PCS/REEL REEL/BOX PCS/BOX 1 2 3 X. ± 0.30 X. ± .X ± 0.25 .X ± .XX ± 0.15 .XX ± .XXX ± .XXX ± THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. AND SHALL NOT BE REPRODUCED, COPIED OR USED IN ANY MANNER WITHOUT THE PRIOR WRITTEN CONSENT OF FOXCONN INTERCONNECT TECHNOLOGY LIMITED. 4 5 UNITS MAT'L mm NAME(INTENDED USE) M.2( NGFF) CONNECTOR R FOXCONN INTERCONNECT TECHNOLOGY LIMITED. CLASS: CONFIDENTIAL PART NO.(INTENDED USE) AS0BC2*-S48B*-7H FINISH Q'TY POLYSTYRENE POLYESTER POLYSTYRENE MATERIAL APPD: C.S Li CHKD: Alex Wang DRAW: Jena Hu 6 TITLE: DWG NO.: 2015/3/27 7 SECRET GENERAL CUSTOMER DRAWING 317-0000-2385 SCALE SHEET REV. N/A 4/4 B 8 E