5624

SYSTEM SENSOR 5600 SERIES MECHANICAL HEAT DETECTORS The System Sensor 5600 Series mechanical heat detectors offer a low cost means for property protection against fire, and for non- life safety installations where smoke detectors are inappropriate. The 5600 Series offers both single and dual circuit models, each available with low or high temperature ratings, and fixed temperature or rate of rise activation. The rate of rise element is restorable to accommodate field testing of the unit. The detectors mount readily on single gang or octagonal back boxes. They can also mount on a four inch square box with aid of a square to round plaster ring. The mounting bracket is reversible to allow for flush and surface mount installations. The 5600 units provide clear markings readily visible on the unit to ensure the proper application. Alphanumeric characters identify the type of detector and temperature rating, both in Fahrenheit and Celsius. Fixed temperature models are identified “FX” while combination units are marked “FX/ROR”. The detector also features positive indication of actuation of the fixed temperature portion. The collector disc drops from the unit making it readily identifiable. Electrical Specifications Operating Voltage 6 -125 VAC 6-28 VDC 125 VDC Contact Ratings 3A 1A 0.3A • • • • FEATURES Attractive Low Silhouette design Multiple Configurations Available Single and Dual Circuit Models Fixed Temperature and Combination Fixed Temperature/Rate-Of-Rise • Readily Visible Alphanumeric Markings • Standard 3.5 or 4-inch Octagonal Mounting • Single Gang or Standard 4” Square Mounting with Plaster Ring S2101 3016008 199-33-E 7270-1209:227 RATINGS AND ORDERING INFORMATION Model 5601 5602 5603 5604 5621 5622 5623 5624 Circuit Single Single Single Single Dual Dual Dual Dual Temp. Rating 135o F (57o C) 194oF (90oC) 135o F (57o C) 194oF (90oC) 135o F (57o C) 194oF (90oC) 135o F (57o C) 194oF (90oC) Type FT + ROR FT + ROR FT only FT only FT + ROR FT + ROR FT only FT only Max. UL Spacing - 10 Foot Ceiling* 50 ft. x 50 ft. (15.24 m x 15.2 m) 50 ft. x 50 ft. (15.24 m x 15.2 m) 25 ft. x 25ft. (7.62 m x 7.62 m) 25 ft. x 25ft. (7.62 m x 7.62 m) 50 ft. x 50 ft. (15.24 m x 15.2 m) 50 ft. x 50 ft. (15.24 m x 15.2 m) 25 ft. x 25ft. (7.62 m x 7.62 m) 25 ft. x 25ft. (7.62 m x 7.62 m) * Refer to NFPA 72 for guidelines for spacing reductions when ceiling heights exceed 10 feet. Specifications are provided for information only, are not intended to be used for installation purposes, and are believed to be accurate. However, no responsibility is assumed by Gamewell-FCI for their use. Specifications subject to change without notice. © 2006 All Rights Reserved GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 www.gamewell-fci.com An ISO 9001 Certified Company 9020-0590 Rev. B