FE135

CHEMETRON FL SERIES Description The FL Series fixed temperature heat detectors consist of a white plastic base containing a switch mechanism, wiring terminals, and a unique three disc heat collector. Two sections of the heat collector are soldered together by a fusible eutectic alloy, which, at rated temperature, will cause the lower disc to drop away, moving a plunger which causes the switch to operate. After operation, the black tip of the plunger is clearly visible. It will remain in the alarm condition until a new heat collector is installed. Circuit continuity and switch operation can be tested at any time by removing the heat collector. FIXED TEMPERATURE HEAT DETECTOR FL Series Features • Replaceable fusible element. Ordering Information Model FL135 Description Max. Spacing • Positive operation indication. • 2-circuit models available. • Attractive and compact. Fixed temp. heat detector 135° F (57° C) 30 x 30 ft (UL & FM) FL200 Fixed temp. heat detector 200° F (93° C) 15 x 15 ft. (UL & FM) † FLD135 Fixed temp. heat detector 135° F, dual contacts 30 x 30 (UL & FM) † FLD200 Fixed temp. heat detector 200° F, dual contacts 15 x 15 (UL & FM) FE135 Replacement heat 135° F (57° C) collector FE200 Replacement heat 200° F (93° C) collector ATA Adapter for mounting on 3” or 4” (7.6 or 10.2 cm) octagonal box APC Protective cover † Includes ATA adapter Specifications Contact Type Models FL135, FL200 (SPST, normally open) Models FL135D, FL200D (DPST, normally open) Contact Ratings 6.0 amp. @ 8-125 VAC 3.0 amp. @ 6-28 VDC Dimensions: 2 18” D x 1 1/8” H (5.5 D x 2.9 H cm) An ISO 9000-2000 Company GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2006 Gamewell-FCI. All rights reserved. www.gamewell-fci.com 9020-0035 Rev. F page 1 of 1