GM7130HV-ATA5RG

GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Description GM7130HV series is designed to provide all the active function for a step-down (buck) switching regulator, and drives a maximum load current as high as 3A line and load regulations. GM7130HV is available in fixed output voltages of 3.3V, 5V, 12V and a versatile Adjustable output version. These regulators are simple to use and require minimum number of external components. The features include internal frequency compensation and a fixed-frequency oscillator. The GM7130HV is high-efficiency replacements for popular three-terminal linear regulators, and is requiring a smaller heat sink or even no need heat sink. GM7130HV performs well with standard inductors from most of manufacturers, and simplifying the design of switch-mode power supplies. External shutdown is included with 80 µA (typical) standby current. The output switch has cycle-by-cycle current limiting as well as thermal shutdown for full protection under fault conditions. Features 3.3V, 5V, 12V and Adjustable output versions Adjustable version output voltage range 1.23V to 57V VOUT accuracy is up to ±2% under specified input voltage the output load conditions Input voltage range up to 60V Requires only 4 external components with High efficiency TTL shutdown capability, low power standby mode Built-in thermal shutdown, current limit protection Uses standard inductors 52 kHz fixed frequency internal oscillator GM7130HV operates at a switching frequency of 52 kHz which allowing smaller size filter components than what would be needed with lower frequency switching regulators. GM7130HV series are available in a standard 5lead TO-220, TO220B and TO263 packages. Preliminary Information On-card/board switching regulators Positive to negative converter (buck-boost) Application Pre-regulator for linear regulators High-efficiency step-down buck regulator T ypical Application Circuits GM7130HV-5.0 Feedback 4 1 VIN Output 5 CIN 100µF GND 3 ON/OFF 5 D1 1N5822 L1 100µH 5V regulated output, COUT 680µF w ww.gammamicro.com.tw GM7130HVV2.00 1 7V – 40V Unregulated DC Input GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Marking Information and Pin Configurations (Top View) TO-220-5 TO-220B-5 TO-263-5 GM7130HVG VVAYWW GM7130HVG VVAYWW GM7130HVG VVAYWW 1. VIN 2. Output 4. Feedback 3. GND 5. ON/OFF G: Green Product VV: Voltage suffix (15 = 1.5V, 50 = 5.0V…A = Adj) A: Assembly / Test site code Y: Year WW: Week Preliminary Information 1. VIN 2. Output 4. Feedback 3. GND 5. ON/OFF 1. VIN 5. ON/OFF 4. Feedback 3. GND 2. Output GM7130HVV2.00 2 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Ordering Information Ordering Number GM7130HV-ATA5TG GM7130HV-ATA5RG GM7130HV-ATB5TG GM7130HV-ATB5BTG GM7130HV-3.3TA5TG GM7130HV-3.3A5RG GM7130HV-3.3B5TG GM7130HV-3.3B5BTG GM7130HV-5.0TA5TG GM7130HV-5.0A5RG GM7130HV-5.0B5TG GM7130HV-12B5BTG GM7130HV-12TA5TG GM7130HV-12A5RG GM7130HV-12B5TG GM7130HV-12B5BTG 5.0 3.3 Adj Output Voltage Package TO-263-5 TO-263-5 TO-220-5 TO-220-5B TO-263-5 TO-263-5 TO-220-5 TO-220-5B TO-263-5 TO-263-5 TO-220-5 TO-220-5B Shipping 50 Units / Tube 800 Units / Reel 50 Units / Tube 50 Units / Tube 50 Units / Tube 800 Units / Reel 50 Units / Tube 50 Units / Tube 50 Units / Tube 800 Units / Reel 50 Units / Tube 50 Units / Tube 50 Units / Tube 800 Units / Reel 50 Units / Tube 50 Units / Tube Preliminary Information 12 TO-263-5 TO-220-5 TO-220-5B TO-263-5 GM7130HVV2.00 3 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Absolute Maximum Ratings (Note 1) Rating Maximum Supply Voltage ON/OFF Pin Input Voltage Feedback Pin Voltage Output Voltage to Ground (Steady State) Power Dissipation Storage Temperature Range Maximum Junction Temperature Operating Temperature Range Minimum EDS Rating (Note 2) Lead Temperature (Soldering, 10 sec) Value 63 -0.3 + VIN + 0.3 -0.3 + VIN + 0.3 -1.0 Internally Limited - 65 to 150 + 150 - 40 to 125 2 + 260 Unit V V V V °C °C ℃ kV °C B lock Diagram FB 4 R2* Preliminary Information VIN 1 Error Amplifier Comparator Driver 1.23V Reference 52KHz Oscillator Thermal Shutdown & Current Limit Reset Regulator With Enable 5 ON/OFF R1 1.0K 3 Gnd 2 VOUT VOUT = 3.3V, R2 = 1.7K VOUT = 5.0V, R2 = 3.1K VOUT = 12V, R2 = 8.84K VOUT = ADJ, R1 = OPEN, R2 = 0Ω GM7130HVV2.00 4 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Electrical Characteristics: GM7130HV-ADJ (Specifications with standard type face are for TJ = 25℃, and those with bold face type apply over full Operating Temperature rage) Parameter Feedback Voltage Condition (Note 3) VIN = 12V, ILOAD = 0.5A, VOUT = 5V, Circuit of Fig 2. 8.0V < VIN < 60V, 0.5A < ILOAD < 3A, VOUT = 5V, Circuit of Fig 2. VIN =12V, ILOAD=3.0A, VOUT = 5V Symbol Min 1.217 Typ Max 1.243 Unit VOUT 1.193 1.180 1.230 1.267 1.280 V Efficiency η 77 % Electrical Characteristics: GM7130HV-3.3 (Specifications with standard type face are for T = 25℃, and those with bold face type apply over full Operating Temperature rage) Parameter Condition (Note 3) VIN = 12V, ILOAD = 0.5A, Circuit of Fig 2. Symbol Min 3.234 Typ Max 3.366 Unit Output Voltage 6V < VIN < 60V, 0.5A < ILOAD < 3A, Circuit of Fig 2 VIN =12V, ILOAD=3.0A VOUT 3.168 3.135 3.300 3.432 3.465 V Efficiency η 75 % Electrical Characteristics: GM7130HV-5.0 Parameter Condition (Note 3) (Specifications with standard type face are for T = 25℃, and those with bold face type apply over full Operating Temperature rage) VIN = 12V, ILOAD = 0.5A, Circuit of Fig 2. Output Voltage 8V < VIN < 60V, 0.5A < ILOAD < 3A, Circuit of Fig 2. Efficiency VIN =12V, ILOAD=3.0A Preliminary Information Symbol Min 4.900 VOUT 4.800 4.750 η Typ Max 5.100 5.200 5.250 Unit 5.000 V 77 % Electrical Characteristics: GM7130HV-12 (Specifications with standard type face are for T = 25℃, and those with bold face type apply over full Operating Temperature rage) Parameter Condition (Note 3) VIN = 25V, ILOAD = 0.5A, Circuit of Fig 2. Symbol Min 11.76 Typ Max 12.24 Unit Output Voltage 15V < VIN < 60V, 0.5A < ILOAD < 3A, Circuit of Fig 2. VIN =15V, ILOAD=3.0A VOUT 11.52 11.40 12.00 12.48 12.60 V Efficiency η 88 % GM7130HVV2.00 5 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Electrical Characteristics: All Output Voltage Versions (Specifications with standard type face are for TJ = 25°C, and those with bold face type apply over full Operating Temperature rage. Unless otherwise specified, VIN = 12V for 3.3V, 5.0V and Adj version, VIN = 25V for 12V version, ILOAD = 500mA) Parameter Feedback Bias Current Oscillator Frequency Saturation Voltage Max Duty Cycle (ON) Current Limit Output Leakage Current Quiescent Current Standby Quiescent Current Condition VOUT =5V (Adjustable Version Only) Symbol Ib Min 47 42 Typ 50 Max 100 500 58 63 Unit nA (Note 8) fo 52 kHz lOUT = 3A (Notes 4) (Note 5) Peak Current (Notes 4, 8) Output =0V (Notes 6, 7) Output = -1V (Notes 6, 7) (Note 6) VSAT DC lCL 93 4.2 3.5 1.4 98 5.8 1.8 2.0 6.9 7.5 V % A lL lQ ON/OFF= 5V (OFF) Low (ON) ON/OFF Pin Logic lnput Level Preliminary Information lSTBY VIH VIL IH IL 2.2 2.4 - 7.5 5 50 2 30 10 200 1.0 0.8 mA mA µA 1.2 V High (OFF) 1.4 12 0 30 10 µA ON/OFF Pin Input Current VLOGlC = 2.5V (OFF) VLOGlC = 0.5V (ON) Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. Note 2: All limits guaranteed at room temperature (standard type face) and at temperature extremes (bold type face). GM7130HVV2.00 6 Note 3: External components such as the catch diode, inductor, input and output capacitors can affect switching regulator system performance. When the GM7130HV is used as shown in the Figure 2 test circuit, system performance will be as shown in system parameters section of Electrical characteristics. Note 4: Output pin sourcing current. No diode, inductor or capacitor connected to output. Note 5: Feedback pin removed from output and connected to 0V. Note 6: Feedback pin removed from output and connected to +12V for the Adjustable, 3.3V, and 5V, versions, and +25V for the 12V and 15V versions, to force the output transistor OFF. Note 7: VIN =40V (60V for high voltage version). Note 8: The oscillator frequency reduces to approximately 11 kHz in the event of an output short or an overload which causes the regulated output voltage to drop approximately 40% from the nominal output voltage. This self protections feature lowers the average power dissipation of the IC by lowering the minimum duty cycle from 5% down to approximately GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS T est Circuit and Layout Guidelines C areful layout is important with any switching regulators. Rapidly switching currents associated with wiring inductance generate voltage transients which can cause problems. To minimize inductance and ground loops, the lengths of the leads indicated by heavy lines in Figure 1&2 below should be kept as short as possible. Single point grounding (as indicated or ground plane construction should be used for best results. When using the Adjustable version, place the programming resistors as close as possible to GM2576, to keep the sensitive feedback wiring short. 1 VIN VIN Unregulatedd DC Input CIN 100µF 4 Feedback GM7130HV-x.x 3 GND 5 ON/OFF 2 Output L1 100µH D1 D1 MBR360 COUT 1000µF VOUT L O A D Preliminary Information Figure 1 Fixed Ouput Votlage Versions CIN = 100µF, 75V, Aluminum Electrolytic COUT = 1000µF, 25V, Aluminum Electrolytic D1 = Schottky, MBR360 L1 = 100µH 1 VIN VIN Unregulatedd DC Input CIN 100µF 3 GND 4 FB GM7130HV-ADJ 2 VOUT L1 100µH R2 D1 MBR360 COUT 1000µF VOUT 5.0V L O A D 5 ON/OFF R1 Figure 2 Adjustable Ouput Votlage Versions CIN = 100µF, 75V, Aluminum Electrolytic COUT = 1000µF, 25V, Aluminum Electrolytic D1 = Schottky L1 = 100µH VOUT = VREF (1 + R2/R1) where VREF = 1.23V and R1 is between 1K to 5K GM7130HVV2.00 7 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS Package Outline Dimensions – TO-263-5 0.389 - 0.408 (9.88 - 10.18) 0.061 - 0.069 (1.56 - 1.76) 0.176 - 0.184 (4.47 - 4.67) 0.046 - 0.054 (1.17 - 1.37) 0.322 - 0.339 (8.20 - 8.60) 0.028 - 0.036 (0.71 - 0.91) 0.596 - 0.612 (15.14 - 15.54) 7 3 0.200 - 0.216 (5.08 - 5.48) 0-8 0.224 - 0.272 (5.70 - 6.90) 0.067 typ (1.70) o o 0.092 - 0.108 (2.34 - 2.74) 0.012 - 0.021 (0.31 - 0.53) Package Outline Dimensions – TO-220-5 0.400 + 0.015 0.400 - 0.005 (0.38 + 0.18) (0.38 - 0.03) Preliminary Information 0.048 - 0.052 (1.22 - 1.32) 0.100 - 0.120 (2.54 - 3.05) 0.149 - 0.153 (3.78 - 3.89) 0.525 - 0.555 (13.34 - 14.10) 0.175 - 0.185 (4.45 - 4.75) 0.240 - 0.260 (6.10 - 6.60) 0.330 - 0.350 (8.38 - 8.89) GM7130HVV2.00 0.525 - 0.555 (13.34 - 14.10) 0.030 - 0.040 (0.76 - 1.02) 0.057 - 0.077 (1.45 - 1.96) 0.105 + 0.010 0.105 - 0.010 (2.67 + 0.25) (2.67 - 0.38) 0.015 + 0.007 0.015 - 0.001 (0.38 + 0.18) (0.38 - 0.03) 8 GM7130HV 3A STEP DOWN VOLTAGE SWITCHING REGULATORS O rdering Number G M 7130HV A APM Gamma Micro Circuit Type Output Voltage A: Adj 3.3 = 3.3V 5.0 = 5.0V 12 = 12.0V TA5 Package Type TA5: TO263-5 TB5: TO-220-5 TB5B: TO-220B-5 R Shipping Type R:Taping & Reel T:Tube G Blank: Pb-free G: Green Preliminary Information 80 1 6 GM7130HVV2.00 9