GM7808-TA3T

Description The GM7800 series are classic regulators, which are useful in a wide range of applications. For example, you can use them for local on-card regulation to eliminate the distribution and problems associated with single point regulation. The wide range of output voltages (5V to 27V) make them useful in an endless list of applications. Although designed as fixed voltage regulators, you can add a few external components to make adjustable voltages and currents. Current limiting prevents the peak output current to a safe value. Safe-area protection of the output transistor limits internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit activates to prevent the regulator from overheating. These versatile workhorses are easy to use. You do not need to bypass the output, although this does improve transient response. Input bypass is needed only if you place the regulator far from the filter capacitor of the power supply. The GM7800 series is available in TO-220, TO-252 and TO-263 packages. Features Output current up to 1.5A Output Voltages 5V, 6V, 8V, 8.5V, 9V, 10V, 12V, 15V, 18V, 20V, 24V and 27V 3- Terminal Regulators Internal Thermal Overload Protection Internal Short-Circuit Current Limiting Output Transistor Safe-Area Protection TO-220, TO-252 and TO-263 Packages High Power Dissipation Capability Direct replacements for LM78xx Application Post-Regulator Switching DC/DC Converters Bias Supply for Analog Circuits Instrumentation and Audio Systems Logic Systems Others too numerous to mention TYPIC APPLICATION CIRCUITS VIN GM7800 VOUT 1.5A 0.33µF 0.1µF GND For a positive regulator, a 0.33µF bypass capacitor should be used on the input terminals. While not necessary for stability, an output capacitor of 0.1µF may be used to improve the transient response of the regulator. These capacitors should be on or as near as possible to the regulator terminals . w ww.gammamicro.com GM7800 SERIES V0.1 1 MARKING INFORMATION & PIN CONFIGURATIONS (TOP VIEW) TO-263-2 (D PAK) 2 TO-220 TO-252-3 (DPAK) GM78VV AYWW GM78VV AYWW GM78VV AYWW VV A Y WW =Output Voltage(05: 5.0V, 12: 12V) =Assembly Location =Year =Weekly INPUT GND OUTPUT INPUT GND OUTPUT VIN VOUT TAB is GND ORDERING INFORMATION Pro Number GM7805 GM7806 GM7808 GM7885 GM7809 GM7810 GM7812 GM7815 GM7818 GM7820 GM7824 GM7827 VOUT 5.0V 6.0V 8.0V 8.5V 9.0V 10V 12V 15V 18V 20V 24V 27V Package TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 TO-263, TO-220, TO-252 * For detail Ordering Number identification, please see last page. GM7800 SERIES RECOMMENDED OPERATING CONDITIONS (IO= 1.5A) PARAMETER GM7805 GM7806 GM7808 GM7885 GM7809 GM7810 GM7812 GM7815 GM7818 GM7820 GM7824 GM7827 MIN 7 8 10.5 10.5 11.5 12.5 14.5 17.5 21 23 27 30 0 MAX 25 25 25 25 27 28 30 30 33 36 38 40 1.5 125 UNIT Input Voltage VI V 2 Output Current, IO Operating virtual junction temperature, TJ A °C ABSOLUTE MAXIMUM RATINGS PARAMETER GM7824, GM7827 VALUE 40 UNIT V Input Voltage All others 35 2 W 15 0 to +150 -65 to +150 260 °C Continuous Total Dissipation at 25°C free-air temperature Continuous Total Dissipation at (or bellow) 25°C case Temperature Operating free-air, case, or virtual junctions Temperature Range Storage Temperature Range Lead Temperature 1.6mm (1/16 inch) from case for 10seconds SCHEMATIC BLOCK DIAGRAM INPUT Q11 R13 10k D2 D1 6.3V R12 200 Q13 Q14 Q15 Q12 Q16 R10 1k R15 2k R14 230 R16 0.3k OUTPUT R17 R1 30k Q1 Q6 VREF R9 4k R2 1.9k R7 17k C1 20pF Q10 Q7 Q8 Q3 Q5 R8 4k R18 2.6k Q2 R3 26 Q4 R4 1.2k R5 12.1k R6 1k Q9 GND GM7800 SERIES 3 ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7805: VI= 10V, IO= 500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=7V to 20V, P VI=7V to 25V VI=8V to 12V VI=8V to 18V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 7V to 25V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 4.8 4.75 TYP 5.0 5.0 3 1 MAX 5.2 5.25 100 50 100 50 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 62 78 15 5 0.017 -1.1 40 2.0 4.2 8 1.3 0.5 750 2.2 mA mA mA A GM7806: VI= 11V, IO= 500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=8V to 21V, P VI=8V to 25V VI=9V to 13V VI=9V to 19V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 8V to 25V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 5.75 5.7 TYP 6 6 5 1.5 MAX 6.25 6.3 120 60 120 60 UNIT V Input Regulation Ripple Rejection mV dB mV W mV/°C µV V 59 75 14 4 0.019 -0.8 45 2.0 4.3 8 1.3 0.5 550 2.2 GM7800 SERIES Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings 4 ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7808: VI=14V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=10.5V to 23V, P VI=10.5V to 25V VI=11V to 17V VI=11.5V to 21.5V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 10.5V to 25V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 7.7 7.6 TYP 8 8 6 2 MAX 8.3 8.4 160 80 160 80 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 55 72 12 4 0.016 -0.8 52 2.0 4.3 8 1.0 0.5 450 2.2 mA mA mA A GM7885: VI=15V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=11.5V to 23.5V, P VI=10.5V to 25V VI=11V to 17V VI=11.5V to 21.5V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 10.5V to 25V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 8.15 8.1 TYP 8.5 8.5 6 2 MAX 8.85 8.9 170 85 170 85 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W 54 70 12 4 0.016 -0.8 55 2.0 4.3 8 1.0 0.5 450 2.2 µV V mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings GM7800 SERIES 5 mV/°C ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7809: VI=16V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=11.5V to 24V, P VI=11.5V to 27V VI=13V to 19V VI=12V to 22V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 11.5V to 27V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 8.65 8.55 TYP 9 9 7 2 MAX 9.35 9.45 180 90 180 90 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 55 70 12 4 0.018 -1.0 60 2.0 4.3 8 1.0 0.5 400 2.2 mA mA mA A GM7810: VI= 17V, IO= 500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=12.5V to 25V, P VI=12.5V to 28V VI=14V to 20V VI=13V to 23V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 12.5V to 28V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 9.6 9.5 TYP 10 10 7 2 MAX 10.4 10.5 200 100 200 100 UNIT V Input Regulation Ripple Rejection Output Regulation mV dB mV W mV/°C µV V 55 71 12 4 0.018 -1.0 70 2.0 4.3 8 1.0 0.5 400 2.2 GM7800 SERIES Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings 6 ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7812: VI=19V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=14.5V to 27V, P VI=14.5V to 30V VI=16V to 22V VI=15V to 25V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 14.5V to 30V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 11.5 11.4 TYP 12 12 10 3 MAX 12.5 12.6 240 120 240 120 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 55 71 12 4 0.018 -1.0 75 2.0 4.3 8 1.0 0.5 350 2.2 mA mA mA A GM7815: VI=23V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=17.5V to 30V, P VI=17.5V to 30V VI=20V to 26V VI=18.5V to 28.5V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 17.5V to 30V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 14.4 14.25 TYP 15 15 12 3 MAX 15.6 15.75 300 150 300 150 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV 54 70 12 4 0.019 -1.0 90 2.0 4.3 8 1.0 0.5 230 2.1 mV/°C µV V mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings GM7800 SERIES 7 W ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7818: VI=27V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=21V to 33V, P VI=21V to 33V VI=24V to 30V VI=22V to 32V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 21V to 33V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 17.3 17.1 TYP 18 18 15 5 MAX 18.7 18.9 360 180 360 180 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 53 69 12 4 0.022 -1.0 110 2.0 4.5 8 1.0 0.5 200 2.1 mA mA mA A GM7820: VI=29V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=23V to 35V, P VI=23V to 35V VI=26V to 32V VI=24V to 34V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 23V to 35V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 19.2 19 TYP 20 20 18 7 MAX 20.8 21 400 200 400 200 UNIT V Input Regulation Ripple Rejection Output Regulation mV dB mV W mV/°C µV V 51 66 15 7 0.027 -1.3 150 2.0 4.5 8 1.0 0.5 180 2.1 GM7800 SERIES Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings 8 ELECTRICAL CHARACTERISTICS at specified Junction Temperature GM7824: VI=33V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=27V to 38V, P VI=27V to 38V VI=30V to 36V VI=28V to 32V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 27V to 38V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 23 22.8 TYP 24 24 18 6 MAX 25 25.2 480 240 480 240 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB mV W mV/°C µV V 50 66 12 4 0.028 -1.5 170 2.0 4.6 8 1.0 0.5 150 2.1 mA mA mA A GM7827: VI=36V, IO=500mA, (unless otherwise noted) CHARACTERISTICS Output Voltage ** TEST CONDITIONS * 25°C IO= 5mA to 1A VI=30V to 40V, P VI=30V to 40V VI=33V to 39V VI=30V to 40V, f = 120Hz IO=5mA to 1.5A IO=250mA to 750mA f = 1kHz IO= 5mA f = 10Hz to 100kHz IO= 1A VI= 30V to 40V IO=5mA to 1A 15W 0°C to 125°C 25°C 0°C to 125°C 25°C 0°C to 125°C 0°C to 125°C 25°C 25°C 25°C 0°C to 125°C 25°C 25°C MIN 25.9 25.7 TYP 27 27 25 10 MAX 28.1 28.3 540 270 540 270 UNIT V Input Regulation Ripple Rejection Output Regulation Output Resistance Temperature Coefficient Output Voltage Output Noise Voltage Dropout Voltage Bias Current Bias Current Change Short-Circuit Output Current Peak Output Current mV dB 50 64 20 9 0.030 -1.6 200 2.0 4.8 8 1.0 0.5 120 2.1 W mV/°C µV V mA mA mA A *Pulse testing tehniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account. ** The specification applies only for DC power dissipation permitted by absolute maximum ratings GM7800 SERIES 9 mV TO-263-2 PACKAGE OUTLINE DIMENSIONS 9.90 ± 0.20 0.40 15° 1.20 3° 1.50 DP0.20 9.20 ± 0.20 4.50 ± 0.20 1.30 -0.05 +0.1 P ad Layout 0.63 17.02 0.33 8.38 3° 0.10 ± 0.01 R0.30 2.40 ± 0.20 2.54 ± 0.10 0.50 -0.05 10.0 ± 0.20 7.0 4.0 0.04 1.016 +0.1 0.12 3.05 15.3 ± 0.20 3° 1.4 ± 0.20 4.90 ± 0.20 0.90 ± 0.10 1.27 ± 0.10 2.54 TYP (2.54 ± 0.20) 0.75 R0.30 2.00 ± 0.10 0.42 10.66 0.24 6.096 0.40 3° R 0.3 R 0.45 7.2 9.20 ± 0.20 3° 0.90 ( Inches ) mm 10.00 ± 0.20 4.90 ± 0.20 Unit: mm TO-220 PACKAGE OUTLINE DIMENSIONS 9.90 ± 0.20 3.60 ± 0.20 1.30 ± 0.10 1.70 1.50 DP0.20 3.70 ± 0.20 15.90 ± 0.20 4.60 18.95 MAX 3° 8.70 2.80 ± 0.10 4.50 ± 0.20 8.0 +0.1 1.30 -0.05 7.0 GM7800 SERIES 9.20 ± 0.20 0.9 7.0 8.40 1.46 1.00 45° 3.00 3° 3° 13.08 ± 0.20 10.08 ± 0.30 1.27 ± 0.10 3-R0.2 2.54 TYP (2.54 ± 0.20) 0.80 ± 0.10 1.52 ± 0.10 0.50 -0.05 +0.1 2.40 ± 0.20 3° 3° 2 - R 0.3 10 10.00 ± 0.20 Unit: mm TO-252 PACKAGE OUTLINE DIMENSIONS 6.50 ± 0.05 5.340 ± 0.05 29° ± 0.5° REF 0.6 7° 2.30 ± 0.05 0.508 ± 0.0127 Pad Layout 0.244 6.20 0.118 3.0 1.0 ± 0.05 6.10 ± 0.05 7.20 ± 0.05 7° 0.070 ± 0.05 9.900 7° 0.75 ± 0.10 2.70 ± 0.10 R 0.25 ± 0.13 0.81 ± 0.038 1.525 ± 0.10 0.228 5.80 0.75 ± 0.10 0.89 ± 0.05 0.243 6.172 0.101 2.58 0.063 1.6 ( Inches ) mm R0.15 max 2° Unit: mm ORDERING NUMBER GM 78 00 TA3 T Gamma Micro. Circuit Type Output Voltage 05: 5.0V, 06: 6.0V 08: 8.0V, 8.5:8.5V 09: 9.0V, 10:10V 12: 12V, 15: 15V 18: 18V, 20: 20V 24: 24V, 27: 27V Package TA3: TO-263 50 Units/ Tube 800 Units/ Tape & Reel TB3: TO-220 80 Units/ Tube TC3: TO-252 80 Units/ Tube 2,500 Units/ Tape & Reel GM7800 SERIES 11 Shipping R: Tape & Reel T: Tube 12 GM7800 SERIES