1.5KE82A

1.5KE6.8 THRU 1.5KE440CA TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 440 Volts Case Style 1.5KE Peak Pulse Power - 1500 Watts FEATURES 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000µs waveform repetition rate (duty cycle): 0.05% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types ♦ For devices with V(BR) >10V, ID are typically less than 1.0µA ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension ♦ Includes 1N6267 thru 1N6303 0.042 (1.07) 0.038 (0.96) DIA. MECHANICAL DATA Case: Molded plastic body over passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) except for bi-directional Mounting Position: Any Weight: 0.045 ounce, 1.2 grams Dimensions in inches and (millimeters) DEVICES FOR BI-DIRECTIONAL APPLICATIONS For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440A (e.g. 1.5KE6.8C, 1.5KE440CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, Fig. 1) Peak pulse current with a 10/1000µs waveform (NOTE 1) PPPM IPPM PM(AV) Minimum 1500 SEE TABLE 1 Watts Amps Watts Steady state power dissipation at TL=75°C lead lengths, 0.375" (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) unidirectional only (NOTE 3) Maximum instantaneous forward voltage at 100A for unidirectional only (NOTE 4) Operating junction and storage temperature range 6.5 IFSM 200 Amps VF TJ, TSTG 3.5/5.0 -55 to +175 Volts °C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum (4) VF=3.5V for devices of V(BR)≤220V and VF=5.0 Volt max. for devices of V(BR)>220V 1/21/99 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 General Semiconductor PART NUMBER +1.5KE6.8 +1.5KE6.8A +1.5KE7.5 +1.5KE7.5A +1.5KE8.2 +1.5KE8.2A +1.5KE9.1 +1.5KE9.1A +1.5KE10 +1.5KE10A +1.5KE11 +1.5KE11A +1.5KE12 +1.5KE12A +1.5KE13 +1.5KE13A +1.5KE15 +1.5KE15A +1.5KE16 +1.5KE16A +1.5KE18 +1.5KE18A +1.5KE20 +1.5KE20A +1.5KE22 +1.5KE22A +1.5KE24 +1.5KE24A +1.5KE27 +1.5KE27A +1.5KE30 +1.5KE30A +1.5KE33 +1.5KE33A +1.5KE36 +1.5KE36A +1.5KE39 +1.5KE39A +1.5KE43 +1.5KE43A +1.5KE47 +1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A 1.5KE62 1.5KE62A 1.5KE68 Breakdown Voltage V(BR) (Volts) (NOTE 1) Min 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 Max 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.8 58.8 68.2 65.1 74.8 Test Current at IT (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 Maximum Reverse Leakage at VWM ID (NOTE 4) (µA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (NOTE 2) JEDEC TYPE NUMBER 1N6267 1N6267A 1N6268 1N6268A 1N6269 1N6269A 1N6270 1N6270A 1N6271 1N6271A 1N6272 1N6272A 1N6273 1N6273A 1N6274 1N6274A 1N6275 1N6275A 1N6276 1N6276A 1N6277 1N6277A 1N6278 1N6278A 1N6279 1N6279A 1N6280 1N6280A 1N6281 1N6281A 1N6282 1N6282A 1N6283 1N6283A 1N6284 1N6284A 1N6285 1N6285A 1N6286 1N6286A 1N6287 1N6287A 1N6288 1N6288A 1N6289 1N6289A 1N6290 1N6290A 1N6291 Amps 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 16.9 17.6 15.3 Maximum Clamping Voltage at IPPM Vc (Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 Maximum Temperature Coefficient of V(BR) (% / °C) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.089 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 ELECTRICAL CHARACTERISTICS at (TA=25 C unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR) (Volts) (NOTE 1) Min 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 136 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 333 360 380 396 418 Max 71.4 82.5 78.8 90.2 86.1 100.0 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 Maximum Reverse Leakage at VWM ID (NOTE 4) (µA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (NOTE 2) JEDEC TYPE NUMBER 1N6291A 1N6292 1N6292A 1N6293 1N6293A 1N6294 1N6294A 1N6295 1N6295A 1N6296 1N6296A 1N6297 1N6297A 1N6298 1N6298A 1N6299 1N6299A 1N6300 1N6300A 1N6301 1N6301A 1N6302 1N6302A 1N6303 1N6303A General Semiconductor PART NUMBER 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE 110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A* 1.5KE220 1.5KE220A* 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A Test Current at (mA) IT 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (Volts) 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 Amps 16.3 13.9 14.6 12.7 13.3 11.5 12.0 10.4 10.9 9.5 9.9 8.7 9.1 8.0 8.4 7.0 7.2 6.5 6.8 6.1 6.4 5.8 6.1 5.2 5.5 4.4 4.6 4.2 4.4 3.5 3.6 3.0 3.1 2.6 2.7 2.4 2.5 Maximum Clamping Voltage at IPPM Vc (Volts) 92.0 109 104 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 Maximum Temperature Coefficient of V(BR) (% / °C) 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.106 0.106 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 NOTES: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bidirectional types with VR 10 volts and less the ID limit is doubled * Bidirectional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA, 1.5KE220CA) + UL listed for Telecom applications protection, 497B, file number E136766 for both uni-directional and bi-directional devices APPLICATION This series of Silicon Transient Suppressors is used in applications where large voltage transients can permanently damage voltage-sensitive components. The TVS diode can be used in applications where induced lightning on rural or remote transmission lines presents a hazard to electronic circuitry (ref: R.E.A. specification P.E. 60). This Transient Voltage Suppressor diode has a pulse power rating of 1500 watts for one millisecond. The response time of TVS diode clamping action is effectively instantaneous (1 x 10-9 seconds bidirectional); therefore, they can protect integrated circuits, MOS devices, hybrids, and other voltage sensitive semiconductors and components. TVS diodes can also be used in series or parallel to increase the peak power ratings. RATINGS AND CHARACTERISTIC CURVES 1.5KE6.8 THRU 1.5KE440CA FIG. 1 - PEAK PULSE POWER RATING CURVE FIG. 2 - PULSE DERATING CURVE 100 PPPM, PEAK PULSE POWER, kW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 100 PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % 10 75 50 1.0 25 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms td, PULSE WIDTH, sec. 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, °C FIG. 3 - PULSE WAVEFORM 150 IPPM, PEAK PULSE CURRENT, % tr=10µsec. PEAK VALUE IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 UNIDIRECTIONAL BIDIRECTIONAL CJ, CAPACITANCE , pF 100 HALF VALUE - IPP 2 1,000 VR=0 50 10/1000µsec. WAVEFORM as DEFINED by R.E.A. 100 f=1 MHz Vsig=50mVP-P TJ=25°C VR=RATED STAND-OFF VOLTAGE td 10 0 5 10 100 V(BR), BREAKDOWN VOLTAGE, VOLTS 500 0 1.0 2.0 t, TIME,ms 3.0 4.0 FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION, WATTS 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 25 50 75 100 125 150 175 200 1.6 x 1.6 x 0.040" (40 x 40 x 1mm.) COPPER HEAT SINKS FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNI-DIRECTIONAL ONLY PEAK FORWARD SURGE CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 200 L = 0.375” (9.5mm) LEAD LENGTHS 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max. 100 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 TL, LEAD TEMPERATURE,°C RATINGS AND CHARACTERISTIC CURVES 1.5KE6.8 THRU 1.5KE440CA FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL FIG. 8 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL 100 WAVEFORM: 8 X 20 IMPULSE ∆VC=VC-V(BR) 100 WAVEFORM: 10 X 1000 IMPULSE ∆VC=VC-V(BR) 1.5KE200 1.5KE130 1.5KE75 1.5KE200 1.5KE130 1.5KE100 ∆VC, INCREMENTAL CLAMPING VOLTAGE ∆VC, INCREMENTAL CLAMPING VOLTAGE 20 10 20 10 1.5KE75 1.5KE39 2.0 1.0 1.5KE39 1.5KE33 1.5KE6.8 1.5KE9.1 1.5KE18 1.5KE12 2.0 1.5KE33 1.0 1.5KE6.8 1.5KE9.1 0.2 0.1 0.5 0.2 0.1 0.5 1 2.0 10 20 50 1 2.0 10 50 IPP, PEAK PULSE CURRENT, AMPS IPP, PEAK PULSE CURRENT, AMPS FIG. 9 - INCREMENTAL CLAMPING VOLTAGE CURVE BI-DIRECTIONAL FIG. 10 - INCREMENTAL CLAMPING VOLTAGE CURVE BI-DIRECTIONAL 100 WAVEFORM: 8 X 20 IMPULSE ∆VC=VC-V(BR) 100 WAVEFORM: 10 X 1000 IMPULSE ∆VC=VC-V(BR) ∆VC, INCREMENTAL CLAMPING VOLTAGE 1.5KE200C ∆VC, INCREMENTAL CLAMPING VOLTAGE 20 10 1.5KE200C 20 1.5KE75C 10 1.5KE39C 1.5KE30C 1.5KE15C 1.5KE11C 1.5KE75C 1.5KE39C 2.0 1.0 1.5KE30C 1.5KE15C 1.5KE11C 1.5KE7.5C 2.0 1.0 1.5KE7.5C 0.2 0.1 0.5 0.2 0.1 0.5 1 2.0 10 20 50 1 2.0 10 20 50 IPP, PEAK PULSE CURRENT, AMPS IPP, PEAK PULSE CURRENT, AMPS RATINGS AND CHARACTERISTIC CURVES 1.5KE6.8 THRU 1.5KE440CA 100 Θv - TEMPERATURE COEFFICIENT - mV/ C FIG. 11 - INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE FIG. 12 - BREAKDOWN VOLTAGE TEMPERATURE COEFFICIENT CURVE 1,000 100 UNIDIRECTIONAL BIDIRECTIONAL FORWARD CURRENT 10 10 PULSE WIDTH=300µs 1% DUTY CYCLE TJ=25°C 1 1 5 10 20 50 100 200 500 V(BR), BREAKDOWN VOLTAGE, VOLTS 0.1 UNIDIRECTIONAL (ONLY) 0 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES