1N5417

1N5415 THRU 1N5420 GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes FEATURES E D Case Style G4 0.180 (4.6) 0.115 (2.9) DIA. 1.0 (25.4) MIN. 0.300 (7.6) MAX. ♦ Glass passivated cavity-free junction ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T 0.042 (1.07) 0.038 (0.962) DIA. 1.0 (25.4) MIN. * MECHANICAL DATA Case: Solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.037 ounce, 1.04 grams Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 UNITS *Maximum repetitive peak reverse voltage Maximum RMS voltage *Maximum DC blocking voltage *Minimum reverse breakdown voltage at 50µA *Maximum average forward rectified current 0.375” (9.5mm) lead lengths atTA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=100°C Maximum instantaneous forward voltage at 3.0A* 9.0A Maximum DC reverse current at rated DC blocking voltage *TA=25°C TA=100°C *TA=175°C VRRM VRMS VDC VBR I(AV) 50 35 50 55 100 70 100 110 200 140 200 220 3.0 400 280 400 440 500 350 500 550 600 420 600 660 Volts Volts Volts Volts Amps IFSM 80.0 1.10 1.50 1.0 20.0 2.0 150 200 175 150 22.0 -65 to +175 120 250 110 400 100 Amps VF Volts µA ns pF °C/W °C IR trr CJ RΘJA TJ,TSTG *Maximum reverse recovery time (NOTE 1) *Maximum junction capacitance (NOTE 2) Typical thermal resistance (NOTE3) *Operating and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink *JEDEC registered values 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5415 THRU 1N5420 FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES 4.0 L=0.375" (9.5mm) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 200 3.0 2.0 1.0 RESISTIVE OR INDUCTIVE LOAD 0.8 x 0.8 x .040" (20 x 20 x 1mm) COPPER HEATSINKS TA=100°C 8.3ms SINGLE HALF-WAVE SINE-WAVE (JEDEC Method) 100 0 0 25 50 75 100 125 150 175 200 AMBIENT TEMPERATURE,°C 10 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 -TYPICAL REVERSE CHARACTERISTICS 50 30 10 INSTANTANEOUS FORWARD CURRENT, AMPERES AVERAGE REVERSE CURRENT, MICROAMPERES TJ=150°C 10 TJ=25°C PULSE WIDTH=300µs 1%DUTY CYCLE TJ=125°C 1 1 TJ=75°C 0.1 0.1 TJ=25°C 0.01 0.4 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100