1N5620

1N5614 THRU 1N5622 GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER Reverse Voltage - 200 to 1000 Volts D TE * DO-204AP Forward Current - 1.0. Ampere FEATURES N TE PA 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. ♦ High temperature metallurgically bonded construction ♦ 1.0 Ampere operation at TA= 55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.150 (3.8) 0.100 (2.5) DIA. MECHANICAL DATA 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5614 1N5616 1N5618 1N5620 1N5622 UNITS * Maximum repetitive peak reverse voltage Maximum RMS voltage * Maximum DC blocking voltage * Minimum reverse breakdown voltage at 50µA Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=55°C * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) * Maximum instantaneous forward voltage at 1.0A * Maximum DC reverse current at rated DC blocking voltage * Maximum reverse recovery time (NOTE 1) Maximum junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) * Operating junction temperature range * Storage temperature range TA=25°C TA=100°C TA=200°C VRRM VRMS VDC VBR I(AV) 200 140 200 220 400 280 400 440 600 420 600 660 1.0 800 560 800 880 1000 700 1000 1100 Volts Volts Volts Volts Amp IFSM VF IR trr CJ RΘJA TJ TSTG 45 35 50.0 1.2 0.5 25.0 1500 2.0 25 55.0 -65 to +175 -65 to +200 20 15 Amps Volts µA µs pF °C/W °C °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 12 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted *JEDEC registered values 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5614 THRU 1N5622 FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 50 PEAK FORWARD SURGE CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 0.75 30 0.5 20 0.25 10 0 25 50 75 100 125 150 175 0 1 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=150°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=125°C 1 1 TJ=25°C TJ=75°C 0.1 0.1 TJ= 25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 TJ=25°C f=1.0 MHz Vsig=50mVp-p JUNCTION CAPACITANCE, pF 10 1 1 10 REVERSE VOLTAGE, VOLTS 100