1N5624

1N5624 THRU 1N5627 GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 200 to 800 Volts D * CASE STYLE G3 Forward Current - 3.0 Amperes FEATURES ♦ Glass passivated cavity-free junction ♦ High temperature metallurgically bonded constructed ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Typical IR less than 0.1µA ♦ 3.0 Ampere operation at TA=70°C with no thermal runaway ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E 1.0 (25.4) MIN 0.250 (6.3) 0.170 (4.3) DIA. 0.300 (7.6) MAX. 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN MECHANICAL DATA Case: Solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5624 1N5625 1N5626 1N5627 UNITS *Maximum repetitive peak reverse voltage Maximum RMS voltage *Maximum DC blocking voltage *Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=70°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) *Maximum instantaneous forward voltage at 3.0A TA=25°C TA=70°C *Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=175°C VRRM VRMS VDC I(AV IFSM 200 140 200 400 280 400 3.0 125.0 600 420 600 800 560 800 Volts Volts Volts Amps Amps VF 1.0 0.95 5.0 300.0 150.0 40.0 20.0 10.0 -65 to +175 -65 to +200 200.0 100.0 Volts µA µA pF °C/W °C °C IR IR(AV) CJ RΘJA RΘJL TJ TSTG *Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TA=70°C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) *Operating junction temperature range *Storage temperature range NOTES: (1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, with both leads attached between heatsinks *JEDEC registered values 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5624 THRU 1N5627 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 60 HZ RESISTIVE OR INDUCTIVE LOAD AVERAGE FORWARD CURRENT, AMPERES 4.0 3.0 2.0 1.0 0.375" (9.5mm) LEAD LENGTH 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE,°C 10 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 30 10.0 10 INSTANTANEOUS FORWARD CURRENT, AMPERES AVERAGE FORWARD CURRENT, MICROAMPERES 1 TJ=100°C TJ=150°C TJ=25°C 1 PULSE WIDTH=300µs 1% DUTY CYCLE TJ=75°C 0.1 0.1 TJ=25°C 0.01 0.2 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 60 80 100 INSTANTANEOUS FORWARD REVERSE VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100