1N5624GP

1N5624GP THRU 1N5627GP GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 200 to 800 Volts * DO-201AD Forward Current - 3.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 3.0 Ampere operation at TA=70°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length 5 lbs. (2.3kg) tension N T E D P A T E 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MECHANICAL DATA Case: JEDEC DO-201AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.12 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS . atings at 25°C ambient temperature unless otherwise specified. R SYMBOLS 1N5624GP 1N5625GP 1N5626GP 1N5627GP UNITS * Maximum repetitive peak reverse voltage * Maximum DC blocking voltage * Maximum average forward rectified current 0.375" (9.5mm) lead lengths at TA=70°C * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) * Maximum instantaneous forward voltage at 3.0A Maximum reverse current at rated DC blocking voltage Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TA=70°C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=70°C TA=25°C TA=150°C VRRM VDC I(AV) 200 200 400 400 3.0 600 600 800 800 Volts Volts Amps IFSM 125.0 1.0 0.95 5.0 300.0 200.0 3.0 40.0 20.0 -65 to +175 200.0 Amps VF IR IR(AV) trr CJ RΘJA TJ, TSTG Volts µA µA µs pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted *JEDEC Values 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5624GP THRU 1N5627GP AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 4.0 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 60 HZ RESISTIVE OR INDUCTIVE LOAD 3.0 100 2.0 1.0 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=150°C INSTANTANEOUS FORWARD CURRENT, AMPERES 1 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=100°C 0.1 TJ=25°C 1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100