BYM07-150

BYM07-50 THRU BYM07-400 EGL34A THRU EGL34G SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER Reverse Voltage - 50 to 400 Volts * D DO-213AA SOLDERABLE ENDS 1st BAND 2nd BAND Forward Current - 0.5 Ampere FEATURES E D2 D1= 0.066 0.060 (1.676) (1.524) 0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) 1st band denotes type and polarity 2cnd band denotes voltage type D2 = D1 + 0 - 0.008 (0.20) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ For surface mount applications ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 450°C/5 seconds at terminals. Complete device submersible temperature of 260°C for 10 seconds in solder bath P A T E N T MECHANICAL DATA Case: JEDEC DO-213AA molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end -1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 ounce, 0.036 gram Dimensions in inches and (millimeters) *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYM07 -50 EGL34A GRAY BYM07 -100 EGL34B RED BYM07 -150 EGL34C PINK BYM07 -200 EGL34D ORANGE BYM07 -300 BYM07 -400 UNITS Fast efficient device: 1st band is Green Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT=75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 0.5A Maximum DC reverse current at rated DC blocking voltage Maximum full load reverse current, full cycle average at TA=55°C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) (NOTE 4) EGL34F EGL34G BROWN YELLOW VRRM VRMS VDC I(AV) IFSM VF IR IR(AV) trr CJ RΘJA RΘJT TJ, TSTG 50 35 50 100 70 100 150 105 150 0.5 200 140 200 300 210 300 400 280 400 Volts Volts Volts Amp Amps 10.0 1.25 5.0 50.0 50.0 50.0 7.0 150.0 70.0 -65 to +175 1.35 Volts µA µA ns pF °C/W °C TA=25°C TA=125°C Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal 4/98 RATINGS AND CHARACTERISTIC CURVES BYM07-50 THRU BYM07-400 / EGL34A THRU EGL34G FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.5 PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 12 10 8.0 6.0 4.0 2.0 0 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 175 1 10 NUMBER OF CYCLES AT 60 HZ 100 TERMINAL TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 50 PULSE WIDTH=300µs 1% DUTY CYCLE 100 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 10 TJ=150°C TJ=150°C 1 TJ=25°C 1 TJ=125°C 0.1 TJ=75°C 0.1 EGL34A - EGL34D EGL34F & EGL34G 0.01 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.001 0 TJ=25°C INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE 35 JUNCTION CAPACITANCE, pF 100 TRANSIENT THERMAL IMPEDANCE, °C/W TJ=25°C f=1.0 MHZ Vsig=50mVp-p 30 25 20 15 10 5 0 0.1 10 1 1 10 100 0.1 0.01 0.1 t, PULSE DURATION, sec. 1 10 100 REVERSE VOLTAGE, VOLTS