BYV96E

BYV95 AND BYV96 SERIES MINIATURE GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 200 to 1000 Volts * D DO-204AP Forward Current - 1.5 Amperes FEATURES P A T 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ 1.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension E N T E 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYV95A BYV95B BYV95C BYV96D BYV96E UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Minimum avalanche breakdown voltage at 100µA Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=55°C Peak forward surge current, 10ms single half sinewave superimposed on rated load at TJ=165°C Maximum instantaneous forward voltage at 1.5A TJ =25°C TJ=165°C VRRM VRMS VDC V(BR) I(AV) IFSM 200 140 200 300 400 280 400 500 600 420 600 700 1.5 35.0 800 560 800 900 1000 700 1000 1100 Volts Volts Volts Volts Amps Amps VF 1.6 1.35 1.0 150.0 2.0 250 10.0 55.0 -65 to +175 -65 to +200 300 Volts µA µA ns pF °C/W °C °C Maximum full load reverse current, full cycle average, 0.375”, (9.5mm) TJ=25°C lead length at TJ=165°C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance Storage temperature range (NOTE 3) IR(AV) IR trr CJ RΘJA TJ TSTG Operating junction temperature range NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES BYV95 AND BYV96 SERIES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.0 35 PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD TJ=165°C 10ms SINGLE HALF SINE-WAVE 1.5 30 25 20 15 10 1 10 NUMBER OF CYCLES AT 50 HZ 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125 150 175 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 20 10 1 PULSE WIDTH=300µs 1% DUTY CYCLE INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=100°C TJ=25°C TJ=125°C 1 0.1 TJ=75°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25°C 0.01 0 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 20 40 60 80 100 30 JUNCTION CAPACITANCE, pF PERCENT OF RATED PEAK REVERSE VOLTAGE, % TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 1 10 REVERSE VOLTAGE, VOLTS 100