BYWB29-150

BYWB29-50 THRU BYWB29-200 FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts TO-263 Forward Current - 8.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ Low power loss ♦ Low leakage current ♦ High surge current capability ♦ Superfast recovery time for high efficiency ♦ High temperature soldering in accordance with CECC 802 / Reflow guaranteed 0.380 (9.65) 0.420 (10.67) 0.245 (6.22) MIN K 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.320 (8.13) 0.360 (9.14) 1 K 2 0.575 (14.60) 0.625 (15.88) 0.047 (1.19) 0.055 (1.40) SEATING PLATE -T- 0.090 (2.29) 0.110 (2.79) 0.018 (0.46) 0.025 (0.64) 0.027 (0.686) 0.037 (0.940) 0.080 (2.03) 0.110 (2.79) MECHANICAL DATA Case: JEDEC TO-263AB molded plastic body Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.08 ounce, 2.24 grams 0.095 (2.41) 0.100 (2.54) PIN 1 K - HEATSINK PIN 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYWB29-50 BYWB29-100 BYWB29-150 BYWB29-200 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=125°C Peak forward surge current 10ms single half sine-wave superimposed TJ=150°C Maximum instantaneous forward voltage at: IF=20A, TJ=25°C IF=8A, TJ=150°C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) Operating and storage temperature range TC=25°C TC=100°C VRRM VRMS VDC I(AV) IFSM 50 35 50 100 70 100 8.0 100.0 150 105 150 200 140 200 Volts Volts Volts Amps Amps VF 1.3 0.8 10.0 500.0 25.0 45.0 3.0 -65 to +150 Volts µA ns pF °C/W °C IR trr CJ RΘJC TJ, TSTG NOTES: (1) Reverse recovery test conditions: IF=1A, VR=30V, di/dt=100A/µs, Irr=10%, IRM for measurement of trr (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case mounted on heatsink 4/98 RATINGS AND CHARACTERISTIC CURVES BYWB29-50 THRU BYWB29-200 FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 10 8.0 6.0 4.0 2.0 0 100 80 60 40 20 0 TJ=TJ max. 10ms SINGLE HALF SINE-WAVE (JEDEC Method) 0 50 100 150 1 10 NUMBER OF CYCLES AT 50 HZ 100 CASE TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 80 100 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES TJ=125°C PULSE WIDTH=300µs 1% DUTY CYCLE 10 TJ=100°C 1 1 0.1 0.1 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25°C 0.01 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 0 20 40 60 80 100 80 JUNCTION CAPACITANCE, pF 70 60 50 40 30 20 0.1 TJ=25°C f=1.0 MHZ Vsig=50mVp-p PERCENT OF RATED PEAK REVERSE VOLTAGE, % 1 10 100 REVERSE VOLTAGE, VOLTS