ES2C

ES2A THRU ES2D SURFACE MOUNT FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts DO-214AA Forward Current - 2.0 Amperes FEATURES 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) ¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ For surface mount applications ¨ Low profile package ¨ Built-in strain relief ¨ Ideal for automated placement ¨ Easy pick and place ¨ Glass passivated chip junction ¨ Superfast recovery times for high efficiency ¨ Low power loss, high efficiency ¨ High temperature soldering: 250¡C/10 seconds at terminals MECHANICAL DATA 0.008 (0.203) MAX. 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) 0.030 (0.76) Dimensions in inches and (millimeters) Case: JEDEC DO-214AA molded plastic body over passivated chip Terminals: Solder plated solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS ES2A ES2B ES2C ES2D UNITS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=110¡C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=110¡C Maximum instantaneous forward voltage at 2.0A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 2) EA VRRM VRMS VDC I(AV) 50 35 50 EB 100 70 100 2.0 EC 150 105 150 ED 200 140 200 Volts Volts Volts Amps IFSM VF IR trr trr Qrr CJ RQJA RQJL TJ, TSTG 50.0 0.90 10.0 350 20.0 30.0 50.0 10.0 25.0 18.0 75.0 20.0 -55 to +150 Amps Volts mA ns ns nC pF ¡C/W ¡C TA=25¡C TA=100¡C TJ=25¡C TJ=100¡C TJ=25¡C TJ=100¡C Maximum reverse recovery time (NOTE 1) Maximum stored charge (NOTE 2) Typical junction capacitance (NOTE 3) Maximum thermal resistance (NOTE 4) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR= I.0A, lrr=0.25A (2) Trr and Qrr measured at: IF=2.0A, VR=30V, di/dt=50A/ms, Irr=10% IR (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Units mounted on P.C.B. 5.0 x 5.0mm (0.013mm thick) land areas 2/10/99 RATING AND CHARACTERISTIC CURVES ES2A THRU ES2D FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2Ó (5.0 x 5.0mm) COPPER PAD AREAS FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 30 25 20 15 10 5.0 0 1 10 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at TL=110¡C 0 80 90 100 110 120 130 140 150 100 LEAD TEMPERATURE, ¡C NUMBER OF CYCLES AT 60 HZ FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1,000 50 INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ=125¡C TJ=25¡C PULSE WIDTH=300ms 1% DUTY CYCLE INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10 10 TJ=85¡C 1 1 TJ=25¡C 0.1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 100 FIG. 5 - TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK REVERSE VOLTAGE, % 14 JUNCTION CAPACITANCE, pF 100 TJ=25¡C f=1.0 MHZ Vsig=50mVp-p 12 10 8.0 10 6.0 4.0 2.0 0 0.1 1 10 100 1 0.1 1 10 100 REVERSE VOLTAGE, VOLTS