ES3A

ES3A THRU ES3D SURFACE MOUNT ULTRAFAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts DO-214AB Forward Current - 3.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mount applications ♦ Low profile package ♦ Built-in strain relief ♦ Ideal for automated placement ♦ Easy pick and place ♦ Superfast recovery time for high efficiency ♦ Glass passivated chip junction ♦ High temperature soldering: 250°C/10 seconds at terminals 0.126 (3.20) 0.114 (2.90) 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) MECHANICAL DATA 0.008 (0.203) MAX. 0.320 (8.13) 0.305 (7.75) 0.060 (1.52) 0.030 (0.76) Dimensions in inches and (millimeters) Case: JEDEC DO-214AB molded plastic body over passivated chip Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.007 ounces, 0.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS ES3A ES3B ES3C ES3D UNITS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=100°C Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time (NOTE 2) EA VRRM VRMS VDC I(AV) IFSM VF IR trr TJ=25°C TJ=100°C TJ=25°C TJ=100°C trr Qrr CJ RΘJA RΘJL TJ, TSTG 50 35 50 EB 100 70 100 3.0 100.0 0.90 10.0 500.0 20.0 30.0 50.0 15.0 35.0 45.0 47.0 12.0 EC 150 105 150 ED 200 140 200 Volts Volts Volts Amps Amps Volts µA ns ns nC pF °C/W °C TA=25°C TA=100°C Maximum stored charge (NOTE 2) Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) trr and Qrr measured at: VR=30V, di/dt=50A/µs, IF=3.0A, and Irr=10% IR (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Units mounted on P.C.B. with 0.31 x 0.31” (8.0 x 8.0mm) copper pad areas -55 to +150 4/98 RATING AND CHARACTERISTIC CURVES ES3A THRU ES3D FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 3.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 150 PEAK FORWARD SURGE CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at TL=100°C 125 100 75 50 25 0 1 10 NUMBER OF CYCLES AT 60 HZ 2.0 1.0 P.C.B. MOUNTED on 0.31 x 0.31” (8.0 x 8.0mm) COPPER PADS 0 80 90 100 110 120 130 140 150 100 LEAD TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 100 1,000 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C 10 PULSE WIDTH=300µs 1% DUTY CYCLE 100 TJ=100°C 10 1 TJ=75°C 1 0.1 TJ=25°C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 105 JUNCTION CAPACITANCE, pF 90 75 60 45 30 15 0 0.1 1 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 100 REVERSE VOLTAGE, VOLTS